RoadsideThoughts
A Gazetteer for the United States and Canada
Community
Index
State
Index
Province
Index
County
Index
State
Quarters
 
Sitemap
     

Taylors, South Carolina

Community
Profile
Nearby Census Genealogy
Helper
Cemeteries Tidbits &
Trivia
Local
Newspapers
TripAdvisor
Links
Interactive
Map
Other SC
Communities

















Our Genealogy Helper for Taylors ...

We have a couple of goals for our Gazetteer:

  • That it be a tool that can help us with planning our trips.
  • That it also helps us to understand the community in which our ancestors lived, the community that was part of their daily lives.

By learning about Taylors (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this, our Genealogical Helper for Taylors. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Taylors is located in Greenville County.

To see how the shape of South Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Greenville County: Henderson (NC), Polk (NC), Transylvania (NC), Abbeville, Anderson, Laurens, Pickens & Spartanburg.

Below are the counties that are near Taylors. For each of these counties, we show a sample of those communities that are closest to Taylors:

  • Greenville County     (The home county of Taylors)
    • Chick Springs [Greenville County]
      • Jump to our Gazetteer entry for Chick Springs
      • Chick Springs [Greenville County] lies less than 2 miles<1> to the east of Taylors
      • Note: The GPS coordinates that we are using for Chick Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Chick Springs
    • East Gate Village [Greenville County]
      • Jump to our Gazetteer entry for East Gate Village
      • East Gate Village [Greenville County] lies 2 miles [3.2 km]<1> to the south of Taylors
      • Note: The GPS coordinates that we are using for East Gate Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on East Gate Village
    • Wade Hampton [Greenville County]
      • Jump to our Gazetteer entry for Wade Hampton
      • Wade Hampton [Greenville County] lies 2 miles [3.2 km]<1> to the southwest of Taylors
      • Note: The GPS coordinates that we are using for Wade Hampton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Wade Hampton
    • Greer [Greenville County]
      • Jump to our Gazetteer entry for Greer
      • Greer [Greenville County] lies 4 miles [6.4 km]<1> to the east of Taylors
      • Population from the 2020 Census: 35,316 people
      • Jump to Google Maps centered on Greer
      • Jump to TripAdvisor's Tourism page for Greer<3>
    • O'Neal [Greenville County]
      • Jump to our Gazetteer entry for O'Neal
      • O'Neal [Greenville County] lies 6 miles [9.7 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for O'Neal have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on O'Neal
    • Pelham [Greenville County]
      • Jump to our Gazetteer entry for Pelham
      • Pelham [Greenville County] lies 6 miles [9.7 km]<1> to the southeast of Taylors
      • Note: The GPS coordinates that we are using for Pelham have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Pelham
    • Greenville [Greenville County]
      • Jump to our Gazetteer entry for Greenville
      • Greenville [Greenville County] lies 7 miles [11.3 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 72,227 people
      • Jump to Google Maps centered on Greenville
      • Jump to TripAdvisor's Tourism page for Greenville<3>
    • Sans Souci [Greenville County]
      • Jump to our Gazetteer entry for Sans Souci
      • Sans Souci [Greenville County] lies 7 miles [11.3 km]<1> to the southwest of Taylors
      • Note: The GPS coordinates that we are using for Sans Souci have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Sans Souci
    • Five Forks [Greenville County]
      • Jump to our Gazetteer entry for Five Forks
      • Five Forks [Greenville County] lies 8 miles [12.9 km]<1> to the southeast of Taylors
      • Note: The GPS coordinates that we are using for Five Forks have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Five Forks
    • City View [Greenville County]
      • Jump to our Gazetteer entry for City View
      • City View [Greenville County] lies 8 miles [12.9 km]<1> to the southwest of Taylors
      • Note: The GPS coordinates that we are using for City View have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on City View
    • Travelers Rest [Greenville County]
      • Jump to our Gazetteer entry for Travelers Rest
      • Travelers Rest [Greenville County] lies 8 miles [12.9 km]<1> to the west of Taylors
      • Population from the 2020 Census: 8,202 people
      • Jump to Google Maps centered on Travelers Rest
      • Jump to TripAdvisor's Tourism page for Travelers Rest<3>
    • Dunean [Greenville County]
      • Jump to our Gazetteer entry for Dunean
      • Dunean [Greenville County] lies 9 miles [14.5 km]<1> to the southwest of Taylors
      • Note: The GPS coordinates that we are using for Dunean have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Dunean
    • Berea [Greenville County]
      • Jump to our Gazetteer entry for Berea
      • Berea [Greenville County] lies 9 miles [14.5 km]<1> to the west of Taylors
      • Note: The GPS coordinates that we are using for Berea have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Berea
  • Abbeville County
    • Honea Path [Abbeville County]
      • Jump to our Gazetteer entry for Honea Path
      • Honea Path [Abbeville County] lies 33 miles [53.1 km]<1> to the south of Taylors
      • Population from the 2020 Census: 3,851 people
      • Jump to Google Maps centered on Honea Path
      • Jump to TripAdvisor's Tourism page for Honea Path<3>
    • Ware Shoals [Abbeville County]
      • Jump to our Gazetteer entry for Ware Shoals
      • Ware Shoals [Abbeville County] lies 36 miles [57.9 km]<1> to the south of Taylors
      • Population from the 2020 Census: 2,152 people
      • Jump to Google Maps centered on Ware Shoals
      • Jump to TripAdvisor's Tourism page for Ware Shoals<3>
    • Donalds [Abbeville County]
      • Jump to our Gazetteer entry for Donalds
      • Donalds [Abbeville County] lies 37 miles [59.5 km]<1> to the south of Taylors
      • Population from the 2020 Census: 330 people
      • Jump to Google Maps centered on Donalds
      • Jump to TripAdvisor's Tourism page for Donalds<3>
    • Due West [Abbeville County]
      • Jump to our Gazetteer entry for Due West
      • Due West [Abbeville County] lies 40 miles [64.4 km]<1> to the south of Taylors
      • Population from the 2020 Census: 1,198 people
      • Jump to Google Maps centered on Due West
      • Jump to TripAdvisor's Tourism page for Due West<3>
  • Anderson County
    • Powderville [Anderson County]
      • Jump to our Gazetteer entry for Powderville
      • Powderville [Anderson County] lies 13 miles [20.9 km]<1> to the southwest of Taylors
      • Note: The GPS coordinates that we are using for Powderville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Powderville
    • Piedmont [Anderson County]
    • Pelzer [Anderson County]
      • Jump to our Gazetteer entry for Pelzer
      • Pelzer [Anderson County] lies 21 miles [33.8 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 1,413 people
      • Jump to Google Maps centered on Pelzer
      • Jump to TripAdvisor's Tourism page for Pelzer<3>
    • West Pelzer [Anderson County]
      • Jump to our Gazetteer entry for West Pelzer
      • West Pelzer [Anderson County] lies 21 miles [33.8 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 953 people
      • Note: The GPS coordinates that we are using for West Pelzer have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on West Pelzer
    • Williamston [Anderson County]
      • Jump to our Gazetteer entry for Williamston
      • Williamston [Anderson County] lies 23 miles [37 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 4,298 people
      • Jump to Google Maps centered on Williamston
      • Jump to TripAdvisor's Tourism page for Williamston<3>
    • Belton [Anderson County]
      • Jump to our Gazetteer entry for Belton
      • Belton [Anderson County] lies 29 miles [46.7 km]<1> to the south of Taylors
      • Population from the 2020 Census: 4,484 people
      • Jump to Google Maps centered on Belton
      • Jump to TripAdvisor's Tourism page for Belton<3>
    • La France [Anderson County]
    • Pendleton [Anderson County]
      • Jump to our Gazetteer entry for Pendleton
      • Pendleton [Anderson County] lies 33 miles [53.1 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 3,313 people
      • Jump to Google Maps centered on Pendleton
      • Jump to TripAdvisor's Tourism page for Pendleton<3>
    • Sandy Springs [Anderson County]
    • Anderson [Anderson County]
      • Jump to our Gazetteer entry for Anderson
      • Anderson [Anderson County] lies 34 miles [54.7 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 27,701 people
      • Jump to Google Maps centered on Anderson
      • Jump to TripAdvisor's Tourism page for Anderson<3>
  • Cherokee County
    • Chesnee [Cherokee County]
      • Jump to our Gazetteer entry for Chesnee
      • Chesnee [Cherokee County] lies 29 miles [46.7 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 942 people
      • Jump to Google Maps centered on Chesnee
      • Jump to TripAdvisor's Tourism page for Chesnee<3>
    • Gaffney [Cherokee County]
      • Jump to our Gazetteer entry for Gaffney
      • Gaffney [Cherokee County] lies 38 miles [61.2 km]<1> to the east of Taylors
      • Population from the 2020 Census: 12,695 people
      • Jump to Google Maps centered on Gaffney
      • Jump to TripAdvisor's Tourism page for Gaffney<3>
  • Laurens County
    • Green Pond [Laurens County]
      • Jump to our Gazetteer entry for Green Pond
      • Green Pond [Laurens County] lies 21 miles [33.8 km]<1> to the south of Taylors
      • Jump to Google Maps centered on Green Pond
    • Gray Court [Laurens County]
      • Jump to our Gazetteer entry for Gray Court
      • Gray Court [Laurens County] lies 23 miles [37 km]<1> to the southeast of Taylors
      • Population from the 2020 Census: 826 people
      • Jump to Google Maps centered on Gray Court
      • Jump to TripAdvisor's Tourism page for Gray Court<3>
    • Princeton [Laurens County]
      • Jump to our Gazetteer entry for Princeton
      • Princeton [Laurens County] lies 29 miles [46.7 km]<1> to the south of Taylors
      • Note: The GPS coordinates that we are using for Princeton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Princeton
    • Laurens [Laurens County]
      • Jump to our Gazetteer entry for Laurens
      • Laurens [Laurens County] lies 33 miles [53.1 km]<1> to the southeast of Taylors
      • Population from the 2020 Census: 8,852 people
      • Jump to Google Maps centered on Laurens
      • Jump to TripAdvisor's Tourism page for Laurens<3>
    • Clinton [Laurens County]
      • Jump to our Gazetteer entry for Clinton
      • Clinton [Laurens County] lies 39 miles [62.8 km]<1> to the southeast of Taylors
      • Population from the 2020 Census: 8,304 people
      • Jump to Google Maps centered on Clinton
      • Jump to TripAdvisor's Tourism page for Clinton<3>
  • Oconee County
    • Newry [Oconee County]
    • Salem [Oconee County]
      • Jump to our Gazetteer entry for Salem
      • Salem [Oconee County] lies 38 miles [61.2 km]<1> to the west of Taylors
      • Population from the 2020 Census: 153 people
      • Jump to Google Maps centered on Salem
      • Jump to TripAdvisor's Tourism page for Salem<3>
    • Seneca [Oconee County]
      • Jump to our Gazetteer entry for Seneca
      • Seneca [Oconee County] lies 40 miles [64.4 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 8,564 people
      • Jump to Google Maps centered on Seneca
      • Jump to TripAdvisor's Tourism page for Seneca<3>
    • Tamassee [Oconee County]
  • Pickens County
    • Dacusville [Pickens County]
      • Jump to our Gazetteer entry for Dacusville
      • Dacusville [Pickens County] lies 14 miles [22.5 km]<1> to the west of Taylors
      • Note: The GPS coordinates that we are using for Dacusville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Dacusville
    • Easley [Pickens County]
      • Jump to our Gazetteer entry for Easley
      • Easley [Pickens County] lies 18 miles [29 km]<1> to the west of Taylors
      • Population from the 2020 Census: 21,626 people
      • Jump to Google Maps centered on Easley
      • Jump to TripAdvisor's Tourism page for Easley<3>
    • Arial [Pickens County]
      • Jump to our Gazetteer entry for Arial
      • Arial [Pickens County] lies 19 miles [30.6 km]<1> to the west of Taylors
      • Note: The GPS coordinates that we are using for Arial have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Arial
    • Liberty [Pickens County]
      • Jump to our Gazetteer entry for Liberty
      • Liberty [Pickens County] lies 23 miles [37 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 3,150 people
      • Jump to Google Maps centered on Liberty
      • Jump to TripAdvisor's Tourism page for Liberty<3>
    • Pickens [Pickens County]
      • Jump to our Gazetteer entry for Pickens
      • Pickens [Pickens County] lies 23 miles [37 km]<1> to the west of Taylors
      • Population from the 2020 Census: 3,185 people
      • Jump to Google Maps centered on Pickens
      • Jump to TripAdvisor's Tourism page for Pickens<3>
    • Norris [Pickens County]
      • Jump to our Gazetteer entry for Norris
      • Norris [Pickens County] lies 27 miles [43.5 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 831 people
      • Jump to Google Maps centered on Norris
      • Jump to TripAdvisor's Tourism page for Norris<3>
    • Sunset [Pickens County]
    • Rocky Bottom [Pickens County]
      • Jump to our Gazetteer entry for Rocky Bottom
      • Rocky Bottom [Pickens County] lies 29 miles [46.7 km]<1> to the west of Taylors
      • Jump to Google Maps centered on Rocky Bottom
    • Central [Pickens County]
      • Jump to our Gazetteer entry for Central
      • Central [Pickens County] lies 30 miles [48.3 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 5,452 people
      • Jump to Google Maps centered on Central
      • Jump to TripAdvisor's Tourism page for Central<3>
    • Six Mile [Pickens County]
      • Jump to our Gazetteer entry for Six Mile
      • Six Mile [Pickens County] lies 30 miles [48.3 km]<1> to the west of Taylors
      • Population from the 2020 Census: 675 people
      • Jump to Google Maps centered on Six Mile
      • Jump to TripAdvisor's Tourism page for Six Mile<3>
    • Clemson [Pickens County]
      • Jump to our Gazetteer entry for Clemson
      • Clemson [Pickens County] lies 34 miles [54.7 km]<1> to the southwest of Taylors
      • Population from the 2020 Census: 17,780 people
      • Jump to Google Maps centered on Clemson
      • Jump to TripAdvisor's Tourism page for Clemson<3>
  • Spartanburg County
    • Duncan [Spartanburg County]
      • Jump to our Gazetteer entry for Duncan
      • Duncan [Spartanburg County] lies 8 miles [12.9 km]<1> to the east of Taylors
      • Population from the 2020 Census: 3,715 people
      • Jump to Google Maps centered on Duncan
      • Jump to TripAdvisor's Tourism page for Duncan<3>
    • Lyman [Spartanburg County]
      • Jump to our Gazetteer entry for Lyman
      • Lyman [Spartanburg County] lies 10 miles [16.1 km]<1> to the east of Taylors
      • Population from the 2020 Census: 3,796 people
      • Jump to Google Maps centered on Lyman
      • Jump to TripAdvisor's Tourism page for Lyman<3>
    • Reidville [Spartanburg County]
      • Jump to our Gazetteer entry for Reidville
      • Reidville [Spartanburg County] lies 11 miles [17.7 km]<1> to the east of Taylors
      • Population from the 2020 Census: 693 people
      • Jump to Google Maps centered on Reidville
      • Jump to TripAdvisor's Tourism page for Reidville<3>
    • Startex [Spartanburg County]
    • Wellford [Spartanburg County]
      • Jump to our Gazetteer entry for Wellford
      • Wellford [Spartanburg County] lies 11 miles [17.7 km]<1> to the east of Taylors
      • Population from the 2020 Census: 2,774 people
      • Jump to Google Maps centered on Wellford
      • Jump to TripAdvisor's Tourism page for Wellford<3>
    • Brookside Village [Spartanburg County]
      • Jump to our Gazetteer entry for Brookside Village
      • Brookside Village [Spartanburg County] lies 12 miles [19.3 km]<1> to the east of Taylors
      • Note: The GPS coordinates that we are using for Brookside Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Brookside Village
    • Gramling [Spartanburg County]
    • Inman Mills [Spartanburg County]
      • Jump to our Gazetteer entry for Inman Mills
      • Inman Mills [Spartanburg County] lies 14 miles [22.5 km]<1> to the northeast of Taylors
      • Jump to Google Maps centered on Inman Mills
    • Inman [Spartanburg County]
      • Jump to our Gazetteer entry for Inman
      • Inman [Spartanburg County] lies 14 miles [22.5 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 2,480 people
      • Jump to Google Maps centered on Inman
      • Jump to TripAdvisor's Tourism page for Inman<3>
    • Crescent [Spartanburg County]
      • Jump to our Gazetteer entry for Crescent
      • Crescent [Spartanburg County] lies 14 miles [22.5 km]<1> to the southeast of Taylors
      • Jump to Google Maps centered on Crescent
    • Campobello [Spartanburg County]
      • Jump to our Gazetteer entry for Campobello
      • Campobello [Spartanburg County] lies 15 miles [24.1 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 603 people
      • Jump to Google Maps centered on Campobello
      • Jump to TripAdvisor's Tourism page for Campobello<3>
    • Green Pond [Spartanburg County]
      • Jump to our Gazetteer entry for Green Pond
      • Green Pond [Spartanburg County] lies 15 miles [24.1 km]<1> to the southeast of Taylors
      • Jump to Google Maps centered on Green Pond
    • Fairforest [Spartanburg County]
  • Union County
    • Jonesville [Union County]
      • Jump to our Gazetteer entry for Jonesville
      • Jonesville [Union County] lies 35 miles [56.3 km]<1> to the east of Taylors
      • Population from the 2020 Census: 819 people
      • Jump to Google Maps centered on Jonesville
      • Jump to TripAdvisor's Tourism page for Jonesville<3>
    • Buffalo [Union County]
    • Union [Union County]
      • Jump to our Gazetteer entry for Union
      • Union [Union County] lies 40 miles [64.4 km]<1> to the east of Taylors
      • Population from the 2020 Census: 7,535 people
      • Jump to Google Maps centered on Union
      • Jump to TripAdvisor's Tourism page for Union<3>
  • Buncombe County (NC)
  • Henderson County (NC)
    • Saluda [Henderson County]
      • Jump to our Gazetteer entry for Saluda
      • Saluda [Henderson County] lies 22 miles [35.4 km]<1> to the north of Taylors
      • Population from the 2020 Census: 703 people
      • Note: The GPS coordinates that we are using for Saluda have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Saluda
      • Jump to TripAdvisor's Tourism page for Saluda<3>
    • Tuxedo [Henderson County]
      • Jump to our Gazetteer entry for Tuxedo
      • Tuxedo [Henderson County] lies 22 miles [35.4 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for Tuxedo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Tuxedo
      • Jump to TripAdvisor's Tourism page for Tuxedo<3>
    • Zirconia [Henderson County]
    • Mount Olive [Henderson County]
      • Jump to our Gazetteer entry for Mount Olive
      • Mount Olive [Henderson County] lies 23 miles [37 km]<1> to the northwest of Taylors
      • Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Mount Olive
    • Claremont [Henderson County]
      • Jump to our Gazetteer entry for Claremont
      • Claremont [Henderson County] lies 24 miles [38.6 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for Claremont have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Claremont
    • East Flat Rock [Henderson County]
      • Jump to our Gazetteer entry for East Flat Rock
      • East Flat Rock [Henderson County] lies 25 miles [40.2 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for East Flat Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on East Flat Rock
      • Jump to TripAdvisor's Tourism page for East Flat Rock<3>
    • Flat Rock [Henderson County]
      • Jump to our Gazetteer entry for Flat Rock
      • Flat Rock [Henderson County] lies 25 miles [40.2 km]<1> to the north of Taylors
      • Population from the 2020 Census: 3,408 people
      • Note: The GPS coordinates that we are using for Flat Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Flat Rock
      • Jump to TripAdvisor's Tourism page for Flat Rock<3>
    • Upward [Henderson County]
      • Jump to our Gazetteer entry for Upward
      • Upward [Henderson County] lies 26 miles [41.8 km]<1> to the north of Taylors
      • Jump to Google Maps centered on Upward
    • Barker Heights [Henderson County]
      • Jump to our Gazetteer entry for Barker Heights
      • Barker Heights [Henderson County] lies 28 miles [45.1 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for Barker Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Barker Heights
    • Dana [Henderson County]
      • Jump to our Gazetteer entry for Dana
      • Dana [Henderson County] lies 28 miles [45.1 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for Dana have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Dana
    • Hendersonville [Henderson County]
      • Jump to our Gazetteer entry for Hendersonville
      • Hendersonville [Henderson County] lies 28 miles [45.1 km]<1> to the north of Taylors
      • Population from the 2020 Census: 14,235 people
      • Jump to Google Maps centered on Hendersonville
      • Jump to TripAdvisor's Tourism page for Hendersonville<3>
    • Valley Hill [Henderson County]
      • Jump to our Gazetteer entry for Valley Hill
      • Valley Hill [Henderson County] lies 28 miles [45.1 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for Valley Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Valley Hill
    • Laurel Park [Henderson County]
      • Jump to our Gazetteer entry for Laurel Park
      • Laurel Park [Henderson County] lies 29 miles [46.7 km]<1> to the northwest of Taylors
      • Population from the 2020 Census: 2,339 people
      • Note: The GPS coordinates that we are using for Laurel Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Laurel Park
      • Jump to TripAdvisor's Tourism page for Laurel Park<3>
  • Polk County (NC)
    • Tryon [Polk County]
      • Jump to our Gazetteer entry for Tryon
      • Tryon [Polk County] lies 20 miles [32.2 km]<1> to the north of Taylors
      • Population from the 2020 Census: 1,635 people
      • Jump to Google Maps centered on Tryon
      • Jump to TripAdvisor's Tourism page for Tryon<3>
    • Lynn [Polk County]
      • Jump to our Gazetteer entry for Lynn
      • Lynn [Polk County] lies 21 miles [33.8 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for Lynn have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Lynn
    • Columbus [Polk County]
      • Jump to our Gazetteer entry for Columbus
