Census Data for Grandview

As far as we can tell, Grandview has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Grandview, you might be interested in some nearby communities where we do:

• Pukwana
  (10 miles [16.1 km] to the northeast)
  • Note: The GPS coordinates that we are using for Pukwana have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Pukwana
  • Pukwana is located in Brule County
  • Jump to TripAdvisor's Tourism page for Pukwana <2>
• Chamberlain
  (11 miles [17.7 km] to the north)
  • Note: The GPS coordinates that we are using for Chamberlain have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Chamberlain
  • Chamberlain is located in Brule County
  • Jump to TripAdvisor's Tourism page for Chamberlain <2>
• Oacoma
  (11 miles [17.7 km] to the northwest)
  • Note: The GPS coordinates that we are using for Oacoma have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Oacoma
  • Oacoma is located in Lyman County
  • Jump to TripAdvisor's Tourism page for Oacoma <2>
• Kimball
  (18 miles [29 km] to the northeast)
  • Jump to our Gazetteer entry for Kimball
  • Kimball is located in Brule County
  • Jump to TripAdvisor's Tourism page for Kimball <2>
• East Lyman
  (20 miles [32.2 km] to the northwest)
  • Note: The GPS coordinates that we are using for East Lyman have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for East Lyman
  • East Lyman is located in Lyman County
  • The population in 2019 was estimated at 145 people. This represents a 2.03% decrease since 2010.The 2010 Census gave a population of 148 people.
• Reliance
  (22 miles [35.4 km] to the northwest)
  • Note: The GPS coordinates that we are using for Reliance have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Reliance
  • Reliance is located in Lyman County
  • Jump to TripAdvisor's Tourism page for Reliance <2>
• Platte
  (28 miles [45.1 km] to the southeast)
  • Jump to our Gazetteer entry for Platte
  • Platte is located in Charles Mix County
  • Jump to TripAdvisor's Tourism page for Platte <2>
• Gregory
  (29 miles [46.7 km] to the south)
  • Note: The GPS coordinates that we are using for Gregory have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Gregory
  • Gregory is located in Gregory County
  • Jump to TripAdvisor's Tourism page for Gregory <2>
• White Lake
  (29 miles [46.7 km] to the east)
  • Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for White Lake
  • White Lake is located in Aurora County
  • Jump to TripAdvisor's Tourism page for White Lake <2>
• Dallas
  (30 miles [48.3 km] to the south)
  • Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Dallas
  • Dallas is located in Gregory County
  • Jump to TripAdvisor's Tourism page for Dallas <2>

Brule County ...

Grandview is located in Brule County<3>.

For more information, please visit our Census Page for Brule County.

Miscellaneous Information for Grandview ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Brule County or the community of Grandview:

• The GNIS Codes ...
  • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Grandview:
  • GNIS ID for Grandview: 1259252
  • GNIS ID for Brule County: 1265768
  • GNIS ID for State of South Dakota: 1785534

• Misc. Census Codes ...
  • Grandview is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Grandview.

Off-the-Road Links ...

Unfortunately, we don't know of a website for Grandview. If you can help, please contact us through our Feedback Page.

The official website for State of South Dakota: sd.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)