|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hillcrest Memorial Gardens.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hillcrest Memorial Gardens.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hillcrest Memorial Gardens. We've listed the following communities based on their distance, with the closest first.
- Shelbyville
(2 miles [3.2 km] to the west)
- Haley
(5 miles [8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Wartrace
(5 miles [8 km] to the northeast)
- Raus
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Raus
- Raus is located in Bedford County
- Willow Grove
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Willow Grove. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Willow Grove
- Willow Grove is located in Bedford County
- Cortner
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
- Anchor Mill ‑ Historic
(7 miles [11.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Normandy
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Bedford County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Normandy <2>
- Bell Buckle
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <2>
- Cascade Hollow
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Cascade Hollow
- Cascade Hollow is located in Bedford County
- Vannatta
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Countyline
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Countyline. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Countyline
- Countyline is located in Moore County
- Homaway Village
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homaway Village
- Homaway Village is located in Coffee County
- Longview
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Whitaker
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Midland
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Lynchburg
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynchburg
- Lynchburg is located in Moore County
- Jump to TripAdvisor's Tourism page for Lynchburg <2>
- Tullahoma
(13 miles [20.9 km] to the southeast)
- Booneville
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Booneville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Booneville
- Booneville is located in Lincoln County
- Busy Corner
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Busy Corner
- Busy Corner is located in Coffee County
- Beechgrove
(14 miles [22.5 km] to the northeast)
- Unionville
(14 miles [22.5 km] to the northwest)
- Ridgeville
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ridgeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ridgeville
- Ridgeville is located in Moore County
- Plainview
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Belfast
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Belfast. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Belfast
- Belfast is located in Marshall County
- Petersburg
(16 miles [25.7 km] to the southwest)
- Belleville
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Belleville
- Belleville is located in Lincoln County
- Gossburg
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gossburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Oak Hill
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hillcrest Memorial Gardens. The point we use is located at these GPS coordinates - Latitude: 35.4804, Longitude: -86.4119 In this case, the coordinates for the Hillcrest Memorial Gardens have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|