      • Columbus [Polk County] lies 23 miles [37 km]<1> to the north of Taylors
      • Population from the 2020 Census: 1,007 people
      • Jump to Google Maps centered on Columbus
      • Jump to TripAdvisor's Tourism page for Columbus<3>
    • Mill Spring [Polk County]
      • Jump to our Gazetteer entry for Mill Spring
      • Mill Spring [Polk County] lies 27 miles [43.5 km]<1> to the north of Taylors
      • Note: The GPS coordinates that we are using for Mill Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Mill Spring
      • Jump to TripAdvisor's Tourism page for Mill Spring<3>
  • Rutherford County (NC)
    • Chimney Rock [Rutherford County]
      • Jump to our Gazetteer entry for Chimney Rock
      • Chimney Rock [Rutherford County] lies 35 miles [56.3 km]<1> to the north of Taylors
      • Population from the 2020 Census: 116 people
      • Jump to Google Maps centered on Chimney Rock
      • Jump to TripAdvisor's Tourism page for Chimney Rock<3>
    • Village of Chimney Rock Village [Rutherford County]
      • Jump to our Gazetteer entry for Village of Chimney Rock Village
      • Village of Chimney Rock Village [Rutherford County] lies 36 miles [57.9 km]<1> to the north of Taylors
      • Estimated population in 2015: 108 people
      • Note: The GPS coordinates that we are using for Village of Chimney Rock Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Village of Chimney Rock Village
    • Lake Lure [Rutherford County]
      • Jump to our Gazetteer entry for Lake Lure
      • Lake Lure [Rutherford County] lies 36 miles [57.9 km]<1> to the north of Taylors
      • Population from the 2020 Census: 1,153 people
      • Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Lake Lure
      • Jump to TripAdvisor's Tourism page for Lake Lure<3>
    • Alexander Mills [Rutherford County]
      • Jump to our Gazetteer entry for Alexander Mills
      • Alexander Mills [Rutherford County] lies 36 miles [57.9 km]<1> to the northeast of Taylors
      • Note: The GPS coordinates that we are using for Alexander Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Alexander Mills
    • Rutherfordton [Rutherford County]
      • Jump to our Gazetteer entry for Rutherfordton
      • Rutherfordton [Rutherford County] lies 36 miles [57.9 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 4,090 people
      • Jump to Google Maps centered on Rutherfordton
      • Jump to TripAdvisor's Tourism page for Rutherfordton<3>
    • Forest City [Rutherford County]
      • Jump to our Gazetteer entry for Forest City
      • Forest City [Rutherford County] lies 37 miles [59.5 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 7,138 people
      • Jump to Google Maps centered on Forest City
      • Jump to TripAdvisor's Tourism page for Forest City<3>
    • Ruth [Rutherford County]
      • Jump to our Gazetteer entry for Ruth
      • Ruth [Rutherford County] lies 37 miles [59.5 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 400 people
      • Note: The GPS coordinates that we are using for Ruth have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Ruth
    • Spindale [Rutherford County]
      • Jump to our Gazetteer entry for Spindale
      • Spindale [Rutherford County] lies 37 miles [59.5 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 4,175 people
      • Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Spindale
      • Jump to TripAdvisor's Tourism page for Spindale<3>
    • Bostic [Rutherford County]
      • Jump to our Gazetteer entry for Bostic
      • Bostic [Rutherford County] lies 40 miles [64.4 km]<1> to the northeast of Taylors
      • Population from the 2020 Census: 379 people
      • Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Bostic
      • Jump to TripAdvisor's Tourism page for Bostic<3>
  • Transylvania County (NC)
    • Cedar Mountain [Transylvania County]
      • Jump to our Gazetteer entry for Cedar Mountain
      • Cedar Mountain [Transylvania County] lies 24 miles [38.6 km]<1> to the northwest of Taylors
      • Note: The GPS coordinates that we are using for Cedar Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Cedar Mountain
      • Jump to TripAdvisor's Tourism page for Cedar Mountain<3>
    • Penrose [Transylvania County]
      • Jump to our Gazetteer entry for Penrose
      • Penrose [Transylvania County] lies 30 miles [48.3 km]<1> to the northwest of Taylors
      • Note: The GPS coordinates that we are using for Penrose have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Penrose
      • Jump to TripAdvisor's Tourism page for Penrose<3>
    • Brevard [Transylvania County]
      • Jump to our Gazetteer entry for Brevard
      • Brevard [Transylvania County] lies 32 miles [51.5 km]<1> to the northwest of Taylors
      • Population from the 2020 Census: 7,899 people
      • Jump to Google Maps centered on Brevard
      • Jump to TripAdvisor's Tourism page for Brevard<3>
    • Pisgah Forest [Transylvania County]
      • Jump to our Gazetteer entry for Pisgah Forest
      • Pisgah Forest [Transylvania County] lies 32 miles [51.5 km]<1> to the northwest of Taylors
      • Note: The GPS coordinates that we are using for Pisgah Forest have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Pisgah Forest
      • Jump to TripAdvisor's Tourism page for Pisgah Forest<3>
    • Rosman [Transylvania County]
      • Jump to our Gazetteer entry for Rosman
      • Rosman [Transylvania County] lies 33 miles [53.1 km]<1> to the northwest of Taylors
      • Population from the 2020 Census: 624 people
      • Note: The GPS coordinates that we are using for Rosman have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Rosman
      • Jump to TripAdvisor's Tourism page for Rosman<3>
    • Balsam Grove [Transylvania County]
    • Lake Toxaway [Transylvania County]

For an expanded list of the communities that are closest to Taylors, see our County-by-County Page for Taylors.

Newspapers Published in the Vicinity of Taylors ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 5 newspapers that have been published in the area around Taylors.

We have organized these newspapers into two lists:

  • A Local Newspaper List - focusing on the papers published in the immediate area of Taylors. There are actually two parts to this list - papers printed in the immediate area of Taylors and those printed in the larger area surrounding Taylors.
  • An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 4 miles [6.4 km] of Taylors.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Taylors:

  • Of Special Interest ...
    • The GenDisasters website specializes in newspaper articles about tragedies and disasters. While it makes interesting reading all by itself, it should be of special interest to genealogists and family historians looking for people who were either affected by or directly involved in such tragedies.
    • Stories from North Carolina
    • Stories from South Carolina

Cemeteries Near Taylors ...

Below are cemeteries that are in the vicinity of Taylors.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Taylors covers a larger area, with the cemeteries listed in alphabetical order.

  • Buena Vista Cemetery
    • Jump to our Gazetteer entry for the Buena Vista Cemetery
    • Note: The GPS coordinates that we are using for the Buena Vista Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Buena Vista Cemetery
  • Fairview Cemetery
    • Jump to our Gazetteer entry for the Fairview Cemetery
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Fairview Cemetery
  • Needmore Cemetery
    • Jump to our Gazetteer entry for the Needmore Cemetery
    • Note: The GPS coordinates that we are using for the Needmore Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Needmore Cemetery
  • Woodland Memorial Cemetery
    • Jump to our Gazetteer entry for the Woodland Memorial Cemetery
    • Note: The GPS coordinates that we are using for the Woodland Memorial Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Woodland Memorial Cemetery
  • White Oak Cemetery
    • Jump to our Gazetteer entry for the White Oak Cemetery
    • Note: The GPS coordinates that we are using for the White Oak Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on White Oak Cemetery
  • Hudson Family Cemetery
    • Jump to our Gazetteer entry for the Hudson Family Cemetery
    • Note: We haven't been able to verify our GPS coordinates for the Hudson Family Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to Google Maps centered on Hudson Family Cemetery
  • Continue List ...
    • Double Springs Cemetery
      • Jump to our Gazetteer entry for the Double Springs Cemetery
      • Note: The GPS coordinates that we are using for the Double Springs Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Double Springs Cemetery
    • Greer City Cemetery
      • Jump to our Gazetteer entry for the Greer City Cemetery
      • Note: The GPS coordinates that we are using for the Greer City Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Greer City Cemetery
    • Mt. View Cemetery
    • Milford Cemetery
      • Jump to our Gazetteer entry for the Milford Cemetery
      • Note: The GPS coordinates that we are using for the Milford Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Milford Cemetery
    • Jackson Grove Cemetery
      • Jump to our Gazetteer entry for the Jackson Grove Cemetery
      • Note: The GPS coordinates that we are using for the Jackson Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Jackson Grove Cemetery
    • Faith Temple Cemetery
      • Jump to our Gazetteer entry for the Faith Temple Cemetery
      • Note: The GPS coordinates that we are using for the Faith Temple Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Faith Temple Cemetery
    • Hillcrest Memorial Gardens
      • Jump to our Gazetteer entry for the Hillcrest Memorial Gardens
      • Note: The GPS coordinates that we are using for the Hillcrest Memorial Gardens have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Hillcrest Memorial Gardens
    • Rector Cemetery
      • Jump to our Gazetteer entry for the Rector Cemetery
      • Note: The GPS coordinates that we are using for the Rector Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Rector Cemetery
    • Mosteller Cemetery
      • Jump to our Gazetteer entry for the Mosteller Cemetery
      • Note: The GPS coordinates that we are using for the Mosteller Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Mosteller Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Taylors had railroad service and no post office.

These communities are listed based on their distance from Taylors, with the one closest to Taylors listed first.

  • Taylors [Greenville County]
    • Jump to our Gazetteer entry for Taylors
    • Taylors [Greenville County] lies less than 2 miles<1> to the southeast of Taylors
    • From the 1895 Rand McNally Atlas, Taylors had railroad service and no post office
    • Jump to Google Maps centered on Taylors
    • Jump to TripAdvisor's Tourism page for Taylors<3>
  • Chick Springs [Greenville County]
    • Jump to our Gazetteer entry for Chick Springs
    • Chick Springs [Greenville County] lies less than 2 miles<1> to the east of Taylors
    • According to the 1895 Rand McNally Atlas, the estimated population in 1895: 42 people
    • From the 1895 Atlas, Chick Springs had a post office and no railroad service
    • Note: The GPS coordinates that we are using for Chick Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Chick Springs
  • Fairview [Greenville County]
    • Jump to our Gazetteer entry for Fairview
