Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Chery Twp. Pioneer Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Chery Twp. Pioneer Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Chery Twp. Pioneer Cemetery (FG ID #2408942). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Chery Twp. Pioneer Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Wessington Springs
(7 miles [11.3 km] to the southeast)- Jump to our Gazetteer entry for Wessington Springs
- Wessington Springs is located in Jerauld County
- Population from the 2020 Census: 899 people
- Jump to TripAdvisor's Tourism page for Wessington Springs <3>
- Lane
(13 miles [20.9 km] to the southeast)- Note: The GPS coordinates that we are using for Lane have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lane
- Lane is located in Jerauld County
- Population from the 2020 Census: 59 people
- Jump to TripAdvisor's Tourism page for Lane <3>
- Alpena
(14 miles [22.5 km] to the east)- Note: The GPS coordinates that we are using for Alpena have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alpena
- Alpena is located in Jerauld County
- Population from the 2020 Census: 278 people
- Jump to TripAdvisor's Tourism page for Alpena <3>
- Virgil
(14 miles [22.5 km] to the northeast)- Note: The GPS coordinates that we are using for Virgil have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Virgil
- Virgil is located in Beadle County
- Population from the 2020 Census: 18 people
- Jump to TripAdvisor's Tourism page for Virgil <3>
- Crow Lake
(15 miles [24.1 km] to the south) - Gann Valley
(18 miles [29 km] to the southwest)- Jump to our Gazetteer entry for Gann Valley
- Gann Valley is located in Buffalo County
- Population from the 2010 Census: 14 people
- Jump to TripAdvisor's Tourism page for Gann Valley <3>
- Wolsey
(19 miles [30.6 km] to the northeast)- Note: The GPS coordinates that we are using for Wolsey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wolsey
- Wolsey is located in Beadle County
- Population from the 2020 Census: 400 people
- Jump to TripAdvisor's Tourism page for Wolsey <3>
- Wessington
(19 miles [30.6 km] to the north)- Note: The GPS coordinates that we are using for Wessington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wessington
- Wessington is located in Beadle County
- Population from the 2020 Census: 179 people
- Jump to TripAdvisor's Tourism page for Wessington <3>
- Woonsocket
(21 miles [33.8 km] to the east)- Jump to our Gazetteer entry for Woonsocket
- Woonsocket is located in Sanborn County
- Population from the 2020 Census: 639 people
- Jump to TripAdvisor's Tourism page for Woonsocket <3>
- Ames
(21 miles [33.8 km] to the west)- Jump to our Gazetteer entry for Ames
- Ames is located in Hand County
- Storla
(26 miles [41.8 km] to the southeast) - Cuthbert
(26 miles [41.8 km] to the southeast)- Jump to our Gazetteer entry for Cuthbert
- Cuthbert is located in Sanborn County
- Huron
(26 miles [41.8 km] to the northeast)- Jump to our Gazetteer entry for Huron
- Huron is located in Beadle County
- Population from the 2020 Census: 13,420 people
- Jump to TripAdvisor's Tourism page for Huron <3>
- Saint Lawrence
(27 miles [43.5 km] to the northwest)- Note: The GPS coordinates that we are using for Saint Lawrence have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Lawrence
- Saint Lawrence is located in Hand County
- Population from the 2020 Census: 181 people
- Jump to TripAdvisor's Tourism page for Saint Lawrence <3>
- Morningside
(27 miles [43.5 km] to the northeast)- Jump to our Gazetteer entry for Morningside
- Morningside is located in Beadle County
- Broadland
(27 miles [43.5 km] to the northeast)- Jump to our Gazetteer entry for Broadland
- Broadland is located in Beadle County
- Population from the 2020 Census: 32 people
- Forestburg
(29 miles [46.7 km] to the east)- Jump to our Gazetteer entry for Forestburg
- Forestburg is located in Sanborn County
- Population from the 2010 Census: 73 people
- Miller
(29 miles [46.7 km] to the northwest)- Jump to our Gazetteer entry for Miller
- Miller is located in Hand County
- Population from the 2020 Census: 1,306 people
- Jump to TripAdvisor's Tourism page for Miller <3>
- Bonilla
(29 miles [46.7 km] to the north)- Jump to our Gazetteer entry for Bonilla
- Bonilla is located in Beadle County
Off-the-Road Links ...
The official website for State of South Dakota: sd.gov/
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Chery Twp. Pioneer Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.1688, Longitude: -98.6669 |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |