RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Carolina >> Spartanburg County >> Sigsbee >> Nearby Communities - 1890sIndex...

Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Sigsbee in the Atlas, the following communities of the 1890's would have been found near the current location of Sigsbee. The following communities are listed based on their distance, with the one closest to Sigsbee listed first.

  • Mount Zion
    (2 miles [3.2 km] to the west)
    • Mount Zion is located in Spartanburg County
    • Jump to our Gazetteer entry for Mount Zion
  • Fairforest
    (2 miles [3.2 km] to the south)
  • Spartanburg
    (4 miles [6.4 km] to the southeast)
  • Whitney
    (4 miles [6.4 km] to the east)
    • Whitney is located in Spartanburg County
    • Jump to our Gazetteer entry for Whitney
  • Campton
    (4 miles [6.4 km] to the northwest)
    • Campton is located in Spartanburg County
    • Jump to our Gazetteer entry for Campton
  • Wellford
    (6 miles [9.7 km] to the southwest)
  • Inman
    (6 miles [9.7 km] to the northwest)
    • Inman is located in Spartanburg County
    • Jump to our Gazetteer entry for Inman
    • Population from the 2020 Census: 2,480 people
    • Jump to TripAdvisor's Tourism page for Inman <2>
  • Duncan
    (8 miles [12.9 km] to the southwest)
    • Duncan is located in Spartanburg County
    • Jump to our Gazetteer entry for Duncan
    • Population from the 2020 Census: 3,715 people
    • Jump to TripAdvisor's Tourism page for Duncan <2>
  • Converse
    (9 miles [14.5 km] to the east)
  • New Prospect
    (10 miles [16.1 km] to the north)
    • New Prospect is located in Spartanburg County
    • Jump to our Gazetteer entry for New Prospect
  • Reidville
    (10 miles [16.1 km] to the southwest)
  • Moore
    (10 miles [16.1 km] to the south)
  • Glendale
    (10 miles [16.1 km] to the east)
  • Clifton
    (10 miles [16.1 km] to the east)
  • Fingerville
    (10 miles [16.1 km] to the north)
  • Golightly
    (11 miles [17.7 km] to the southeast)
    • Golightly is located in Spartanburg County
    • Jump to our Gazetteer entry for Golightly
  • Cowpens
    (11 miles [17.7 km] to the east)
    • Cowpens is located in Spartanburg County
    • Jump to our Gazetteer entry for Cowpens
    • Population from the 2020 Census: 2,465 people
    • Jump to TripAdvisor's Tourism page for Cowpens <2>
  • Campobello
    (11 miles [17.7 km] to the northwest)
  • Greer
    (12 miles [19.3 km] to the west)
    • Greer is located in Greenville County
    • Jump to our Gazetteer entry for Greer
    • Population from the 2020 Census: 35,316 people
    • Jump to TripAdvisor's Tourism page for Greer <2>
  • Switzer
    (12 miles [19.3 km] to the south)
    • Switzer is located in Spartanburg County
    • Jump to our Gazetteer entry for Switzer
  • Andover ‑ Historic
    (12 miles [19.3 km] to the northwest)
    • Andover is located in Spartanburg County
    • Jump to our Gazetteer entry for Andover
  • Cashville
    (14 miles [22.5 km] to the southwest)
    • Cashville is located in Spartanburg County
    • Jump to our Gazetteer entry for Cashville
  • Walnut Grove
    (14 miles [22.5 km] to the southeast)
    • Walnut Grove is located in Spartanburg County
    • Jump to our Gazetteer entry for Walnut Grove
  • Brooklyn
    (14 miles [22.5 km] to the north)
    • Brooklyn is located in Spartanburg County
    • Jump to our Gazetteer entry for Brooklyn
  • Fairview
    (15 miles [24.1 km] to the west)
    • Fairview is located in Greenville County
    • Jump to our Gazetteer entry for Fairview
  • Pelham
    (15 miles [24.1 km] to the southwest)
    • Pelham is located in Greenville County
    • Jump to our Gazetteer entry for Pelham
  • Batesville
    (15 miles [24.1 km] to the southwest)
    • Batesville is located in Greenville County
    • Jump to our Gazetteer entry for Batesville
  • Glenn Springs
    (15 miles [24.1 km] to the southeast)
    • Glenn Springs is located in Spartanburg County
    • Jump to our Gazetteer entry for Glenn Springs
  • Pacolet
    (15 miles [24.1 km] to the southeast)
    • Pacolet is located in Spartanburg County
    • Jump to our Gazetteer entry for Pacolet
    • Population from the 2020 Census: 2,604 people
    • Jump to TripAdvisor's Tourism page for Pacolet <2>
  • Sandy Springs
    (15 miles [24.1 km] to the north)
    • Sandy Springs is located in Polk County (NC)
    • Jump to our Gazetteer entry for Sandy Springs
  • Gowensville
    (15 miles [24.1 km] to the northwest)
    • Gowensville is located in Greenville County
    • Jump to our Gazetteer entry for Gowensville
  • Tyger ‑ Historic
    (15 miles [24.1 km] to the northwest)
    • Tyger is located in Greenville County
    • Jump to our Gazetteer entry for Tyger
  • Mitchell ‑ Historic
    (15 miles [24.1 km] to the west)
    • Mitchell is located in Greenville County
    • Jump to our Gazetteer entry for Mitchell
  • O'Neal
    (15 miles [24.1 km] to the west)
    • O'Neal is located in Greenville County
    • Jump to our Gazetteer entry for O'Neal

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sigsbee, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.