RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Polk County >> Old Fairview Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Old Fairview Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Old Fairview Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Old Fairview Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Archville
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for Archville
    • Archville is located in Polk County
  • Ducktown
    (8 miles [12.9 km] to the southeast)
  • Chanceytown
    (8 miles [12.9 km] to the southeast)
    • Jump to our Gazetteer entry for Chanceytown
    • Chanceytown is located in Polk County
  • Benton
    (9 miles [14.5 km] to the northwest)
  • Fry
    (10 miles [16.1 km] to the southeast)
    • Jump to our Gazetteer entry for Fry
    • Fry is located in Fannin County (GA)
  • Copperhill
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Copperhill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Copperhill
    • Copperhill is located in Polk County
    • Population from the 2020 Census: 316 people
    • Jump to TripAdvisor's Tourism page for Copperhill <2>
  • Delano
    (11 miles [17.7 km] to the north)
  • Ball Play
    (11 miles [17.7 km] to the southwest)
    • Jump to our Gazetteer entry for Ball Play
    • Ball Play is located in Polk County
  • McCaysville
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for McCaysville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McCaysville
    • McCaysville is located in Fannin County (GA)
    • Population from the 2020 Census: 1,217 people
    • Jump to TripAdvisor's Tourism page for McCaysville <2>
  • Ocoee
    (11 miles [17.7 km] to the west)
  • Oldfort
    (12 miles [19.3 km] to the west)
    • Jump to our Gazetteer entry for Oldfort
    • Oldfort is located in Polk County
  • Pierceville
    (12 miles [19.3 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Pierceville. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Pierceville
    • Pierceville is located in Fannin County (GA)
  • Epworth
    (12 miles [19.3 km] to the southeast)
  • Pantertown
    (12 miles [19.3 km] to the southeast)
    • Jump to our Gazetteer entry for Pantertown
    • Pantertown is located in Fannin County (GA)
    • Population from the 2010 Census: 9,749 people
  • Burger Town
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Burger Town have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Burger Town
    • Burger Town is located in Cherokee County (NC)
  • Liberty
    (12 miles [19.3 km] to the east)
    • Jump to our Gazetteer entry for Liberty
    • Liberty is located in Cherokee County (NC)
  • Chestuee
    (13 miles [20.9 km] to the northwest)
    • Jump to our Gazetteer entry for Chestuee
    • Chestuee is located in Polk County
  • Tennga
    (14 miles [22.5 km] to the southwest)
    • Jump to our Gazetteer entry for Tennga
    • Tennga is located in Murray County (GA)
    • Estimated population in 2019: 2,123 people
    • Jump to TripAdvisor's Tourism page for Tennga <2>
  • Epperson
    (14 miles [22.5 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Epperson. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Epperson
    • Epperson is located in Monroe County
  • Luskville
    (14 miles [22.5 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Luskville. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Luskville
    • Luskville is located in McMinn County
  • Chestnut Gap
    (15 miles [24.1 km] to the southeast)
    • Jump to our Gazetteer entry for Chestnut Gap
    • Chestnut Gap is located in Fannin County (GA)
  • Postell
    (15 miles [24.1 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Postell. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Postell
    • Postell is located in Cherokee County (NC)
  • Claxton
    (15 miles [24.1 km] to the northwest)
    • Jump to our Gazetteer entry for Claxton
    • Claxton is located in McMinn County
  • Pleasant Hill
    (15 miles [24.1 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Pleasant Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Pleasant Hill
    • Pleasant Hill is located in Cherokee County (NC)
  • Cisco
    (16 miles [25.7 km] to the southwest)
  • Etowah
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Etowah have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Etowah
    • Etowah is located in McMinn County
    • Population from the 2020 Census: 3,527 people
    • Jump to TripAdvisor's Tourism page for Etowah <2>
  • Coker Creek
    (16 miles [25.7 km] to the northeast)
    • Jump to our Gazetteer entry for Coker Creek
    • Coker Creek is located in Monroe County
  • Rural Vale
    (16 miles [25.7 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Rural Vale. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Rural Vale
    • Rural Vale is located in Monroe County
  • Goodsprings
    (16 miles [25.7 km] to the north)
    • Jump to our Gazetteer entry for Goodsprings
    • Goodsprings is located in McMinn County

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Old Fairview Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.1026, Longitude: -84.5169       In this case, the coordinates for the Old Fairview Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025