Welcome to Tri Mills ...
Tri Mills is located in Columbia County<1>.
A typical abbreviation for Tri Mills: Tri Mls. (or less commonly used: Tri Mlls.)
Tri Mills is 950 feet [290 m] above sea level.<2>.
Time Zone: Tri Mills lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Tri Mills: 570 & 272<3>
Communities near Tri Mills ...
We have created a list of 10 communities that are near Tri Mills.
- Bloomsburg
(18 miles [29 km] to the south)
- Nanticoke
(18 miles [29 km] to the east)
- Berwick
(15 miles [24.1 km] to the southeast)
- Harveys Lake
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Harveys Lake have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harveys Lake
- Harveys Lake is located in Luzerne County
- Population from the 2020 Census: 2,812 people
- Jump to TripAdvisor's Tourism page for Harveys Lake <4>
- Nescopeck
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Nescopeck have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nescopeck
- Nescopeck is located in Luzerne County
- Population from the 2020 Census: 1,522 people
- Jump to TripAdvisor's Tourism page for Nescopeck <4>
- Millville
(13 miles [20.9 km] to the southwest)
- Shickshinny
(12 miles [19.3 km] to the southeast)
- Benton
(4 miles [6.4 km] to the southwest)
- Briar Creek
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Briar Creek
- Briar Creek is located in Columbia County
- Population from the 2020 Census: 672 people
- Dushore
(18 miles [29 km] to the north)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Tri Mills. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Tri Mills.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Tri Mills. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Tri Mills.
We also have a detailed list of newspapers that have been published in the area around Tri Mills. See our Newspapers Page for Tri Mills.
TripAdvisor Tourism Pages for Tri Mills ...
Looking for more information about Tri Mills? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Tri Mills, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Tri Mills.
Footnotes ...
<1> | If you're interested in how the shape of Pennsylvania's counties, including Columbia, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<2> | The elevation is an estimate for the area around Tri Mills - it will be higher in some places and lower in others. |
<3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 570 code has been Overlayed with the 272 area code. New phone numbers in the Tri Mills area will be assigned with one of these codes: 570 or 272. As a result, placing a call in the Tri Mills area will require 10-digit dialing (where you enter both the area code and then the phone number). |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |