|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pisgah Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pisgah Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pisgah Cemetery. We've listed the following communities based on their distance, with the closest first.
- Fork Shoals
(Less than 2 miles to the west)
- Note: We haven't been able to verify our GPS coordinates for Fork Shoals. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Fork Shoals
- Fork Shoals is located in Greenville County
- Lickville
(2 miles [3.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Lickville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lickville
- Lickville is located in Greenville County
- Green Pond
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Green Pond
- Green Pond is located in Laurens County
- Fountain Inn
(6 miles [9.7 km] to the northeast)
- Simpsonville
(7 miles [11.3 km] to the north)
- Princeton
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Princeton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Princeton
- Princeton is located in Laurens County
- Gray Court
(9 miles [14.5 km] to the east)
- Pelzer
(9 miles [14.5 km] to the west)
- Conestee
(10 miles [16.1 km] to the north)
- Woodland Village
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Woodland Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodland Village
- Woodland Village is located in Greenville County
- Mauldin
(10 miles [16.1 km] to the north)
- West Pelzer
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for West Pelzer have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Pelzer
- West Pelzer is located in Anderson County
- Population from the 2020 Census: 953 people
- Williamston
(10 miles [16.1 km] to the west)
- Golden Grove
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Golden Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Golden Grove
- Golden Grove is located in Greenville County
- Piedmont
(11 miles [17.7 km] to the northwest)
- Five Forks
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Five Forks have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Five Forks
- Five Forks is located in Greenville County
- Belton
(13 miles [20.9 km] to the southwest)
- Honea Path
(13 miles [20.9 km] to the southwest)
- Pine Hill Village
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Pine Hill Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Hill Village
- Pine Hill Village is located in Greenville County
- Gantt
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Gantt. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gantt
- Gantt is located in Greenville County
- Simpson ‑ Historic
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Simpson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Simpson
- Simpson is located in Laurens County
- Crescent
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Crescent
- Crescent is located in Spartanburg County
- Ware Shoals
(15 miles [24.1 km] to the south)
- Ekom
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Ekom
- Ekom is located in Laurens County
- Dunean
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Dunean have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunean
- Dunean is located in Greenville County
- White Horse
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for White Horse. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for White Horse
- White Horse is located in Greenville County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pisgah Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.6279, Longitude: -82.2862 In this case, the coordinates for the Pisgah Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|