|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Riverview in the Atlas, the following communities of the 1890's would have been found near the current location of Riverview. The following communities are listed based on their distance, with the one closest to Riverview listed first.
- Beaver Falls
(Less than 2 miles to the east)
- New Brighton
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for New Brighton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Brighton
- New Brighton is located in Beaver County
- Population from the 2020 Census: 5,622 people
- Jump to TripAdvisor's Tourism page for New Brighton <2>
- Kenwood
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Kenwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenwood
- Kenwood is located in Beaver County
- Fallston
(2 miles [3.2 km] to the southeast)
- Vanport
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Vanport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vanport
- Vanport is located in Beaver County
- Beaver
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Beaver have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaver
- Beaver is located in Beaver County
- Population from the 2020 Census: 4,222 people
- Jump to TripAdvisor's Tourism page for Beaver <2>
- Bridgewater
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for Bridgewater
- Bridgewater is located in Beaver County
- Population from the 2020 Census: 817 people
- Rochester
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Rochester have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rochester
- Rochester is located in Beaver County
- Population from the 2020 Census: 3,406 people
- Jump to TripAdvisor's Tourism page for Rochester <2>
- Thompson
(4 miles [6.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Thompson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Thompson
- Thompson is located in Beaver County
- Homewood
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Homewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homewood
- Homewood is located in Beaver County
- Population from the 2020 Census: 121 people
- Bellowsville
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Bellowsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellowsville
- Bellowsville is located in Beaver County
- Phillipsburg
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Phillipsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Phillipsburg
- Phillipsburg is located in Beaver County
- Monaca
(5 miles [8 km] to the southeast)
- Barrisville
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Barrisville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Barrisville
- Barrisville is located in Beaver County
- Bellton
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Bellton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellton
- Bellton is located in Beaver County
- Freedom
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Freedom have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freedom
- Freedom is located in Beaver County
- Population from the 2020 Census: 1,458 people
- Jump to TripAdvisor's Tourism page for Freedom <2>
- McKimm
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for McKimm have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McKimm
- McKimm is located in Beaver County
- New Galilee
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for New Galilee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Galilee
- New Galilee is located in Beaver County
- Population from the 2020 Census: 349 people
- North Sewickley
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for North Sewickley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Sewickley
- North Sewickley is located in Beaver County
- Darlington
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Darlington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Darlington
- Darlington is located in Beaver County
- Population from the 2020 Census: 234 people
- Jump to TripAdvisor's Tourism page for Darlington <2>
- Blackhawk
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Blackhawk have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blackhawk
- Blackhawk is located in Beaver County
- Ohioville
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Ohioville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ohioville
- Ohioville is located in Beaver County
- Population from the 2020 Census: 3,262 people
- Stobo
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Stobo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stobo
- Stobo is located in Beaver County
- Conway
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Conway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conway
- Conway is located in Beaver County
- Population from the 2020 Census: 2,047 people
- Jump to TripAdvisor's Tourism page for Conway <2>
- Fombell
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Fombell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fombell
- Fombell is located in Beaver County
- Goehring
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Goehring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goehring
- Goehring is located in Beaver County
- Lillyville
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Lillyville
- Lillyville is located in Beaver County
- Frisco
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Frisco. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Frisco
- Frisco is located in Beaver County
- Ellwood City
(7 miles [11.3 km] to the north)
- Rock Point
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Rock Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Point
- Rock Point is located in Lawrence County
Off-the-Road Links ...
The official website for Beaver County: www.co.beaver.pa.us/ The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Riverview, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|