|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Steele Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Steele Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Steele Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Vannatta
(Less than 2 miles to the north)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Anchor Mill ‑ Historic
(4 miles [6.4 km] to the southwest)
- Anchor Mill is located in Bedford County
- Jump to our Gazetteer entry for Anchor Mill
- Longview
(4 miles [6.4 km] to the northwest)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Midland
(5 miles [8 km] to the north)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Unionville
(6 miles [9.7 km] to the west)
- Shelbyville
(7 miles [11.3 km] to the south)
- Bell Buckle
(7 miles [11.3 km] to the east)
- Wartrace
(9 miles [14.5 km] to the southeast)
- Plainview
(10 miles [16.1 km] to the northeast)
- Plainview is located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Concord
(11 miles [17.7 km] to the north)
- Chapel Hill
(11 miles [17.7 km] to the west)
- Whitaker
(12 miles [19.3 km] to the southwest)
- Whitaker is located in Bedford County
- Jump to our Gazetteer entry for Whitaker
- Haley
(12 miles [19.3 km] to the southeast)
- Haley is located in Bedford County
- Jump to our Gazetteer entry for Haley
- Rucker
(12 miles [19.3 km] to the northeast)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Eagleville
(13 miles [20.9 km] to the northwest)
- Holts Corner
(13 miles [20.9 km] to the northwest)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Cortner
(14 miles [22.5 km] to the southeast)
- Cortner is located in Bedford County
- Jump to our Gazetteer entry for Cortner
- Beechgrove
(14 miles [22.5 km] to the east)
- Burns Place
(14 miles [22.5 km] to the northeast)
- Burns Place is located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
- Oak Hill
(15 miles [24.1 km] to the southwest)
- Oak Hill is located in Marshall County
- Jump to our Gazetteer entry for Oak Hill
- Willow Grove
(15 miles [24.1 km] to the southeast)
- Willow Grove is located in Bedford County
- Jump to our Gazetteer entry for Willow Grove
- Normandy
(15 miles [24.1 km] to the southeast)
- Caney Spring
(15 miles [24.1 km] to the west)
- Caney Spring is located in Marshall County
- Jump to our Gazetteer entry for Caney Spring
- Anes
(15 miles [24.1 km] to the west)
- Anes is located in Marshall County
- Jump to our Gazetteer entry for Anes
- Verona
(16 miles [25.7 km] to the west)
- Verona is located in Marshall County
- Jump to our Gazetteer entry for Verona
- Belfast
(16 miles [25.7 km] to the southwest)
- Belfast is located in Marshall County
- Jump to our Gazetteer entry for Belfast
- Raus
(16 miles [25.7 km] to the southeast)
- Raus is located in Bedford County
- Jump to our Gazetteer entry for Raus
- Cascade Hollow
(16 miles [25.7 km] to the southeast)
- Cascade Hollow is located in Bedford County
- Jump to our Gazetteer entry for Cascade Hollow
- Gossburg
(16 miles [25.7 km] to the east)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Allisona
(16 miles [25.7 km] to the northwest)
- Allisona is located in Rutherford County
- Jump to our Gazetteer entry for Allisona
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Steele Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|