RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Bedford County >> Landers Cemetery >> Nearby CommunitiesIndex...

Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Landers Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Landers Cemetery.

List of Neighboring Communities ...

    Below are the communities that are within 30 miles [48.3 km]<1> of the Landers Cemetery. We've listed the following communities based on their distance, with the closest first:

  • Anchor Mill ‑ Historic
    (Less than 2 miles to the northeast)
    • Anchor Mill is located in Bedford County
    • Jump to our Gazetteer entry for Anchor Mill
  • Shelbyville
    (5 miles [8 km] to the southeast)
  • Unionville
    (6 miles [9.7 km] to the northwest)
  • Vannatta
    (6 miles [9.7 km] to the northeast)
    • Vannatta is located in Bedford County
    • Jump to our Gazetteer entry for Vannatta
    • Estimated population in 2014: 398 people
  • Whitaker
    (7 miles [11.3 km] to the southwest)
    • Whitaker is located in Bedford County
    • Jump to our Gazetteer entry for Whitaker
  • Longview
    (7 miles [11.3 km] to the north)
    • Longview is located in Bedford County
    • Jump to our Gazetteer entry for Longview
  • Midland
    (10 miles [16.1 km] to the north)
    • Midland is located in Rutherford County
    • Jump to our Gazetteer entry for Midland
  • Chapel Hill
    (10 miles [16.1 km] to the northwest)
  • Oak Hill
    (11 miles [17.7 km] to the southwest)
    • Oak Hill is located in Marshall County
    • Jump to our Gazetteer entry for Oak Hill
  • Wartrace
    (11 miles [17.7 km] to the east)
  • Bell Buckle
    (11 miles [17.7 km] to the east)
  • Belfast
    (12 miles [19.3 km] to the southwest)
    • Belfast is located in Marshall County
    • Jump to our Gazetteer entry for Belfast
  • Anes
    (12 miles [19.3 km] to the west)
    • Anes is located in Marshall County
    • Jump to our Gazetteer entry for Anes
  • Verona
    (12 miles [19.3 km] to the west)
    • Verona is located in Marshall County
    • Jump to our Gazetteer entry for Verona
  • Haley
    (13 miles [20.9 km] to the east)
    • Haley is located in Bedford County
    • Jump to our Gazetteer entry for Haley
  • Caney Spring
    (13 miles [20.9 km] to the northwest)
    • Caney Spring is located in Marshall County
    • Jump to our Gazetteer entry for Caney Spring
  • Talley
    (14 miles [22.5 km] to the southwest)
    • Talley is located in Marshall County
    • Jump to our Gazetteer entry for Talley
  • Holts Corner
    (14 miles [22.5 km] to the northwest)
    • Holts Corner is located in Marshall County
    • Jump to our Gazetteer entry for Holts Corner
  • Concord
    (14 miles [22.5 km] to the north)
  • Lewisburg
    (15 miles [24.1 km] to the southwest)
  • Petersburg
    (15 miles [24.1 km] to the south)
  • Raus
    (15 miles [24.1 km] to the southeast)
    • Raus is located in Bedford County
    • Jump to our Gazetteer entry for Raus
  • Eagleville
    (15 miles [24.1 km] to the northwest)
  • Willow Grove
    (15 miles [24.1 km] to the southeast)
    • Willow Grove is located in Bedford County
    • Jump to our Gazetteer entry for Willow Grove
  • Cortner
    (15 miles [24.1 km] to the east)
    • Cortner is located in Bedford County
    • Jump to our Gazetteer entry for Cortner
  • Plainview
    (15 miles [24.1 km] to the northeast)
    • Plainview is located in Rutherford County
    • Jump to our Gazetteer entry for Plainview

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Landers Cemetery) to Point B. In other words: 'As the crow flies'.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.