Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Liberty Hill in the Atlas, the following communities of the 1890's would have been found near the current location of Liberty Hill. The following communities are listed based on their distance, with the one closest to Liberty Hill listed first.
- Maltsberger ‑ Historic
(Less than 2 miles to the northwest)
- Maltsberger is located in Greene County
- Jump to our Gazetteer entry for Maltsberger
- Swanay ‑ Historic
(2 miles [3.2 km] to the north)
- Swanay is located in Greene County
- Jump to our Gazetteer entry for Swanay
- Milburnton
(2 miles [3.2 km] to the east)
- Milburnton is located in Greene County
- Jump to our Gazetteer entry for Milburnton
- Jearoldstown
(3 miles [4.8 km] to the north)
- Jearoldstown is located in Greene County
- Jump to our Gazetteer entry for Jearoldstown
- Cedar Lane
(3 miles [4.8 km] to the northeast)
- Cedar Lane is located in Greene County
- Jump to our Gazetteer entry for Cedar Lane
- Newmansville
(4 miles [6.4 km] to the southwest)
- Newmansville is located in Greene County
- Jump to our Gazetteer entry for Newmansville
- Mill Brook
(4 miles [6.4 km] to the southeast)
- Mill Brook is located in Washington County
- Jump to our Gazetteer entry for Mill Brook
- Christie ‑ Historic
(4 miles [6.4 km] to the northeast)
- Christie is located in Washington County
- Jump to our Gazetteer entry for Christie
- Statemount ‑ Historic
(5 miles [8 km] to the southwest)
- Statemount is located in Greene County
- Jump to our Gazetteer entry for Statemount
- Rheatown
(5 miles [8 km] to the south)
- Rheatown is located in Greene County
- Jump to our Gazetteer entry for Rheatown
- Upchurch
(6 miles [9.7 km] to the southwest)
- Upchurch is located in Greene County
- Jump to our Gazetteer entry for Upchurch
- Limestone
(6 miles [9.7 km] to the southeast)
- Matuta ‑ Historic
(6 miles [9.7 km] to the southeast)
- Matuta is located in Washington County
- Jump to our Gazetteer entry for Matuta
- Bowmantown
(6 miles [9.7 km] to the east)
- Bowmantown is located in Washington County
- Jump to our Gazetteer entry for Bowmantown
- Population from the 2010 Census: 302 people
- Locust Mount
(6 miles [9.7 km] to the northeast)
- Locust Mount is located in Washington County
- Jump to our Gazetteer entry for Locust Mount
- Locust Springs
(6 miles [9.7 km] to the west)
- Locust Springs is located in Greene County
- Jump to our Gazetteer entry for Locust Springs
- Lovelace
(7 miles [11.3 km] to the north)
- Lovelace is located in Greene County
- Jump to our Gazetteer entry for Lovelace
- Afton
(8 miles [12.9 km] to the south)
- Broylesville
(8 miles [12.9 km] to the southeast)
- Broylesville is located in Washington County
- Jump to our Gazetteer entry for Broylesville
- Washington College
(8 miles [12.9 km] to the southeast)
- Washington College is located in Washington County
- Jump to our Gazetteer entry for Washington College
- Leesburg
(8 miles [12.9 km] to the east)
- Leesburg is located in Washington County
- Jump to our Gazetteer entry for Leesburg
- Chimneytop ‑ Historic
(8 miles [12.9 km] to the northwest)
- Chimneytop is located in Hawkins County
- Jump to our Gazetteer entry for Chimneytop
- Fall Branch
(8 miles [12.9 km] to the northeast)
- Van Hill
(8 miles [12.9 km] to the northwest)
- Van Hill is located in Hawkins County
- Jump to our Gazetteer entry for Van Hill
- Tusculum
(9 miles [14.5 km] to the south)
- Tusculum is located in Greene County
- Jump to our Gazetteer entry for Tusculum
- Population from the 2020 Census: 2,669 people
- Brownsboro ‑ Historic
(9 miles [14.5 km] to the southeast)
- Brownsboro is located in Washington County
- Jump to our Gazetteer entry for Brownsboro
- Telford
(9 miles [14.5 km] to the southeast)
- Harmony
(9 miles [14.5 km] to the northeast)
- Harmony is located in Washington County
- Jump to our Gazetteer entry for Harmony
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Liberty Hill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |