RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Dakota >> Yankton County >> Valleyview >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
South Dakota

The Commemorative Quarter for South Dakota





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Valleyview in the Atlas, the following communities of the 1890's would have been found near the current location of Valleyview. The following communities are listed based on their distance, with the one closest to Valleyview listed first.

  • Volin
    (4 miles [6.4 km] to the east)
  • Gayville
    (7 miles [11.3 km] to the southeast)
  • Yankton
    (8 miles [12.9 km] to the southwest)
  • Mayfield
    (8 miles [12.9 km] to the north)
  • Wakonda
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Wakonda have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wakonda
    • Wakonda is located in Clay County
    • Population from the 2020 Census: 296 people
    • Jump to TripAdvisor's Tourism page for Wakonda <2>
  • Saint Helena
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Saint Helena have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint Helena
    • Saint Helena is located in Cedar County (NE)
    • Population from the 2020 Census: 91 people
    • Jump to TripAdvisor's Tourism page for Saint Helena <2>
  • Aten
    (11 miles [17.7 km] to the southwest)
  • Utica
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Utica
    • Utica is located in Yankton County
    • Population from the 2020 Census: 67 people
    • Jump to TripAdvisor's Tourism page for Utica <2>
  • Menominee
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Menominee have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Menominee
    • Menominee is located in Cedar County (NE)
  • Meckling
    (13 miles [20.9 km] to the southeast)
  • Jamesville
    (13 miles [20.9 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Jamesville. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Jamesville
    • Jamesville is located in Yankton County
    • Estimated population in 2014: 232 people
    • Google driving directions:
    • From your current location to Jamesville
    • From Valleyview to Jamesville
  • Lodi
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Lodi have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lodi
    • Lodi is located in Clay County
    • Estimated population in 2014: 82 people
  • Lakeport
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Lakeport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeport
    • Lakeport is located in Yankton County
  • Bloomingdale
    (16 miles [25.7 km] to the east)
  • Riverside ‑ Historic
    (16 miles [25.7 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Riverside. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Riverside
    • Riverside is located in Clay County
    • Google driving directions:
    • From your current location to Riverside
    • From Valleyview to Riverside
  • Spring Valley
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Valley
    • Spring Valley is located in Turner County
  • Lesterville
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Lesterville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lesterville
    • Lesterville is located in Yankton County
    • Population from the 2020 Census: 130 people
    • Jump to TripAdvisor's Tourism page for Lesterville <2>
  • Bow Valley
    (17 miles [27.4 km] to the south)
  • Saint James
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Saint James have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint James
    • Saint James is located in Cedar County (NE)
  • Dalesburg
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Dalesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dalesburg
    • Dalesburg is located in Clay County
  • Constance
    (19 miles [30.6 km] to the southwest)
  • Clay Point
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Clay Point have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clay Point
    • Clay Point is located in Clay County
  • Marshalltown ‑ Historic
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Marshalltown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marshalltown
    • Marshalltown is located in Clay County
  • Komstad ‑ Historic
    (19 miles [30.6 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Komstad. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Komstad
    • Komstad is located in Clay County
    • Estimated population in 2014: 12 people
    • Google driving directions:
    • From your current location to Komstad
    • From Valleyview to Komstad
  • Tabor
    (19 miles [30.6 km] to the west)

The official website for Yankton County: www.co.yankton.sd.us/

The official website for State of South Dakota: https://www.sd.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Valleyview, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025