|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Liberty Hill Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Liberty Hill Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Liberty Hill Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Solitude ‑ Historic
(Less than 2 miles to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Solitude
- Solitude is located in Hawkins County
- Mount Carmel
(Less than 2 miles to the west)
- Green Village
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Green Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Village
- Green Village is located in Hawkins County
- Block City
(Less than 2 miles to the west)
- Note: The GPS coordinates that we are using for Block City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Block City
- Block City is located in Hawkins County
- Rotherwood
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Rotherwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rotherwood
- Rotherwood is located in Hawkins County
- Church Hill
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Church Hill
- Church Hill is located in Hawkins County
- Population from the 2020 Census: 6,643 people
- Jump to TripAdvisor's Tourism page for Church Hill <3>
- Beartown
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for Beartown
- Beartown is located in Sullivan County
- Frisco
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Frisco have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frisco
- Frisco is located in Hawkins County
- Kingsport
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Kingsport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsport
- Kingsport is located in Sullivan County
- Population from the 2020 Census: 54,112 people
- Jump to TripAdvisor's Tourism page for Kingsport <3>
- Cherokee Village
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Cherokee Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherokee Village
- Cherokee Village is located in Sullivan County
- Morrison City
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Morrison City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morrison City
- Morrison City is located in Sullivan County
- Borden Village
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Borden Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Borden Village
- Borden Village is located in Sullivan County
- Blossom
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Blossom have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blossom
- Blossom is located in Hawkins County
- Beechwood Village
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Beechwood Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beechwood Village
- Beechwood Village is located in Sullivan County
- Greenland
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Greenland
- Greenland is located in Hawkins County
- Fall Branch
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Fall Branch have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall Branch
- Fall Branch is located in Washington County
- Population from the 2010 Census: 1,291 people
- Jump to TripAdvisor's Tourism page for Fall Branch <3>
- Kendrick Creek ‑ Historic
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Kendrick Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kendrick Creek
- Kendrick Creek is located in Sullivan County
- Colonial Heights
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Colonial Heights have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Heights
- Colonial Heights is located in Sullivan County
- Population from the 2010 Census: 6,934 people
- Jump to TripAdvisor's Tourism page for Colonial Heights <3>
- Bloomingdale
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Bloomingdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomingdale
- Bloomingdale is located in Sullivan County
- Population from the 2010 Census: 9,888 people
- Orebank
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Orebank
- Orebank is located in Sullivan County
- Harmony
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Washington County
- Wheelocktown ‑ Historic
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Wheelocktown
- Wheelocktown is located in Washington County
- Surgoinsville
(12 miles [19.3 km] to the southwest)
- Jearoldstown
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Jearoldstown
- Jearoldstown is located in Greene County
- Rock City
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Rock City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock City
- Rock City is located in Sullivan County
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Liberty Hill Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.5448, Longitude: -82.6532 In this case, the coordinates for the Liberty Hill Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|