    • Fairview [Greenville County] lies 2 miles [3.2 km]<1> to the northeast of Taylors
    • According to the 1895 Rand McNally Atlas, the estimated population in 1895: 71 people
    • From the 1895 Atlas, Fairview had a post office and no railroad service
    • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Fairview
  • Greer [Greenville County]
    • Jump to our Gazetteer entry for Greer
    • Greer [Greenville County] lies 4 miles [6.4 km]<1> to the east of Taylors
    • Population from the 2020 Census: 35,316 people
    • From the 1895 Rand McNally Atlas, Greer had a post office and railroad service
    • Jump to Google Maps centered on Greer
    • Jump to TripAdvisor's Tourism page for Greer<3>
  • Sandy Flat [Greenville County]
    • Jump to our Gazetteer entry for Sandy Flat
    • Sandy Flat [Greenville County] lies 5 miles [8 km]<1> to the northwest of Taylors
    • According to the 1895 Rand McNally Atlas, the estimated population in 1895: 55 people
    • From the 1895 Atlas, Sandy Flat had a post office and no railroad service
    • Note: The GPS coordinates that we are using for Sandy Flat have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Sandy Flat
  • Batesville [Greenville County]
    • Jump to our Gazetteer entry for Batesville
    • Batesville [Greenville County] lies 6 miles [9.7 km]<1> to the southeast of Taylors
    • According to the 1895 Rand McNally Atlas, the estimated population in 1895: 50 people
    • From the 1895 Atlas, Batesville had a post office and no railroad service
    • Note: The GPS coordinates that we are using for Batesville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to Google Maps centered on Batesville
  • Continue List ...
    • Pelham [Greenville County]
      • Jump to our Gazetteer entry for Pelham
      • Pelham [Greenville County] lies 6 miles [9.7 km]<1> to the southeast of Taylors
      • From the 1895 Rand McNally Atlas, Pelham had a post office and no railroad service
      • Note: The GPS coordinates that we are using for Pelham have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on Pelham
    • O'Neal [Greenville County]
      • Jump to our Gazetteer entry for O'Neal
      • O'Neal [Greenville County] lies 6 miles [9.7 km]<1> to the north of Taylors
      • From the 1895 Rand McNally Atlas, O'Neal had a post office and no railroad service
      • Note: The GPS coordinates that we are using for O'Neal have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on O'Neal
    • Greenville [Greenville County]
      • Jump to our Gazetteer entry for Greenville
      • Greenville [Greenville County] lies 7 miles [11.3 km]<1> to the southwest of Taylors
      • According to the 1895 Rand McNally Atlas, the estimated population in 1895: 8,607 people
      • Population from the 2020 Census: 72,227 people
      • From the 1895 Atlas, Greenville had a post office and railroad service
      • Jump to Google Maps centered on Greenville
      • Jump to TripAdvisor's Tourism page for Greenville<3>
    • Duncan [Spartanburg County]
      • Jump to our Gazetteer entry for Duncan
      • Duncan [Spartanburg County] lies 8 miles [12.9 km]<1> to the east of Taylors
      • According to the 1895 Rand McNally Atlas, the estimated population in 1895: 153 people
      • Population from the 2020 Census: 3,715 people
      • From the 1895 Atlas, Duncan had a post office and railroad service
      • Jump to Google Maps centered on Duncan
      • Jump to TripAdvisor's Tourism page for Duncan<3>
    • Travelers Rest [Greenville County]
      • Jump to our Gazetteer entry for Travelers Rest
      • Travelers Rest [Greenville County] lies 8 miles [12.9 km]<1> to the west of Taylors
      • According to the 1895 Rand McNally Atlas, the estimated population in 1895: 29 people
      • Population from the 2020 Census: 8,202 people
      • From the 1895 Atlas, Travelers Rest had a post office and no railroad service
      • Jump to Google Maps centered on Travelers Rest
      • Jump to TripAdvisor's Tourism page for Travelers Rest<3>
    • Mauldin [Greenville County]
      • Jump to our Gazetteer entry for Mauldin
      • Mauldin [Greenville County] lies 9 miles [14.5 km]<1> to the south of Taylors
      • Population from the 2020 Census: 25,562 people
      • From the 1895 Rand McNally Atlas, Mauldin had a post office and railroad service
      • Jump to Google Maps centered on Mauldin
      • Jump to TripAdvisor's Tourism page for Mauldin<3>
    • Mitchell [Greenville County] - Historic
      • While Mitchell was mentioned in the 1895 Rand McNally Atlas, it no longer exists
      • Jump to our Gazetteer entry for Mitchell
      • Mitchell [Greenville County] was located 9 miles [14.5 km]<1> to the north of Taylors
      • From the 1895 Atlas, Mitchell had a post office and no railroad service
      • Note: The GPS coordinates that we are using for Mitchell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Taho [Greenville County] - Historic
      • While Taho was mentioned in the 1895 Rand McNally Atlas, it no longer exists
      • Jump to our Gazetteer entry for Taho
      • Taho [Greenville County] was located 9 miles [14.5 km]<1> to the north of Taylors
      • From the 1895 Atlas, Taho had a post office and no railroad service
      • Note: The GPS coordinates that we are using for Taho have been provided by the GNIS.<2> The coordinates still need to be verified.
    • White Horse [Greenville County]
      • Jump to our Gazetteer entry for White Horse
      • White Horse [Greenville County] lies 10 miles [16.1 km]<1> to the southwest of Taylors
      • From the 1895 Rand McNally Atlas, White Horse had a post office and no railroad service
      • Note: The GPS coordinates that we are using for White Horse have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to Google Maps centered on White Horse

