|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Chase Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Chase Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Chase Cemetery. We've listed the following communities based on their distance, with the closest first.
- Colonial Heights
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Colonial Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Heights
- Colonial Heights is located in Sullivan County
- Population from the 2010 Census: 6,934 people
- Jump to TripAdvisor's Tourism page for Colonial Heights <3>
- Kendrick Creek ‑ Historic
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Kendrick Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kendrick Creek
- Kendrick Creek is located in Sullivan County
- Beechwood Village
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Beechwood Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beechwood Village
- Beechwood Village is located in Sullivan County
- Fordtown
(3 miles [4.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Fordtown. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Fordtown
- Fordtown is located in Sullivan County
- Wahoo ‑ Historic
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Wahoo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wahoo
- Wahoo is located in Sullivan County
- Horace ‑ Historic
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Horace have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horace
- Horace is located in Sullivan County
- Orebank
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for Orebank
- Orebank is located in Sullivan County
- Kingsport
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kingsport. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kingsport
- Kingsport is located in Sullivan County
- Population from the 2020 Census: 54,112 people
- Jump to TripAdvisor's Tourism page for Kingsport <3>
- Borden Village
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Borden Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Borden Village
- Borden Village is located in Sullivan County
- Spurgeon
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for Spurgeon
- Spurgeon is located in Washington County
- Population from the 2010 Census: 3,957 people
- Colby ‑ Historic
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Colby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colby
- Colby is located in Sullivan County
- Gray
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Gray have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gray
- Gray is located in Washington County
- Jump to TripAdvisor's Tourism page for Gray <3>
- Rock City
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Rock City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock City
- Rock City is located in Sullivan County
- Bloomingdale
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Bloomingdale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bloomingdale
- Bloomingdale is located in Sullivan County
- Population from the 2010 Census: 9,888 people
- Cherokee Village
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Cherokee Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherokee Village
- Cherokee Village is located in Sullivan County
- Sac ‑ Historic
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Sac have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sac
- Sac is located in Sullivan County
- Wheelocktown ‑ Historic
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Wheelocktown
- Wheelocktown is located in Washington County
- Oak Grove
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Washington County
- Thom ‑ Historic
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Thom have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thom
- Thom is located in Sullivan County
- Morrison City
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Morrison City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morrison City
- Morrison City is located in Sullivan County
- Beartown
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Beartown
- Beartown is located in Sullivan County
- Rotherwood
(7 miles [11.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Rotherwood. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rotherwood
- Rotherwood is located in Hawkins County
- Harmony
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Harmony. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Washington County
- Fall Branch
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Fall Branch. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Fall Branch
- Fall Branch is located in Washington County
- Population from the 2010 Census: 1,291 people
- Jump to TripAdvisor's Tourism page for Fall Branch <3>
- Flourville
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Flourville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Flourville
- Flourville is located in Washington County
- Lella ‑ Historic
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Lella have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lella
- Lella is located in Sullivan County
- Blountville
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Blountville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blountville
- Blountville is located in Sullivan County
- Population from the 2010 Census: 3,074 people
- Jump to TripAdvisor's Tourism page for Blountville <3>
- Mill Point
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Mill Point
- Mill Point is located in Sullivan County
- Estimated population in 2014: 11,080 people
- Frisco
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Frisco. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Frisco
- Frisco is located in Hawkins County
- Solitude ‑ Historic
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Solitude
- Solitude is located in Hawkins County
- Mount Carmel
(9 miles [14.5 km] to the west)
Off-the-Road Links ...
The official website for Sullivan County: www.sullivancounty.org/ The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Chase Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.5034, Longitude: -82.4957 In this case, the coordinates for the Chase Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|