Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Halls Mill in the Atlas, the following communities of the 1890's would have been found near the current location of Halls Mill. The following communities are listed based on their distance, with the one closest to Halls Mill listed first.
- Poplins Crossroads
(Less than 2 miles to the north)
- Poplins Crossroads is located in Bedford County
- Jump to our Gazetteer entry for Poplins Crossroads
- Fall Creek
(2 miles [3.2 km] to the east)
- Fall Creek is located in Bedford County
- Jump to our Gazetteer entry for Fall Creek
- Unionville
(4 miles [6.4 km] to the north)
- Wheel
(5 miles [8 km] to the southwest)
- Wheel is located in Bedford County
- Jump to our Gazetteer entry for Wheel
- Palmetto
(6 miles [9.7 km] to the southwest)
- Palmetto is located in Bedford County
- Jump to our Gazetteer entry for Palmetto
- Estimated population in 2014: 661 people
- Bedford
(6 miles [9.7 km] to the south)
- Bedford is located in Bedford County
- Jump to our Gazetteer entry for Bedford
- Longview
(6 miles [9.7 km] to the northeast)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Rich Creek
(6 miles [9.7 km] to the west)
- Rich Creek is located in Marshall County
- Jump to our Gazetteer entry for Rich Creek
- Vannatta
(7 miles [11.3 km] to the northeast)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Chapel Hill
(7 miles [11.3 km] to the northwest)
- Farmington
(8 miles [12.9 km] to the southwest)
- Farmington is located in Marshall County
- Jump to our Gazetteer entry for Farmington
- Shelbyville
(8 miles [12.9 km] to the southeast)
- Rover
(8 miles [12.9 km] to the north)
- Rover is located in Bedford County
- Jump to our Gazetteer entry for Rover
- Pleasant Grove
(9 miles [14.5 km] to the south)
- Pleasant Grove is located in Bedford County
- Jump to our Gazetteer entry for Pleasant Grove
- Beasley
(9 miles [14.5 km] to the northwest)
- Beasley is located in Marshall County
- Jump to our Gazetteer entry for Beasley
- Midland
(9 miles [14.5 km] to the northeast)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Caney Spring
(10 miles [16.1 km] to the west)
- Caney Spring is located in Marshall County
- Jump to our Gazetteer entry for Caney Spring
- Verona
(10 miles [16.1 km] to the west)
- Verona is located in Marshall County
- Jump to our Gazetteer entry for Verona
- Belfast
(11 miles [17.7 km] to the southwest)
- Belfast is located in Marshall County
- Jump to our Gazetteer entry for Belfast
- Branchville
(11 miles [17.7 km] to the south)
- Branchville is located in Bedford County
- Jump to our Gazetteer entry for Branchville
- Holts Corner
(11 miles [17.7 km] to the northwest)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Thick
(11 miles [17.7 km] to the northwest)
- Thick is located in Marshall County
- Jump to our Gazetteer entry for Thick
- Lillard Mill
(11 miles [17.7 km] to the west)
- Lillard Mill is located in Marshall County
- Jump to our Gazetteer entry for Lillard Mill
- Fosterville
(12 miles [19.3 km] to the northeast)
- Fosterville is located in Rutherford County
- Jump to our Gazetteer entry for Fosterville
- Link
(12 miles [19.3 km] to the north)
- Link is located in Rutherford County
- Jump to our Gazetteer entry for Link
- Versailles
(12 miles [19.3 km] to the north)
- Versailles is located in Rutherford County
- Jump to our Gazetteer entry for Versailles
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Halls Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |