Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Burton Mill, we use the following websites to find information relevant to Burton Mill and the surrounding area.
- Weather ...
- Before heading outdoors, you should check the weather:
- The National Weather Service forecast for Burton Mill
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Burton Mill:
- 35.670911, -84.269363
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- The Heavens-Above Website, centered on Burton Mill
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Loudon County as the starting point when you click on the link below:
- eBird sighting report for Loudon County
- Since Burton Mill is near Monroe County and also Blount County, we have provided a link to their eBird sighting reports:
- eBird sighting report for Monroe County
- eBird sighting report for Blount County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Waymark.com
Communities Also Named Burton Mill ...
We found two communities that share the name Burton Mill.
Within Tennessee, the name Burton Mill is unique.
Beyond Tennessee, we know of another two communities that are located throughout in the United States.
- Communities Elsewhere In North America ...
- Arkansas
- Lafayette County
- This Burton Mill is located in Lafayette County and lies 560 miles [901.2 km]<1> to the west southwest of the Burton Mill that is located in Loudon County.
- For more information, please visit our profile page for the Lafayette County community of Burton Mill.
- California
- Kern County
- This community is historic<2> and we have very little information. For the information that we do have, please visit our profile page for the California community of Burton Mill [Kern County].
- Arkansas
Curious and Interesting Names Near Burton Mill ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Big Piney
(3 miles [4.8 km] to the west) - Brakebill ‑ Historic
(4 miles [6.4 km] to the south) - Centersville
(4 miles [6.4 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Centersville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Centersville
- Centersville is located in Loudon County
- Eve Mills
(3 miles [4.8 km] to the southwest) - Fourmile Bridge ‑ Historic
(6 miles [9.7 km] to the south)- Note: The GPS coordinates that we are using for Fourmile Bridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fourmile Bridge
- Fourmile Bridge is located in Monroe County
- Greenback
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Greenback
- Greenback is located in Loudon County
- Population from the 2020 Census: 1,238 people
- Jump to TripAdvisor's Tourism page for Greenback <5>
- Halls Ferry
(3 miles [4.8 km] to the south)- Note: The GPS coordinates that we are using for Halls Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Ferry
- Halls Ferry is located in Monroe County
- Jena
(6 miles [9.7 km] to the east)- Jump to our Gazetteer entry for Jena
- Jena is located in Loudon County
- Estimated population in 2014: 2,279 people
- Little River ‑ Historic
(5 miles [8 km] to the southeast)- Note: The GPS coordinates that we are using for Little River have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little River
- Little River is located in Monroe County
- Continue List (6 more) ...
- Maple Spring
(Less than 2 miles to the northwest)- Note: The GPS coordinates that we are using for Maple Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Spring
- Maple Spring is located in Loudon County
- Meadow
(6 miles [9.7 km] to the east) - Oak Grove
(6 miles [9.7 km] to the south) - Poplar Springs
(5 miles [8 km] to the north)- Note: The GPS coordinates that we are using for Poplar Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Springs
- Poplar Springs is located in Loudon County
- Robinson Mill
(4 miles [6.4 km] to the northwest)- Note: The GPS coordinates that we are using for Robinson Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robinson Mill
- Robinson Mill is located in Loudon County
- Sunnyside
(6 miles [9.7 km] to the west)
- Maple Spring
How Far From Burton Mill to ...
We spend a lot of time looking through Gazetteers & Almanacs that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Burton Mill to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance beginning in Burton Mill and extending to:
- Loudon, which is the Seat of Loudon County, lies just to the Northwest.
- Nashville, which is the State Capital of Tennessee, lies 144 miles [231.7 km]<1> to the west northwest (WNW). If you could drive a straight line from Burton Mill to Nashville, with an average speed<6>of 63 miles [101.4 km] per hour, it would take less than three hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 9 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take 6 days.
- The White House (Washington, DC) is 455 miles [732.3 km] to the east northeast (ENE). Driving would take most of a day, a buggy would take 18 days and walking would take 26 days.
- The shortest distance<7> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,345 miles [10,211.3 km] and it lies to the northeast (NE).<8>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,055 miles [11,353.9 km] and it lies to the northeast (NE).<9>
- The distance to Saint Peter's Basilica (The Vatican) is 4,931 miles [7,935.7 km] and it lies to the northeast (NE).<10>
Off-the-Road Links ...
Unfortunately, we don't know of a website for Burton Mill. If you can help, please contact us through our Feedback Page.
The official website for Loudon County: www.loudoncounty.org/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Burton Mill) to Point B.Our distance measurements begin at a specific point in Burton Mill. The point we use is located at these GPS coordinates - Latitude: 35.6709, Longitude: -84.2694 In this case, the coordinates for Burton Mill have been provided by the Geographic Names Information System (GNIS). |
| <2> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Burton Mill, please let us know so that we can improve our accuracy. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <6> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <7> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Burton Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East. |
| <8> | The calculated bearing (or angle) to Jerusalem is 312.247 degrees. |
| <9> | The calculated bearing (or angle) to Mecca is 307.941 degrees. |
| <10> | The calculated bearing (or angle) to the Vatican is 308.756 degrees. |