Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Stronach in the Atlas, the following communities of the 1890's would have been found near the current location of Stronach. The following communities are listed based on their distance, with the one closest to Stronach listed first.
- Lumber City
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Lumber City. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lumber City
- Lumber City is located in Clearfield County
- Estimated population in 2015: 75 people
- Curwensville
(3 miles [4.8 km] to the east)
- Bells Landing
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Bells Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bells Landing
- Bells Landing is located in Clearfield County
- Bloomington
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Bloomington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomington
- Bloomington is located in Clearfield County
- Curry Run
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for Curry Run
- Curry Run is located in Clearfield County
- Kerrmoor
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Kerrmoor have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kerrmoor
- Kerrmoor is located in Clearfield County
- New Millport
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for New Millport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Millport
- New Millport is located in Clearfield County
- Olanta
(5 miles [8 km] to the southeast)
- Glen Richey
(5 miles [8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Glen Richey. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Glen Richey
- Glen Richey is located in Clearfield County
- Bower
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Bower have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bower
- Bower is located in Clearfield County
- Gazzam
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Gazzam. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gazzam
- Gazzam is located in Clearfield County
- Oshanter
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Oshanter have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oshanter
- Oshanter is located in Clearfield County
- Marron
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Marron have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marron
- Marron is located in Clearfield County
- Riverview
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Riverview have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverview
- Riverview is located in Clearfield County
- Ansonville
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Ansonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ansonville
- Ansonville is located in Clearfield County
- Rockton
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Rockton
- Rockton is located in Clearfield County
- Clearfield
(8 miles [12.9 km] to the northeast)
- Mahaffey
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Mahaffey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mahaffey
- Mahaffey is located in Clearfield County
- Population from the 2020 Census: 348 people
- Jump to TripAdvisor's Tourism page for Mahaffey <3>
- Ostend
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Ostend have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ostend
- Ostend is located in Clearfield County
- Newburg
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Newburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newburg
- Newburg is located in Clearfield County
- Population from the 2020 Census: 94 people
- Mayes
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Mayes have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mayes
- Mayes is located in Clearfield County
- Leonard
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Leonard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leonard
- Leonard is located in Clearfield County
- Luthersburg
(9 miles [14.5 km] to the northwest)
- McGees Mills
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for McGees Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McGees Mills
- McGees Mills is located in Clearfield County
- Berwinsdale
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Berwinsdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berwinsdale
- Berwinsdale is located in Clearfield County
- Clearfield Junction
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Clearfield Junction have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clearfield Junction
- Clearfield Junction is located in Clearfield County
Off-the-Road Links ...
The official website for Clearfield County: www.clearfieldco.org/
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Stronach, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |