RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Greene County >> Babbs Mill >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Tennessee


The Commemorative Quarter for Tennessee







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Babbs Mill, we use the following websites to find information relevant to Babbs Mill and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Babbs Mill:
    • 36.263713, -82.777100
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Babbs Mill
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Babbs Mill ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Craft Spring
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for Craft Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Craft Spring
    • Craft Spring is located in Greene County
  • Grandview
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grandview
    • Grandview is located in Greene County
  • Holland Mill
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Holland Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holland Mill
    • Holland Mill is located in Greene County
  • Locust Springs
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Locust Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Locust Springs
    • Locust Springs is located in Greene County
  • Mount Hope ‑ Historic
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mount Hope have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Hope
    • Mount Hope is located in Greene County
  • Pleasant Vale
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Pleasant Vale have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Vale
    • Pleasant Vale is located in Greene County
  • Roaring Springs
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Roaring Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roaring Springs
    • Roaring Springs is located in Greene County
  • Union Temple
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Union Temple have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union Temple
    • Union Temple is located in Greene County
  • Walkertown
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for Walkertown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walkertown
    • Walkertown is located in Greene County

How Far From Babbs Mill to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Babbs Mill to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<2> beginning in Babbs Mill and extending to:

  • Greeneville, which is the Seat of Greene County, lies just to the South Southwest.
  • Nashville, which is the State Capital of Tennessee, lies 222 miles [357.3 km]<2> to the west (W). If you could drive a straight line from Babbs Mill to Nashville, with an average speed<3>of 63 miles [101.4 km] per hour, it would take nearly four hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 13 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take 9 days.
  • The White House (Washington, DC) is 362 miles [582.6 km] to the east northeast (ENE). Driving would take 6 hours, a buggy would take 15 days and walking would take 21 days.
  • The shortest distance<4> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,255 miles [10,066.4 km] and it lies to the northeast (NE).<5>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,964 miles [11,207.5 km] and it lies to the northeast (NE).<6>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,840 miles [7,789.2 km] and it lies to the northeast (NE).<7>

Unfortunately, we don't know of a website for Babbs Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Babbs Mill) to Point B.Our distance measurements begin at a specific point in Babbs Mill. The point we use is located at these GPS coordinates - Latitude: 36.2637, Longitude: -82.7771       In this case, the coordinates for Babbs Mill have been provided by the Geographic Names Information System (GNIS).
<3>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<4>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Babbs Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<5>The calculated bearing (or angle) to Jerusalem is 311.363 degrees.
<6>The calculated bearing (or angle) to Mecca is 307.011 degrees.
<7>The calculated bearing (or angle) to the Vatican is 307.979 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024