RoadsideThoughts
A Gazetteer for the United States and Canada
Community
Index
State
Index
Province
Index
County
Index
State
Quarters
 
Sitemap
     
 

Fairview, Tennessee
(Cumberland County)

Community
Profile
Nearby Census Genealogy
Helper
Cemeteries Tidbits &
Trivia
Local
Newspapers
TripAdvisor
Links
Interactive
Map
Wish
List
Other TN
Communities

1890 Communities Near Fairview ...

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during on-going research.

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during on-going research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Fairview in the Atlas, the following communities of the 1890's would have been found near the current location of Fairview.

Balta   (Rhea County)       [Map]  
 - Located 15 miles [24.1 km]<2> to the South (S) from Fairview
 - Balta had railroad service and no post office
 
Big Lick   (Cumberland County)       [Map]  
 - Located 13 miles [20.9 km] to the South Southwest (SSW) from Fairview
 - 1895 population of 48 people
 - Big Lick had a post office and no railroad service
 
Burke   (Cumberland County)       [Map]  
 - Located 15 miles [24.1 km] to the South Southwest (SSW) from Fairview
 - Burke had a post office and no railroad service
 
Clarkrange   (Fentress County)       [Map]  
 - Located 14 miles [22.5 km] to the North Northwest (NNW) from Fairview
 - Clarkrange had a post office and no railroad service
 
Crab Orchard   (Cumberland County)       [Map]  
 - Located 6 miles [9.7 km] to the South Southeast (SSE) from Fairview
 - Crab Orchard had a post office and no railroad service
 
Creston   (Cumberland County)       [Map]  
 - Located 8 miles [12.9 km] to the West (W) from Fairview
 - Creston had a post office and no railroad service
 
Crossville   (Cumberland County)       [Map]  
 - Located 6 miles [9.7 km] to the West Southwest (WSW) from Fairview
 - 1895 population of 266 people (with 11,554 people in 2018)
 - Crossville had a post office and no railroad service
 
Erasmus   (Cumberland County)       [Map]  
 - Located 16 miles [25.7 km] to the West Southwest (WSW) from Fairview
 - Erasmus had a post office and no railroad service
 
Frankfort   (Morgan County)       [Map]  
 - Located 10 miles [16.1 km] to the Northeast (NE) from Fairview
 - Frankfort had a post office and no railroad service
 
Genesis   (Cumberland County)       [Map]  
 - Located 7 miles [11.3 km] to the North (N) from Fairview
 - 1895 population of 22 people
 - Genesis had a post office and no railroad service
 
Glen Alice   (Roane County)       [Map]  
 - Located 16 miles [25.7 km] to the Southeast (SE) from Fairview
 - Glen Alice had a post office and railroad service
 
Grassy Cove   (Cumberland County)       [Map]  
 - Located 10 miles [16.1 km] to the South (S) from Fairview
 - Grassy Cove had a post office and no railroad service
 
Halfway   (Cumberland County)       [Map]  
 - Located 8 miles [12.9 km] to the North Northeast (NNE) from Fairview
 - Halfway had a post office and no railroad service
 
Hebbertsburg   (Cumberland County)       [Map]  
 - Located 7 miles [11.3 km] to the East Northeast (ENE) from Fairview
 - 1895 population of 46 people
 - Hebbertsburg had a post office and no railroad service
 
Howard Springs   (Cumberland County)       [Map]  
 - Located 9 miles [14.5 km] to the West Southwest (WSW) from Fairview
 - Howard Springs had a post office and no railroad service
 
Islandford   (Morgan County) - Historic       [Map]  
 - While Islandford was mentioned in the 1895 Atlas, it no longer exists
 - Located 14 miles [22.5 km] to the Northeast (NE) from Fairview
 - Islandford had a post office and no railroad service
 
Jewett   (Cumberland County)       [Map]  
 - Located 15 miles [24.1 km] to the South (S) from Fairview
 - Jewett had a post office and railroad service
 
Lantana   (Cumberland County)       [Map]  
 - Located 12 miles [19.3 km] to the Southwest (SW) from Fairview
 - Lantana had a post office and no railroad service
 
Lavender   (Morgan County)       [Map]  
 - Located 15 miles [24.1 km] to the North Northeast (NNE) from Fairview
 - Lavender had a post office and no railroad service
 
Music   (Cumberland County) - Historic       [Map]  
 - While Music was mentioned in the 1895 Atlas, it no longer exists
 - Located 16 miles [25.7 km] to the South Southwest (SSW) from Fairview
 - Music had a post office and no railroad service
 
Nemo   (Morgan County)       [Map]  
 - Located 16 miles [25.7 km] to the East Northeast (ENE) from Fairview
 - Nemo had a post office and railroad service
 
Pleasant Hill   (Cumberland County)       [Map]  
 - Located 15 miles [24.1 km] to the West (W) from Fairview
 - 1895 population of 25 people (with 568 people in 2018)
 - Pleasant Hill had a post office and no railroad service
 
Pomona   (Cumberland County)       [Map]  
 - Located 10 miles [16.1 km] to the West Southwest (WSW) from Fairview
 - Pomona had a post office and no railroad service
 
Rockwood   (Roane County)       [Map]  
 - Located 16 miles [25.7 km] to the East Southeast (ESE) from Fairview
 - 1895 population of 2,429 people (with 5,452 people in 2018)
 - Rockwood had a post office and railroad service
 
Roslin   (Fentress County)       [Map]  
 - Located 15 miles [24.1 km] to the North (N) from Fairview
 - Roslin had a post office and no railroad service
 
Woody   (Cumberland County)       [Map]  
 - Located 9 miles [14.5 km] to the Northwest (NW) from Fairview
 - Woody had a post office and no railroad service
 
Wyatt   (Cumberland County) - Historic       [Map]  
 - While Wyatt was mentioned in the 1895 Atlas, it no longer exists
 - Located 14 miles [22.5 km] to the Southwest (SW) from Fairview
 - Wyatt had a post office and no railroad service

Other Roadside Stops ...



Find a Community located in Tennessee

About Cumberland County

About Tennessee

Off-the-Road Links ...

The official website for Cumberland County: www.brockhill.org/

The official website for State of Tennessee: https://www.tn.gov/



Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fairview, please let us know so that we can improve our accuracy.

- Return to Citation

<2>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance that stretches from Fairview. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Fairview) to Point B.

Our distance measurements begin at a specific point in Fairview. The point that we are using is located at these GPS coordinates - Latitude: 35.9940, Longitude: -84.9272     [Map].   In this case, the coordinates for Fairview have been provided by the Geographic Names Information System (GNIS).

- Return to Citation



 
 
 
 
 
 

Home
Page
Sitemap Privacy
Statement
Terms
of Use
Feedback

 
 

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

Copyright 2019
All Rights Reserved
This page was last modified: 09 Sep 2019
By John Hall