|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Finney Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Finney Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Finney Cemetery. We've listed the following communities based on their distance, with the closest first.
- Longview
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Unionville
(2 miles [3.2 km] to the northwest)
- Vannatta
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Anchor Mill ‑ Historic
(4 miles [6.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Midland
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Chapel Hill
(8 miles [12.9 km] to the west)
- Shelbyville
(9 miles [14.5 km] to the southeast)
- Concord
(9 miles [14.5 km] to the north)
- Bell Buckle
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <2>
- Eagleville
(10 miles [16.1 km] to the northwest)
- Holts Corner
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Whitaker
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Caney Spring
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Caney Spring. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Verona
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Verona. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Oak Hill
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Wartrace
(13 miles [20.9 km] to the southeast)
- Plainview
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Rucker
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Allisona
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Allisona. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Allisona
- Allisona is located in Rutherford County
- College Grove
(14 miles [22.5 km] to the northwest)
- Patterson
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Patterson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Rutherford County
- Belfast
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Belfast. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Belfast
- Belfast is located in Marshall County
- Haley
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Burns Place
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Burns Place
- Burns Place is located in Rutherford County
- Berlin
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- Snell ‑ Historic
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snell
- Snell is located in Rutherford County
- Estimated population in 2014: 1,361 people
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Finney Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.6059, Longitude: -86.5475 In this case, the coordinates for the Finney Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|