Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Rupert (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Rupert. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Rupert is located in Columbia County.
To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Columbia County: Luzerne, Lycoming, Montour, Northumberland, Schuylkill & Sullivan.
Below are the counties that are near Rupert. For each of these counties, we show a sample of those communities that are closest to Rupert:
- Columbia County (The home county of Rupert)
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Fernville
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Fernville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fernville
- Fernville is located in Columbia County
- Bloomsburg
(Less than 2 miles to the northeast)
- Buckhorn
(2 miles [3.2 km] to the northwest)
- Catawissa
(2 miles [3.2 km] to the south)
- Grovania
(2 miles [3.2 km] to the west)
- Espy
(3 miles [4.8 km] to the northeast)
- Lightstreet
(4 miles [6.4 km] to the northeast)
- Queen City
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Queen City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queen City
- Queen City is located in Columbia County
- Mainville
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Mainville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mainville
- Mainville is located in Columbia County
- Almedia
(5 miles [8 km] to the northeast)
- Mordansville
(6 miles [9.7 km] to the north)
- Slabtown
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Slabtown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slabtown
- Slabtown is located in Columbia County
- Eyers Grove
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Eyers Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eyers Grove
- Eyers Grove is located in Columbia County
- Carbon County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Tresckow
(27 miles [43.5 km] to the east)
- Coxes Village
(28 miles [45.1 km] to the east)
- Dauphin County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Erdman
(25 miles [40.2 km] to the southwest)
- Williamstown
(28 miles [45.1 km] to the south)
- Gratz
(28 miles [45.1 km] to the southwest)
- Dayton
(29 miles [46.7 km] to the south)
- Pillow
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Pillow have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pillow
- Pillow is located in Dauphin County
- Population from the 2020 Census: 297 people
- Jump to TripAdvisor's Tourism page for Pillow <2>
- Lykens
(30 miles [48.3 km] to the south)
- Luzerne County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Mountain Grove
(13 miles [20.9 km] to the east)
- Nescopeck
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Nescopeck have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nescopeck
- Nescopeck is located in Luzerne County
- Population from the 2020 Census: 1,522 people
- Jump to TripAdvisor's Tourism page for Nescopeck <2>
- East Berwick
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for East Berwick have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Berwick
- East Berwick is located in Luzerne County
- Beach Haven
(16 miles [25.7 km] to the east)
- New Columbus
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for New Columbus have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Columbus
- New Columbus is located in Luzerne County
- Population from the 2020 Census: 227 people
- Waterton
(17 miles [27.4 km] to the northeast)
- Register
(18 miles [29 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Register. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Register
- Register is located in Luzerne County
- Google driving directions:
- From your current location to Register
- From Rupert to Register
- Tomhicken
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Tomhicken. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tomhicken
- Tomhicken is located in Luzerne County
- Google driving directions:
- From your current location to Tomhicken
- From Rupert to Tomhicken
- Clarks View
(19 miles [30.6 km] to the northeast)
- Huntington Mills
(19 miles [30.6 km] to the northeast)
- Fairmount Springs
(20 miles [32.2 km] to the northeast)
- Harveyville
(20 miles [32.2 km] to the northeast)
- Shickshinny
(20 miles [32.2 km] to the northeast)
- Lycoming County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Unityville
(17 miles [27.4 km] to the north)
- Richarts Grove
(18 miles [29 km] to the north)
- Lairdsville
(18 miles [29 km] to the northwest)
- Biggerstown
(19 miles [30.6 km] to the north)
- Lungerville
(20 miles [32.2 km] to the north)
- Muncy
(22 miles [35.4 km] to the northwest)
- Muncy
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Muncy came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Muncy
- Muncy is located in Lycoming County
- Population from the 2020 Census: 1,191 people
- Maple Hill
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Maple Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Maple Hill
- Maple Hill is located in Lycoming County
- Google driving directions:
- From your current location to Maple Hill
- From Rupert to Maple Hill
- Montoursville
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Montoursville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montoursville
- Montoursville is located in Lycoming County
- Population from the 2020 Census: 4,393 people
- Jump to TripAdvisor's Tourism page for Montoursville <2>
- Montour County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Mechanicsville
(5 miles [8 km] to the west)
- Danville
(7 miles [11.3 km] to the west)
- Washingtonville
(11 miles [17.7 km] to the northwest)
- Mooresburg
(12 miles [19.3 km] to the west)
- Exchange
(14 miles [22.5 km] to the northwest)
- Northumberland County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Elysburg
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Elysburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elysburg
- Elysburg is located in Northumberland County
- Jump to TripAdvisor's Tourism page for Elysburg <2>
- Riverside
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Northumberland County
- Population from the 2020 Census: 1,839 people
- Jump to TripAdvisor's Tourism page for Riverside <2>
- Marion Heights
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Marion Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion Heights
- Marion Heights is located in Northumberland County
- Population from the 2020 Census: 573 people
- Rushtown
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rushtown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rushtown
- Rushtown is located in Northumberland County
- Google driving directions:
- From your current location to Rushtown
- From Rupert to Rushtown
- Bear Gap
(10 miles [16.1 km] to the south)
- Chulasky
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Chulasky. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Chulasky
- Chulasky is located in Northumberland County
- Google driving directions:
- From your current location to Chulasky
- From Rupert to Chulasky
- Kulpmont
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Kulpmont have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kulpmont
- Kulpmont is located in Northumberland County
- Population from the 2020 Census: 2,735 people
- Jump to TripAdvisor's Tourism page for Kulpmont <2>
- Natalie
(11 miles [17.7 km] to the south)
- Mount Carmel
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Mount Carmel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Carmel
- Mount Carmel is located in Northumberland County
- Population from the 2020 Census: 5,708 people
- Jump to TripAdvisor's Tourism page for Mount Carmel <2>
- Snydertown
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Snydertown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snydertown
- Snydertown is located in Northumberland County
- Population from the 2020 Census: 316 people
- Dooleyville
(13 miles [20.9 km] to the south)
- Marshallton
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Marshallton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshallton
- Marshallton is located in Northumberland County
- Edgewood
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Edgewood have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgewood
- Edgewood is located in Northumberland County
- Schuylkill County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Ferndale
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ferndale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ferndale
- Ferndale is located in Schuylkill County
- Google driving directions:
- From your current location to Ferndale
- From Rupert to Ferndale
- Zion Grove
(14 miles [22.5 km] to the east)
- Lavelle - Locustdale
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Lavelle - Locustdale
- Lavelle - Locustdale is located in Schuylkill County
- Lavelle
(15 miles [24.1 km] to the south)
- Ashland
(15 miles [24.1 km] to the southeast)
- Ringtown
(15 miles [24.1 km] to the southeast)
- Nuremberg
(16 miles [25.7 km] to the east)
- Fountain Springs
(16 miles [25.7 km] to the southeast)
- Girardville
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Girardville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Girardville
- Girardville is located in Schuylkill County
- Population from the 2020 Census: 1,434 people
- Jump to TripAdvisor's Tourism page for Girardville <2>
- Krebs
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Krebs. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Krebs
- Krebs is located in Schuylkill County
- Google driving directions:
- From your current location to Krebs
- From Rupert to Krebs
- Lost Creek
(16 miles [25.7 km] to the southeast)
- Raven Run
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Raven Run. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Raven Run
- Raven Run is located in Schuylkill County
- Google driving directions:
- From your current location to Raven Run
- From Rupert to Raven Run
- Gordon
(17 miles [27.4 km] to the southeast)
- Snyder County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Shamokin Dam
(20 miles [32.2 km] to the southwest)
- Hummels Wharf
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Hummels Wharf have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hummels Wharf
- Hummels Wharf is located in Snyder County
- Jump to TripAdvisor's Tourism page for Hummels Wharf <2>
- Selinsgrove
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Selinsgrove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selinsgrove
- Selinsgrove is located in Snyder County
- Population from the 2020 Census: 5,913 people
- Jump to TripAdvisor's Tourism page for Selinsgrove <2>
- Kratzerville
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Kratzerville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kratzerville
- Kratzerville is located in Snyder County
- Dundore
(26 miles [41.8 km] to the southwest)
- Port Trevorton
(27 miles [43.5 km] to the southwest)
- Freeburg
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Freeburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freeburg
- Freeburg is located in Snyder County
- Population from the 2020 Census: 566 people
- Kreamer
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Kreamer have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kreamer
- Kreamer is located in Snyder County
- Jump to TripAdvisor's Tourism page for Kreamer <2>
- Globe Mills
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Globe Mills. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Globe Mills
- Globe Mills is located in Snyder County
- Google driving directions:
- From your current location to Globe Mills
- From Rupert to Globe Mills
- Sullivan County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- Beech Glen
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Beech Glen. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Beech Glen
- Beech Glen is located in Sullivan County
- Google driving directions:
- From your current location to Beech Glen
- From Rupert to Beech Glen
- Long Brook
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Long Brook. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Long Brook
- Long Brook is located in Sullivan County
- Google driving directions:
- From your current location to Long Brook
- From Rupert to Long Brook
- Sonestown
(26 miles [41.8 km] to the north)
- Eagles Mere
(30 miles [48.3 km] to the north)
- Laporte
(30 miles [48.3 km] to the north)
- Union County
- The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
- New Columbia
(20 miles [32.2 km] to the west)
- West Milton
(20 miles [32.2 km] to the west)
- Lewisburg
(21 miles [33.8 km] to the west)
- Linntown
(22 miles [35.4 km] to the west)
- Allenwood
(23 miles [37 km] to the west)
- Dry Valley Crossroads
(23 miles [37 km] to the west)
- Alvira ‑ Historic
(27 miles [43.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Alvira. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Alvira
- Alvira is located in Union County
- Former name for Alvira:
- Wisetown
- Google driving directions:
- From your current location to Alvira
- From Rupert to Alvira
- New Berlin
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for New Berlin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Berlin
- New Berlin is located in Union County
- Estimated population in 2015: 867 people
- Jump to TripAdvisor's Tourism page for New Berlin <2>
- Mifflinburg
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Mifflinburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mifflinburg
- Mifflinburg is located in Union County
- Population from the 2020 Census: 3,445 people
- Jump to TripAdvisor's Tourism page for Mifflinburg <2>
- Red Bank
(30 miles [48.3 km] to the west)
For an expanded list of the communities that are closest to Rupert, see our County-by-County Page for Rupert.
Cemeteries Near Rupert ...
Below are cemeteries that are in the vicinity of Rupert.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Rupert covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Rupert, with the one closest to Rupert listed first.
- Rosemont Cemetery
(Less than 2 miles to the northeast)
- Hillside Cemetery
(2 miles [3.2 km] to the southeast)
- Mt. Zion Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Mt. Zion Cemetery
- Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Rosemont Cemetery
(3 miles [4.8 km] to the northeast)
- Creveling Cemetery
(4 miles [6.4 km] to the northeast)
- Sharp Ridge Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Sharp Ridge Cemetery
- Note: The GPS coordinates that we are using for the Sharp Ridge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Fisher Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Fisher Cemetery
- Note: The GPS coordinates that we are using for the Fisher Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Odd Fellows Cemetery
(6 miles [9.7 km] to the west)
- Our Lady of Mercy Cemetery
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for the Our Lady of Mercy Cemetery
- Note: The GPS coordinates that we are using for the Our Lady of Mercy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Roaring Creek Cemetery
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for the Roaring Creek Cemetery
- Note: The GPS coordinates that we are using for the Roaring Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Elan Memorial Park
(6 miles [9.7 km] to the northeast)
- Hidlay Cemetery
(6 miles [9.7 km] to the northeast)
- Continue List (183 more) ...
- Wilson Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Wilson Cemetery
- Note: The GPS coordinates that we are using for the Wilson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Laurel Hill Cemetery
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for the Laurel Hill Cemetery
- Note: The GPS coordinates that we are using for the Laurel Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- McHenry Cemetery
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for the McHenry Cemetery
- Note: The GPS coordinates that we are using for the McHenry Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<8>
The Rand McNally Atlas shows that Rupert had a population of 193 people in 1895 with a post office and railroad service.
These communities are listed based on their distance from Rupert, with the one closest to Rupert listed first.
- Bloomsburg
(Less than 2 miles to the northeast)
- Catawissa
(2 miles [3.2 km] to the south)
- Buckhorn
(2 miles [3.2 km] to the northwest)
- Espy
(3 miles [4.8 km] to the northeast)
- Paper Mill
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Paper Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paper Mill
- Paper Mill is located in Columbia County
- Lightstreet
(4 miles [6.4 km] to the northeast)
- Mainville
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Mainville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mainville
- Mainville is located in Columbia County
- Almedia
(5 miles [8 km] to the northeast)
- Mordansville
(6 miles [9.7 km] to the north)
- Boyd
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Boyd have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boyd
- Boyd is located in Northumberland County
- Union Corner
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Union Corner have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Corner
- Union Corner is located in Northumberland County
- Eyers Grove
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Eyers Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eyers Grove
- Eyers Grove is located in Columbia County
- Continue List (19 more) ...
- Numidia
(7 miles [11.3 km] to the southeast)
- Lime Ridge
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Lime Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lime Ridge
- Lime Ridge is located in Columbia County
- Orangeville
(7 miles [11.3 km] to the northeast)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Rupert. See our List of 1890's Communities around Rupert.
Newspapers Published in Rupert ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 47 newspapers that have been published in the area around Rupert.
Although we're unaware of any newspapers that were published in the immediate area of Rupert, there are papers which were published within 14 miles [22.5 km]<7>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Rupert.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Rupert:
- Websites specific to Pennsylvania
- Pages specific to Columbia County
- Genealogy information for nearby counties
- Carbon County
- Dauphin County
- Luzerne County
- Lycoming County
- Montour County
- Northumberland County
- Schuylkill County
- Snyder County
- Sullivan County
- Union County
- Cemetery Information and Directories for Pennsylvania
Off-the-Road Links ...
Unfortunately, we don't know of a website for Rupert. If you can help, please contact us through our Feedback Page.
The official website for Columbia County: www.columbiapa.org/county/
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | To help visualize the location of the cemetery, we've drawn a straight line between the communities of Espy and Almedia. The cemetery can be found near that line and roughly halfway between the two communities. Remember that this is just an approximate location. |
<7> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Rupert) to Point B.Our distance measurements begin at a specific point in Rupert. The point we use is located at these GPS coordinates - Latitude: 40.9806, Longitude: -76.4748 In this case, the coordinates for Rupert have been provided by the Geographic Names Information System (GNIS). |
<8> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rupert, please let us know so that we can improve our accuracy. |