|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Molder Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Molder Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Molder Cemetery. We've listed the following communities based on their distance, with the closest first.
- Anchor Mill ‑ Historic
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Whitaker
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Shelbyville
(7 miles [11.3 km] to the east)
- Unionville
(7 miles [11.3 km] to the north)
- Oak Hill
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Belfast
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Belfast. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Belfast
- Belfast is located in Marshall County
- Vannatta
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Longview
(9 miles [14.5 km] to the north)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Chapel Hill
(10 miles [16.1 km] to the northwest)
- Verona
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Verona. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Talley
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Talley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Talley
- Talley is located in Marshall County
- Lewisburg
(12 miles [19.3 km] to the west)
- Midland
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Caney Spring
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Caney Spring. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Cochran
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Cochran. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cochran
- Cochran is located in Marshall County
- Petersburg
(13 miles [20.9 km] to the south)
- Berlin
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- Holts Corner
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Wartrace
(14 miles [22.5 km] to the east)
- Bell Buckle
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <3>
- South Berlin
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for South Berlin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for South Berlin
- South Berlin is located in Marshall County
- Yell
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Yell. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Yell
- Yell is located in Marshall County
- Haley
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Eagleville
(16 miles [25.7 km] to the north)
- Belleville
(16 miles [25.7 km] to the south)
- Jump to our Gazetteer entry for Belleville
- Belleville is located in Lincoln County
- Raus
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Raus
- Raus is located in Bedford County
- Concord
(16 miles [25.7 km] to the north)
- Leftwich
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Leftwich. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Leftwich
- Leftwich is located in Maury County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Molder Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.5090, Longitude: -86.5819 In this case, the coordinates for the Molder Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|