|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Barton Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Barton Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Barton Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Readyville
(Less than 2 miles to the northwest)
- Burt
(3 miles [4.8 km] to the south)
- Burt is located in Cannon County
- Jump to our Gazetteer entry for Burt
- Woodbury
(4 miles [6.4 km] to the east)
- Bradyville
(5 miles [8 km] to the south)
- Bradyville is located in Cannon County
- Jump to our Gazetteer entry for Bradyville
- Burgen
(5 miles [8 km] to the south)
- Burgen is located in Cannon County
- Jump to our Gazetteer entry for Burgen
- Kittrell
(5 miles [8 km] to the west)
- Kittrell is located in Rutherford County
- Jump to our Gazetteer entry for Kittrell
- Milton
(8 miles [12.9 km] to the north)
- Milton is located in Rutherford County
- Jump to our Gazetteer entry for Milton
- Manus Town ‑ Historic
(8 miles [12.9 km] to the east)
- Manus Town is located in Cannon County
- Jump to our Gazetteer entry for Manus Town
- Bluewing
(9 miles [14.5 km] to the east)
- Bluewing is located in Cannon County
- Jump to our Gazetteer entry for Bluewing
- Thomas Town ‑ Historic
(9 miles [14.5 km] to the east)
- Thomas Town is located in Cannon County
- Jump to our Gazetteer entry for Thomas Town
- Dillton
(9 miles [14.5 km] to the west)
- Dillton is located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Gossburg
(10 miles [16.1 km] to the south)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Auburntown
(10 miles [16.1 km] to the north)
- Auburntown is located in Cannon County
- Jump to our Gazetteer entry for Auburntown
- Population from the 2020 Census: 266 people
- Burns Place
(11 miles [17.7 km] to the west)
- Burns Place is located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
- Woods
(11 miles [17.7 km] to the east)
- Woods is located in Cannon County
- Jump to our Gazetteer entry for Woods
- Compton
(11 miles [17.7 km] to the northwest)
- Compton is located in Rutherford County
- Jump to our Gazetteer entry for Compton
- Gassaway
(12 miles [19.3 km] to the northeast)
- Gassaway is located in Cannon County
- Jump to our Gazetteer entry for Gassaway
- Rucker
(13 miles [20.9 km] to the west)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Plainview
(13 miles [20.9 km] to the southwest)
- Plainview is located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Beechgrove
(13 miles [20.9 km] to the south)
- Naola ‑ Historic
(13 miles [20.9 km] to the southeast)
- Naola is located in Coffee County
- Jump to our Gazetteer entry for Naola
- Cainsville
(13 miles [20.9 km] to the northwest)
- Cainsville is located in Wilson County
- Jump to our Gazetteer entry for Cainsville
- Murfreesboro
(13 miles [20.9 km] to the west)
- Centertown
(14 miles [22.5 km] to the southeast)
- Centertown is located in Warren County
- Jump to our Gazetteer entry for Centertown
- Population from the 2020 Census: 256 people
- Round Top
(14 miles [22.5 km] to the northeast)
- Round Top is located in Wilson County
- Jump to our Gazetteer entry for Round Top
- Statesville
(14 miles [22.5 km] to the north)
- Statesville is located in Wilson County
- Jump to our Gazetteer entry for Statesville
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Barton Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|