Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Tamarack in the Atlas, the following communities of the 1890's would have been found near the current location of Tamarack. The following communities are listed based on their distance, with the one closest to Tamarack listed first.
- Hammersley Fork
(3 miles [4.8 km] to the west)
- Hammersley Fork is located in Clinton County
- Jump to our Gazetteer entry for Hammersley Fork
- Cross Fork
(4 miles [6.4 km] to the northeast)
- Bitumen
(8 miles [12.9 km] to the south)
- Bitumen is located in Clinton County
- Jump to our Gazetteer entry for Bitumen
- Westport
(8 miles [12.9 km] to the south)
- Shintown
(8 miles [12.9 km] to the south)
- Shintown is located in Clinton County
- Jump to our Gazetteer entry for Shintown
- Renovo
(8 miles [12.9 km] to the southeast)
- North Bend
(9 miles [14.5 km] to the southeast)
- Cooks Run
(10 miles [16.1 km] to the south)
- Cooks Run is located in Clinton County
- Jump to our Gazetteer entry for Cooks Run
- Logue
(10 miles [16.1 km] to the northwest)
- Logue is located in Potter County
- Jump to our Gazetteer entry for Logue
- First Fork
(10 miles [16.1 km] to the west)
- First Fork is located in Cameron County
- Jump to our Gazetteer entry for First Fork
- Keating
(11 miles [17.7 km] to the south)
- Keating is located in Clinton County
- Jump to our Gazetteer entry for Keating
- Oleona
(11 miles [17.7 km] to the northeast)
- Oleona is located in Potter County
- Jump to our Gazetteer entry for Oleona
- Wharton
(11 miles [17.7 km] to the northwest)
- Wharton is located in Potter County
- Jump to our Gazetteer entry for Wharton
- Hyner
(12 miles [19.3 km] to the southeast)
- Hyner is located in Clinton County
- Jump to our Gazetteer entry for Hyner
- Conrad
(12 miles [19.3 km] to the north)
- Conrad is located in Potter County
- Jump to our Gazetteer entry for Conrad
- Wyside
(14 miles [22.5 km] to the southwest)
- Wyside is located in Cameron County
- Jump to our Gazetteer entry for Wyside
- Driftwood
(15 miles [24.1 km] to the west)
- Ritchie
(15 miles [24.1 km] to the southeast)
- Ritchie is located in Clinton County
- Jump to our Gazetteer entry for Ritchie
- Costello
(15 miles [24.1 km] to the northwest)
- Costello is located in Potter County
- Jump to our Gazetteer entry for Costello
- Huntley
(16 miles [25.7 km] to the west)
- Huntley is located in Cameron County
- Jump to our Gazetteer entry for Huntley
- Glen Union
(17 miles [27.4 km] to the southeast)
- Glen Union is located in Clinton County
- Jump to our Gazetteer entry for Glen Union
- Whetham
(17 miles [27.4 km] to the southeast)
- Whetham is located in Clinton County
- Jump to our Gazetteer entry for Whetham
- Cameron
(17 miles [27.4 km] to the west)
- Cameron is located in Cameron County
- Jump to our Gazetteer entry for Cameron
- Mix Run
(18 miles [29 km] to the west)
- Mix Run is located in Cameron County
- Jump to our Gazetteer entry for Mix Run
- Slate Run
(18 miles [29 km] to the east)
- Hilborn
(18 miles [29 km] to the east)
- Hilborn is located in Lycoming County
- Jump to our Gazetteer entry for Hilborn
- Germania
(18 miles [29 km] to the northeast)
- Germania is located in Potter County
- Jump to our Gazetteer entry for Germania
- Sterling Run
(18 miles [29 km] to the west)
- Sterling Run is located in Cameron County
- Jump to our Gazetteer entry for Sterling Run
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tamarack, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |