Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Shadle had a post office and no railroad service.
The following communities are listed based on their distance from Shadle, with the one closest to Shadle listed first.
- Aline
(Less than 2 miles to the south)
- Mount Pleasant Mills
(Less than 2 miles to the northwest)
- Strouptown
(2 miles [3.2 km] to the west)
- Note: The GPS coordinates that we are using for Strouptown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Strouptown
- Strouptown is located in Snyder County
- Meiserville
(2 miles [3.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Meiserville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meiserville
- Meiserville is located in Snyder County
- Pallas
(2 miles [3.2 km] to the east)
- Hoffer
(3 miles [4.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hoffer. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hoffer
- Hoffer is located in Snyder County
- Google driving directions:
- From your current location to Hoffer
- From Shadle to Hoffer
- Oriental
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Oriental have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oriental
- Oriental is located in Juniata County
- McKees Half Falls
(4 miles [6.4 km] to the southeast)
- Knousetown
(5 miles [8 km] to the southwest)
- Dalmatia
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Dalmatia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dalmatia
- Dalmatia is located in Northumberland County
- Jump to TripAdvisor's Tourism page for Dalmatia <2>
- Chapman
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Chapman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapman
- Chapman is located in Snyder County
- Verdilla
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Verdilla have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Verdilla
- Verdilla is located in Snyder County
- Middleburg
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Snyder County
- Population from the 2020 Census: 1,262 people
- Jump to TripAdvisor's Tourism page for Middleburg <2>
- Port Trevorton
(6 miles [9.7 km] to the east)
- Kantz
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Kantz have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kantz
- Kantz is located in Snyder County
- Kreamer
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Kreamer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kreamer
- Kreamer is located in Snyder County
- Jump to TripAdvisor's Tourism page for Kreamer <2>
- Globe Mills
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Globe Mills. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Globe Mills
- Globe Mills is located in Snyder County
- Google driving directions:
- From your current location to Globe Mills
- From Shadle to Globe Mills
- Paxtonville
(6 miles [9.7 km] to the northwest)
- Richfield
(6 miles [9.7 km] to the west)
- Malta
(7 miles [11.3 km] to the southeast)
- Hickory Corners
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Hickory Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickory Corners
- Hickory Corners is located in Northumberland County
- Dundore
(7 miles [11.3 km] to the east)
- Pfoutz Valley
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Pfoutz Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pfoutz Valley
- Pfoutz Valley is located in Perry County
- Paxton
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Paxton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Paxton
- Paxton is located in Dauphin County
- Google driving directions:
- From your current location to Paxton
- From Shadle to Paxton
- Mandata
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Mandata. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mandata
- Mandata is located in Northumberland County
- Google driving directions:
- From your current location to Mandata
- From Shadle to Mandata
- Herndon
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Herndon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Herndon
- Herndon is located in Northumberland County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Herndon <2>
- Fishers Ferry
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Fishers Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fishers Ferry
- Fishers Ferry is located in Northumberland County
- Salem
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Snyder County
Off-the-Road Links ...
The official website for Snyder County: www.snydercounty.org/
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Shadle, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |