Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Hampton Mill, we use the following websites to find information relevant to Hampton Mill and the surrounding area.
- Weather ...
- Before heading outdoors, you should check the weather:
- The National Weather Service forecast for Hampton Mill
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Hampton Mill:
- 36.112882, -82.683758
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- The Heavens-Above Website, centered on Hampton Mill
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Greene County as the starting point when you click on the link below:
- eBird sighting report for Greene County
- Since Hampton Mill is near Washington County and also Madison County, we have provided a link to their eBird sighting reports:
- eBird sighting report for Washington County
- eBird sighting report for Madison County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Waymark.com
Curious and Interesting Names Near Hampton Mill ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Bethany
(2 miles [3.2 km] to the southwest) - Chestnut Ridge
(2 miles [3.2 km] to the north)- Note: The GPS coordinates that we are using for Chestnut Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chestnut Ridge
- Chestnut Ridge is located in Greene County
- Green Acres
(6 miles [9.7 km] to the northwest)- Note: The GPS coordinates that we are using for Green Acres have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Acres
- Green Acres is located in Greene County
- Greystone
(Less than 2 miles to the southwest) - Heritage Hills
(6 miles [9.7 km] to the northwest)- Note: The GPS coordinates that we are using for Heritage Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heritage Hills
- Heritage Hills is located in Greene County
- Horse Creek
(3 miles [4.8 km] to the north)- Note: The GPS coordinates that we are using for Horse Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horse Creek
- Horse Creek is located in Greene County
- Estimated population in 2014: 284 people
- Liberty
(3 miles [4.8 km] to the northeast) - Painter Spring
(4 miles [6.4 km] to the east)- Note: The GPS coordinates that we are using for Painter Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Painter Spring
- Painter Spring is located in Washington County
- Pleasant Hill
(2 miles [3.2 km] to the northeast)- Note: The GPS coordinates that we are using for Pleasant Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Hill
- Pleasant Hill is located in Greene County
- Pleasant View
(5 miles [8 km] to the northwest)- Note: The GPS coordinates that we are using for Pleasant View have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant View
- Pleasant View is located in Greene County
- Estimated population in 2014: 4,251 people
- Twin Oaks
(5 miles [8 km] to the northwest)
How Far From Hampton Mill to ...
We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Hampton Mill to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance<2> beginning in Hampton Mill and extending to:
- Greeneville, which is the Seat of Greene County, lies just to the West Northwest.
- Nashville, which is the State Capital of Tennessee, lies 228 miles [366.9 km]<2> to the west (W). If you could drive a straight line from Hampton Mill to Nashville, with an average speed<3>of 63 miles [101.4 km] per hour, it would take nearly four hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 13 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take 9 days.
- The White House (Washington, DC) is 364 miles [585.8 km] to the east northeast (ENE). Driving would take 6 hours, a buggy would take 15 days and walking would take 21 days.
- The shortest distance<4> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,258 miles [10,071.3 km] and it lies to the northeast (NE).<5>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,966 miles [11,210.7 km] and it lies to the northeast (NE).<6>
- The distance to Saint Peter's Basilica (The Vatican) is 4,842 miles [7,792.4 km] and it lies to the northeast (NE).<7>
Off-the-Road Links ...
Unfortunately, we don't know of a website for Hampton Mill. If you can help, please contact us through our Feedback Page.
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Hampton Mill) to Point B.Our distance measurements begin at a specific point in Hampton Mill. The point we use is located at these GPS coordinates - Latitude: 36.1129, Longitude: -82.6838 In this case, the coordinates for Hampton Mill have been provided by the Geographic Names Information System (GNIS). |
| <3> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <4> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Hampton Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East. |
| <5> | The calculated bearing (or angle) to Jerusalem is 311.306 degrees. |
| <6> | The calculated bearing (or angle) to Mecca is 306.924 degrees. |
| <7> | The calculated bearing (or angle) to the Vatican is 307.983 degrees. |