|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Terry Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Terry Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Terry Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Anchor Mill ‑ Historic
(2 miles [3.2 km] to the southwest)
- Anchor Mill is located in Bedford County
- Jump to our Gazetteer entry for Anchor Mill
- Vannatta
(3 miles [4.8 km] to the northeast)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Longview
(4 miles [6.4 km] to the north)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Unionville
(5 miles [8 km] to the northwest)
- Shelbyville
(6 miles [9.7 km] to the southeast)
- Midland
(6 miles [9.7 km] to the north)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Bell Buckle
(8 miles [12.9 km] to the east)
- Whitaker
(10 miles [16.1 km] to the southwest)
- Whitaker is located in Bedford County
- Jump to our Gazetteer entry for Whitaker
- Wartrace
(10 miles [16.1 km] to the east)
- Chapel Hill
(10 miles [16.1 km] to the west)
- Concord
(11 miles [17.7 km] to the north)
- Haley
(12 miles [19.3 km] to the southeast)
- Haley is located in Bedford County
- Jump to our Gazetteer entry for Haley
- Plainview
(12 miles [19.3 km] to the northeast)
- Plainview is located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Holts Corner
(12 miles [19.3 km] to the northwest)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Rucker
(13 miles [20.9 km] to the northeast)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Eagleville
(13 miles [20.9 km] to the northwest)
- Anes
(13 miles [20.9 km] to the west)
- Anes is located in Marshall County
- Jump to our Gazetteer entry for Anes
- Verona
(14 miles [22.5 km] to the west)
- Verona is located in Marshall County
- Jump to our Gazetteer entry for Verona
- Oak Hill
(14 miles [22.5 km] to the southwest)
- Oak Hill is located in Marshall County
- Jump to our Gazetteer entry for Oak Hill
- Caney Spring
(14 miles [22.5 km] to the west)
- Caney Spring is located in Marshall County
- Jump to our Gazetteer entry for Caney Spring
- Belfast
(15 miles [24.1 km] to the southwest)
- Belfast is located in Marshall County
- Jump to our Gazetteer entry for Belfast
- Cortner
(15 miles [24.1 km] to the southeast)
- Cortner is located in Bedford County
- Jump to our Gazetteer entry for Cortner
- Beechgrove
(15 miles [24.1 km] to the east)
- Allisona
(15 miles [24.1 km] to the northwest)
- Allisona is located in Rutherford County
- Jump to our Gazetteer entry for Allisona
- Raus
(16 miles [25.7 km] to the southeast)
- Raus is located in Bedford County
- Jump to our Gazetteer entry for Raus
- Willow Grove
(16 miles [25.7 km] to the southeast)
- Willow Grove is located in Bedford County
- Jump to our Gazetteer entry for Willow Grove
- Normandy
(16 miles [25.7 km] to the southeast)
- Burns Place
(16 miles [25.7 km] to the northeast)
- Burns Place is located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Terry Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|