Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Pleasant View Heights in the Atlas, the following communities of the 1890's would have been found near the current location of Pleasant View Heights. The following communities are listed based on their distance, with the one closest to Pleasant View Heights listed first.
- Scenery Hill
(Less than 2 miles to the southeast)
- Odell
(2 miles [3.2 km] to the northwest)
- Odell is located in Washington County
- Jump to our Gazetteer entry for Odell
- Vanceville
(3 miles [4.8 km] to the north)
- Vanceville is located in Washington County
- Jump to our Gazetteer entry for Vanceville
- Glyde
(3 miles [4.8 km] to the northwest)
- Glyde is located in Washington County
- Jump to our Gazetteer entry for Glyde
- Lone Pine
(4 miles [6.4 km] to the west)
- Lone Pine is located in Washington County
- Jump to our Gazetteer entry for Lone Pine
- Beallsville
(4 miles [6.4 km] to the south)
- Bakers
(5 miles [8 km] to the southwest)
- Bakers is located in Washington County
- Jump to our Gazetteer entry for Bakers
- Bissell
(5 miles [8 km] to the southwest)
- Bissell is located in Washington County
- Jump to our Gazetteer entry for Bissell
- South Strabane
(5 miles [8 km] to the northwest)
- South Strabane is located in Washington County
- Jump to our Gazetteer entry for South Strabane
- Ten Mile
(6 miles [9.7 km] to the southwest)
- Ten Mile is located in Washington County
- Jump to our Gazetteer entry for Ten Mile
- Deemston
(6 miles [9.7 km] to the southeast)
- Deemston is located in Washington County
- Jump to our Gazetteer entry for Deemston
- Population from the 2020 Census: 696 people
- Eighty Four
(6 miles [9.7 km] to the northwest)
- Kammerer
(6 miles [9.7 km] to the north)
- Kammerer is located in Washington County
- Jump to our Gazetteer entry for Kammerer
- Dunningsville
(6 miles [9.7 km] to the north)
- Dunningsville is located in Washington County
- Jump to our Gazetteer entry for Dunningsville
- Amity
(7 miles [11.3 km] to the southwest)
- Amity is located in Washington County
- Jump to our Gazetteer entry for Amity
- Castile
(7 miles [11.3 km] to the south)
- Castile is located in Greene County
- Jump to our Gazetteer entry for Castile
- Fredericktown
(7 miles [11.3 km] to the southeast)
- Wylandville
(7 miles [11.3 km] to the north)
- Wylandville is located in Washington County
- Jump to our Gazetteer entry for Wylandville
- Lover
(7 miles [11.3 km] to the east)
- Lover is located in Washington County
- Jump to our Gazetteer entry for Lover
- Zediker
(7 miles [11.3 km] to the northwest)
- Zediker is located in Washington County
- Jump to our Gazetteer entry for Zediker
- West Amity
(8 miles [12.9 km] to the southwest)
- West Amity is located in Washington County
- Jump to our Gazetteer entry for West Amity
- Hackney
(8 miles [12.9 km] to the southwest)
- Hackney is located in Washington County
- Jump to our Gazetteer entry for Hackney
- Clarksville
(8 miles [12.9 km] to the south)
- Millsboro
(8 miles [12.9 km] to the southeast)
- Laboratory
(8 miles [12.9 km] to the northwest)
- Laboratory is located in Washington County
- Jump to our Gazetteer entry for Laboratory
- Braddock
(8 miles [12.9 km] to the northwest)
- Braddock is located in Washington County
- Jump to our Gazetteer entry for Braddock
- Vankirk
(8 miles [12.9 km] to the west)
- Vankirk is located in Washington County
- Jump to our Gazetteer entry for Vankirk
- McCracken
(8 miles [12.9 km] to the west)
- McCracken is located in Washington County
- Jump to our Gazetteer entry for McCracken
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Pleasant View Heights, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |