|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Whitesell - Wilhoite Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Whitesell - Wilhoite Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Whitesell - Wilhoite Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Shelbyville
(2 miles [3.2 km] to the east)
- Anchor Mill ‑ Historic
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Whitaker
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Unionville
(10 miles [16.1 km] to the northwest)
- Haley
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Wartrace
(10 miles [16.1 km] to the east)
- Longview
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Raus
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Raus
- Raus is located in Bedford County
- Bell Buckle
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <2>
- Oak Hill
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Willow Grove
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Willow Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willow Grove
- Willow Grove is located in Bedford County
- Cortner
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
- Midland
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Talley
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talley
- Talley is located in Marshall County
- Petersburg
(13 miles [20.9 km] to the southwest)
- Countyline
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Countyline have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Countyline
- Countyline is located in Moore County
- Belleville
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Belleville
- Belleville is located in Lincoln County
- Cascade Hollow
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Cascade Hollow
- Cascade Hollow is located in Bedford County
- Normandy
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Bedford County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Normandy <2>
- Chapel Hill
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Marshall County
- Population from the 2020 Census: 1,571 people
- Jump to TripAdvisor's Tourism page for Chapel Hill <2>
- Lynchburg
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynchburg
- Lynchburg is located in Moore County
- Jump to TripAdvisor's Tourism page for Lynchburg <2>
- Verona
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Caney Spring
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Lewisburg
(16 miles [25.7 km] to the west)
- Cochran
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Cochran have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cochran
- Cochran is located in Marshall County
- Homaway Village
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homaway Village
- Homaway Village is located in Coffee County
- Beechgrove
(17 miles [27.4 km] to the northeast)
- Plainview
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Holts Corner
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Concord
(17 miles [27.4 km] to the north)
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Whitesell - Wilhoite Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.4840, Longitude: -86.5061 In this case, the coordinates for the Whitesell - Wilhoite Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|