Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Jersey Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Jersey Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Jersey Cemetery. We've listed the following communities based on their distance, with the closest first.

Laurens
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for Laurens
- Laurens is located in Laurens County
- Population from the 2020 Census: 8,852 people
- Jump to TripAdvisor's Tourism page for Laurens <2>
Lisbon ‑ Historic
(4 miles [6.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Lisbon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lisbon
- Lisbon is located in Laurens County
Cold Point
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for Cold Point
- Cold Point is located in Laurens County
Simpson ‑ Historic
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Simpson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Simpson
- Simpson is located in Laurens County
Clinton
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Clinton
- Clinton is located in Laurens County
- Population from the 2020 Census: 8,304 people
- Jump to TripAdvisor's Tourism page for Clinton <2>
Ekom
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Ekom
- Ekom is located in Laurens County
Tylersville
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Tylersville
- Tylersville is located in Laurens County
Waterloo
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Waterloo
- Waterloo is located in Laurens County
- Population from the 2020 Census: 170 people
- Jump to TripAdvisor's Tourism page for Waterloo <2>
Mountville
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Mountville
- Mountville is located in Laurens County
- Jump to TripAdvisor's Tourism page for Mountville <2>
Dover ‑ Historic
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Laurens County
Gray Court
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Gray Court
- Gray Court is located in Laurens County
- Population from the 2020 Census: 826 people
- Jump to TripAdvisor's Tourism page for Gray Court <2>
Enoree
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Enoree
- Enoree is located in Spartanburg County
- Jump to TripAdvisor's Tourism page for Enoree <2>
Mount Gallagher
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Mount Gallagher. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mount Gallagher
- Mount Gallagher is located in Laurens County
Cross Hill
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Cross Hill
- Cross Hill is located in Laurens County
- Population from the 2020 Census: 517 people
- Jump to TripAdvisor's Tourism page for Cross Hill <2>
Joanna
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Joanna
- Joanna is located in Laurens County
- Jump to TripAdvisor's Tourism page for Joanna <2>
Collins Lakeside Village
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Collins Lakeside Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collins Lakeside Village
- Collins Lakeside Village is located in Laurens County
Renno
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Renno
- Renno is located in Laurens County
Cross Anchor
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Cross Anchor
- Cross Anchor is located in Spartanburg County
- Jump to TripAdvisor's Tourism page for Cross Anchor <2>
Green Pond
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Green Pond
- Green Pond is located in Laurens County
Ware Shoals
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Ware Shoals
- Ware Shoals is located in Abbeville County
- Population from the 2020 Census: 2,152 people
- Jump to TripAdvisor's Tourism page for Ware Shoals <2>
Kinards
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Kinards
- Kinards is located in Laurens County
- Jump to TripAdvisor's Tourism page for Kinards <2>
Princeton
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Princeton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Princeton
- Princeton is located in Laurens County
Coronaca
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Coronaca have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coronaca
- Coronaca is located in Greenwood County
Cokesbury
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Cokesbury have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cokesbury
- Cokesbury is located in Greenwood County
Mudlick
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mudlick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mudlick
- Mudlick is located in Newberry County
Sedalia
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sedalia. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sedalia
- Sedalia is located in Union County
Fountain Inn
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Fountain Inn
- Fountain Inn is located in Greenville County
- Population from the 2020 Census: 10,905 people
- Jump to TripAdvisor's Tourism page for Fountain Inn <2>
Woodruff
(17 miles [27.4 km] to the north)
- Jump to our Gazetteer entry for Woodruff
- Woodruff is located in Spartanburg County
- Population from the 2020 Census: 4,507 people
- Jump to TripAdvisor's Tourism page for Woodruff <2>

Off-the-Road Links ...

The official website for Laurens County: www.laurenscountysc.org/

The official website for State of South Carolina: https://sc.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Jersey Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.4890, Longitude: -82.0070 In this case, the coordinates for the Jersey Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.