|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Old Unity Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Old Unity Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Old Unity Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Fort Mill
(Less than 2 miles to the west)
- Riverview
(2 miles [3.2 km] to the west)
- Note: The GPS coordinates that we are using for Riverview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverview
- Riverview is located in York County
- Camp Cox
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for Camp Cox
- Camp Cox is located in Lancaster County
- Indian Land
(4 miles [6.4 km] to the east)
- Colonial Village
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Village
- Colonial Village is located in Lancaster County
- India Hook
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for India Hook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for India Hook
- India Hook is located in York County
- Pineville
(5 miles [8 km] to the northeast)
- Tega Cay
(5 miles [8 km] to the west)
- Marvin
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Marvin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marvin
- Marvin is located in Union County (NC)
- Population from the 2020 Census: 6,920 people
- Rock Hill
(7 miles [11.3 km] to the southwest)
- Lesslie
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Lesslie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lesslie
- Lesslie is located in York County
- Roddey
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Roddey
- Roddey is located in York County
- Roddey has also been known as:
- Coates Tavern
- Lake Wylie
(9 miles [14.5 km] to the northwest)
- Newport
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Newport
- Newport is located in York County
- Catawba
(10 miles [16.1 km] to the south)
- Van Wyck
(11 miles [17.7 km] to the southeast)
- Weddington
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Weddington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weddington
- Weddington is located in Mecklenburg County (NC)
- Population from the 2020 Census: 11,389 people
- Jump to TripAdvisor's Tourism page for Weddington <2>
- White Oak
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for White Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Union County (NC)
- Providence ‑ Historic
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Providence
- Providence is located in Mecklenburg County (NC)
- Yorkmont
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Yorkmont
- Yorkmont is located in Mecklenburg County (NC)
- Waxhaw
(12 miles [19.3 km] to the southeast)
- Wesley Chapel
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Wesley Chapel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wesley Chapel
- Wesley Chapel is located in Union County (NC)
- Population from the 2020 Census: 9,476 people
- Jump to TripAdvisor's Tourism page for Wesley Chapel <2>
- Dalton Village
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Dalton Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dalton Village
- Dalton Village is located in Mecklenburg County (NC)
- Edgemoor
(14 miles [22.5 km] to the south)
- Jaars
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Jaars have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jaars
- Jaars is located in Union County (NC)
- Matthews
(14 miles [22.5 km] to the northeast)
- Wilmore
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Wilmore
- Wilmore is located in Mecklenburg County (NC)
- Pinecrest
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Pinecrest
- Pinecrest is located in Mecklenburg County (NC)
Off-the-Road Links ...
The official website for York County: www.yorkcountygov.com/ The official website for State of South Carolina: https://sc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Old Unity Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.0091, Longitude: -80.9368 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|