RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Bedford County >> Orr Cemetery >> Nearby CommunitiesIndex...

Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Orr Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Orr Cemetery.

List of Neighboring Communities ...

    Below are the communities that are within 30 miles [48.3 km]<1> of the Orr Cemetery. We've listed the following communities based on their distance, with the closest first:

  • Anchor Mill ‑ Historic
    (2 miles [3.2 km] to the southwest)
    • Anchor Mill is located in Bedford County
    • Jump to our Gazetteer entry for Anchor Mill
  • Vannatta
    (3 miles [4.8 km] to the north)
    • Vannatta is located in Bedford County
    • Jump to our Gazetteer entry for Vannatta
    • Estimated population in 2014: 398 people
  • Longview
    (5 miles [8 km] to the north)
    • Longview is located in Bedford County
    • Jump to our Gazetteer entry for Longview
  • Shelbyville
    (5 miles [8 km] to the southeast)
  • Unionville
    (6 miles [9.7 km] to the northwest)
  • Midland
    (7 miles [11.3 km] to the north)
    • Midland is located in Rutherford County
    • Jump to our Gazetteer entry for Midland
  • Bell Buckle
    (8 miles [12.9 km] to the east)
  • Wartrace
    (9 miles [14.5 km] to the east)
  • Whitaker
    (10 miles [16.1 km] to the southwest)
    • Whitaker is located in Bedford County
    • Jump to our Gazetteer entry for Whitaker
  • Haley
    (11 miles [17.7 km] to the southeast)
    • Haley is located in Bedford County
    • Jump to our Gazetteer entry for Haley
  • Chapel Hill
    (11 miles [17.7 km] to the west)
  • Concord
    (12 miles [19.3 km] to the north)
  • Plainview
    (12 miles [19.3 km] to the northeast)
    • Plainview is located in Rutherford County
    • Jump to our Gazetteer entry for Plainview
  • Cortner
    (13 miles [20.9 km] to the southeast)
    • Cortner is located in Bedford County
    • Jump to our Gazetteer entry for Cortner
  • Oak Hill
    (14 miles [22.5 km] to the southwest)
    • Oak Hill is located in Marshall County
    • Jump to our Gazetteer entry for Oak Hill
  • Belfast
    (14 miles [22.5 km] to the southwest)
    • Belfast is located in Marshall County
    • Jump to our Gazetteer entry for Belfast
  • Raus
    (14 miles [22.5 km] to the southeast)
    • Raus is located in Bedford County
    • Jump to our Gazetteer entry for Raus
  • Willow Grove
    (14 miles [22.5 km] to the southeast)
    • Willow Grove is located in Bedford County
    • Jump to our Gazetteer entry for Willow Grove
  • Rucker
    (14 miles [22.5 km] to the northeast)
    • Rucker is located in Rutherford County
    • Jump to our Gazetteer entry for Rucker
  • Holts Corner
    (14 miles [22.5 km] to the northwest)
    • Holts Corner is located in Marshall County
    • Jump to our Gazetteer entry for Holts Corner
  • Anes
    (14 miles [22.5 km] to the west)
    • Anes is located in Marshall County
    • Jump to our Gazetteer entry for Anes
  • Normandy
    (15 miles [24.1 km] to the southeast)
  • Beechgrove
    (15 miles [24.1 km] to the east)
  • Eagleville
    (15 miles [24.1 km] to the northwest)
  • Caney Spring
    (15 miles [24.1 km] to the west)
    • Caney Spring is located in Marshall County
    • Jump to our Gazetteer entry for Caney Spring
  • Verona
    (15 miles [24.1 km] to the west)
    • Verona is located in Marshall County
    • Jump to our Gazetteer entry for Verona

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Orr Cemetery) to Point B. In other words: 'As the crow flies'.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.