Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Millview in the Atlas, the following communities of the 1890's would have been found near the current location of Millview. The following communities are listed based on their distance, with the one closest to Millview listed first.
- Clovercroft
(3 miles [4.8 km] to the northeast)
- Clovercroft is also located in Williamson County
- Jump to our Gazetteer entry for Clovercroft
- Peytonsville
(4 miles [6.4 km] to the south)
- Peytonsville is also located in Williamson County
- Jump to our Gazetteer entry for Peytonsville
- Arrington
(4 miles [6.4 km] to the east)
- Arno
(5 miles [8 km] to the southeast)
- Arno is also located in Williamson County
- Jump to our Gazetteer entry for Arno
- Franklin
(5 miles [8 km] to the northwest)
- West Harpeth
(6 miles [9.7 km] to the southwest)
- West Harpeth is also located in Williamson County
- Jump to our Gazetteer entry for West Harpeth
- Harpeth
(6 miles [9.7 km] to the southwest)
- Harpeth is also located in Williamson County
- Jump to our Gazetteer entry for Harpeth
- Carpenters ‑ Historic
(6 miles [9.7 km] to the north)
- Carpenters was located in Williamson County
- Jump to our Gazetteer entry for Carpenters
- Triune
(7 miles [11.3 km] to the east)
- Triune is also located in Williamson County
- Jump to our Gazetteer entry for Triune
- Callender ‑ Historic
(7 miles [11.3 km] to the north)
- Callender was located in Williamson County
- Jump to our Gazetteer entry for Callender
- Southall
(7 miles [11.3 km] to the west)
- Southall is also located in Williamson County
- Jump to our Gazetteer entry for Southall
- Thompson's Station
(8 miles [12.9 km] to the southwest)
- Thompson's Station is also located in Williamson County
- Jump to our Gazetteer entry for Thompson's Station
- Population from the 2020 Census: 6,973 people
- Former name for Thompson's Station:
- Littlebury
- Jump to TripAdvisor's Tourism page for Thompson's Station <2>
- Bethesda
(8 miles [12.9 km] to the south)
- Bethesda is also located in Williamson County
- Jump to our Gazetteer entry for Bethesda
- Nolensville
(8 miles [12.9 km] to the northeast)
- Brentwood
(8 miles [12.9 km] to the north)
- Duplex
(9 miles [14.5 km] to the south)
- Duplex is also located in Williamson County
- Jump to our Gazetteer entry for Duplex
- College Grove
(9 miles [14.5 km] to the southeast)
- Grassland
(9 miles [14.5 km] to the northwest)
- Grassland is also located in Williamson County
- Jump to our Gazetteer entry for Grassland
- Allisona
(10 miles [16.1 km] to the southeast)
- Allisona is located in Rutherford County
- Jump to our Gazetteer entry for Allisona
- Patterson
(10 miles [16.1 km] to the east)
- Patterson is located in Rutherford County
- Jump to our Gazetteer entry for Patterson
- Wrencoe
(10 miles [16.1 km] to the northeast)
- Wrencoe is located in Davidson County
- Jump to our Gazetteer entry for Wrencoe
- Forest Home
(10 miles [16.1 km] to the northwest)
- Forest Home is also located in Williamson County
- Jump to our Gazetteer entry for Forest Home
- Bingham
(10 miles [16.1 km] to the west)
- Bingham is also located in Williamson County
- Jump to our Gazetteer entry for Bingham
- Spring Hill
(11 miles [17.7 km] to the southwest)
- Beachville ‑ Historic
(11 miles [17.7 km] to the north)
- Beachville was located in Williamson County
- Jump to our Gazetteer entry for Beachville
- Almaville
(11 miles [17.7 km] to the east)
- Almaville is located in Rutherford County
- Jump to our Gazetteer entry for Almaville
- Rocky Fork
(11 miles [17.7 km] to the east)
- Rocky Fork is located in Rutherford County
- Jump to our Gazetteer entry for Rocky Fork
- Oglesby
(11 miles [17.7 km] to the north)
- Oglesby is located in Davidson County
- Jump to our Gazetteer entry for Oglesby
- Leipers Fork
(11 miles [17.7 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Millview, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |