|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Holland Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Holland Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Holland Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Shelbyville
(Less than 2 miles to the west)
- Wartrace
(5 miles [8 km] to the northeast)
- Haley
(6 miles [9.7 km] to the east)
- Haley is located in Bedford County
- Jump to our Gazetteer entry for Haley
- Anchor Mill ‑ Historic
(6 miles [9.7 km] to the northwest)
- Anchor Mill is located in Bedford County
- Jump to our Gazetteer entry for Anchor Mill
- Bell Buckle
(7 miles [11.3 km] to the northeast)
- Raus
(8 miles [12.9 km] to the southeast)
- Raus is located in Bedford County
- Jump to our Gazetteer entry for Raus
- Willow Grove
(8 miles [12.9 km] to the southeast)
- Willow Grove is located in Bedford County
- Jump to our Gazetteer entry for Willow Grove
- Cortner
(8 miles [12.9 km] to the east)
- Cortner is located in Bedford County
- Jump to our Gazetteer entry for Cortner
- Vannatta
(9 miles [14.5 km] to the north)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Normandy
(9 miles [14.5 km] to the east)
- Cascade Hollow
(10 miles [16.1 km] to the east)
- Cascade Hollow is located in Bedford County
- Jump to our Gazetteer entry for Cascade Hollow
- Whitaker
(11 miles [17.7 km] to the west)
- Whitaker is located in Bedford County
- Jump to our Gazetteer entry for Whitaker
- Longview
(11 miles [17.7 km] to the northwest)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Midland
(12 miles [19.3 km] to the north)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Countyline
(12 miles [19.3 km] to the south)
- Countyline is located in Moore County
- Jump to our Gazetteer entry for Countyline
- Unionville
(12 miles [19.3 km] to the northwest)
- Homaway Village
(13 miles [20.9 km] to the southeast)
- Homaway Village is located in Coffee County
- Jump to our Gazetteer entry for Homaway Village
- Beechgrove
(13 miles [20.9 km] to the northeast)
- Lynchburg
(14 miles [22.5 km] to the south)
- Booneville
(15 miles [24.1 km] to the south)
- Booneville is located in Lincoln County
- Jump to our Gazetteer entry for Booneville
- Tullahoma
(15 miles [24.1 km] to the southeast)
- Busy Corner
(15 miles [24.1 km] to the east)
- Busy Corner is located in Coffee County
- Jump to our Gazetteer entry for Busy Corner
- Plainview
(15 miles [24.1 km] to the north)
- Plainview is located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Belfast
(16 miles [25.7 km] to the west)
- Belfast is located in Marshall County
- Jump to our Gazetteer entry for Belfast
- Petersburg
(16 miles [25.7 km] to the southwest)
- Belleville
(16 miles [25.7 km] to the southwest)
- Belleville is located in Lincoln County
- Jump to our Gazetteer entry for Belleville
- Ridgeville
(16 miles [25.7 km] to the southeast)
- Ridgeville is located in Moore County
- Jump to our Gazetteer entry for Ridgeville
- Gossburg
(16 miles [25.7 km] to the northeast)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Oak Hill
(16 miles [25.7 km] to the west)
- Oak Hill is located in Marshall County
- Jump to our Gazetteer entry for Oak Hill
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Holland Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|