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Taylors. See our List of 1890's Communities around Taylors.

Miscellaneous References and Mentions for Taylors ...

While our initial data about Taylors came from various goverment sources, we have found mention of Taylors in old books and maps. When we do, we'll find a fact here or a snippet there. We've created the following list to keep track of the documents we found useful in adding to our knowledge about Taylors.

We hope that the following list of documents will be of interest to you.

Business Atlas and Shippers' Guide (1895)
Published by Rand McNally & Co.
(Document found on Google Books)

Note for Taylors:
Services available in 1895: had a Railroad Station, Express Office, no Post Office mentioned

Rand McNally Map of South Carolina (1911)
Published by Rand McNally & Co.

Shell Oil Road Map for South Carolina (1956)
Published by Shell Oil Company

Both the GNIS and FIPS databases contain entries for Taylors. See our Misc Page for Taylors for more information.

Other Roadside Stops ...

Visit our Community Index for South Carolina

About Greenville County

About South Carolina

Off-the-Road Links ...

Unfortunately, we don't know of a website for Taylors. If you can help, please contact us through our Feedback Page.

The official website for Greenville County: www.greenvillecounty.org/

The official website for State of South Carolina: https://sc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Taylors) to Point B.If you need the driving distance, we recommend that you use one of the Mapping Services listed on our Map Page for Taylors. Since we usually use Google Maps, we've provided the following link: Google Map and Driving Directions starting from TaylorsOur distance measurements begin at a specific point in Taylors. The point we use is located at these GPS coordinates - Latitude: 34.9199, Longitude: -82.3017    
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we have found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Taylors, please let us know so that we can improve our accuracy.






















 

 

 

 

 


Home
Page
Sitemap Privacy
Statement
Terms
of Use
Feedback

 

 

Copyright 2020
All Rights Reserved

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

This page was last modified: 18 Apr 2022