|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Eastview Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Eastview Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Eastview Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Edgefield
(Less than 2 miles to the west)
- Trenton
(5 miles [8 km] to the southeast)
- Johnston
(6 miles [9.7 km] to the east)
- Colliers
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Colliers
- Colliers is located in Edgefield County
- Ward
(11 miles [17.7 km] to the northeast)
- Murphys Estates
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Murphys Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murphys Estates
- Murphys Estates is located in Edgefield County
- Springdale
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Springdale
- Springdale is located in Aiken County
- Vaucluse
(13 miles [20.9 km] to the southeast)
- Ridge Spring
(14 miles [22.5 km] to the east)
- Saluda
(16 miles [25.7 km] to the northeast)
- Modoc
(17 miles [27.4 km] to the west)
- Clarks Hill
(17 miles [27.4 km] to the southwest)
- Graniteville
(17 miles [27.4 km] to the south)
- Warrenville
(17 miles [27.4 km] to the south)
- Monetta
(17 miles [27.4 km] to the east)
- Liberty Hill
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Liberty Hill
- Liberty Hill is located in McCormick County
- Parksville
(17 miles [27.4 km] to the west)
- Belvedere
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Belvedere have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belvedere
- Belvedere is located in Aiken County
- Burnettown
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Burnettown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burnettown
- Burnettown is located in Aiken County
- Population from the 2020 Census: 2,769 people
- Langley
(19 miles [30.6 km] to the south)
- Gloverville
(19 miles [30.6 km] to the south)
- Aiken
(19 miles [30.6 km] to the southeast)
- North Augusta
(20 miles [32.2 km] to the south)
- Clearwater
(20 miles [32.2 km] to the south)
- Bath
(20 miles [32.2 km] to the south)
- Plum Branch
(20 miles [32.2 km] to the west)
Off-the-Road Links ...
The official website for Edgefield County: www.edgefieldcounty.sc.gov/ The official website for State of South Carolina: https://sc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Eastview Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.7960, Longitude: -81.9101 In this case, the coordinates for the Eastview Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|