Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Hyner had a population of 219 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Hyner, with the one closest to Hyner listed first.
- Ritchie
(2 miles [3.2 km] to the southeast)
- Ritchie is located in Clinton County
- Jump to our Gazetteer entry for Ritchie
- North Bend
(3 miles [4.8 km] to the west)
- Glen Union
(5 miles [8 km] to the south)
- Glen Union is located in Clinton County
- Jump to our Gazetteer entry for Glen Union
- Whetham
(5 miles [8 km] to the southeast)
- Whetham is located in Clinton County
- Jump to our Gazetteer entry for Whetham
- Renovo
(5 miles [8 km] to the west)
- Shintown
(8 miles [12.9 km] to the west)
- Shintown is located in Clinton County
- Jump to our Gazetteer entry for Shintown
- Ferney
(8 miles [12.9 km] to the southeast)
- Ferney is located in Clinton County
- Jump to our Gazetteer entry for Ferney
- Haneyville
(8 miles [12.9 km] to the east)
- Haneyville is located in Clinton County
- Jump to our Gazetteer entry for Haneyville
- Westport
(10 miles [16.1 km] to the west)
- Cammal
(10 miles [16.1 km] to the northeast)
- Cammal is located in Lycoming County
- Jump to our Gazetteer entry for Cammal
- Bitumen
(12 miles [19.3 km] to the west)
- Bitumen is located in Clinton County
- Jump to our Gazetteer entry for Bitumen
- Cooks Run
(12 miles [19.3 km] to the west)
- Cooks Run is located in Clinton County
- Jump to our Gazetteer entry for Cooks Run
- Farrandsville
(12 miles [19.3 km] to the southeast)
- Farrandsville is located in Clinton County
- Jump to our Gazetteer entry for Farrandsville
- Jersey Mills
(12 miles [19.3 km] to the east)
- Slate Run
(12 miles [19.3 km] to the northeast)
- Queens Run
(13 miles [20.9 km] to the southeast)
- Queens Run is located in Clinton County
- Jump to our Gazetteer entry for Queens Run
- Hilborn
(13 miles [20.9 km] to the northeast)
- Hilborn is located in Lycoming County
- Jump to our Gazetteer entry for Hilborn
- Cross Fork
(13 miles [20.9 km] to the northwest)
- Keating
(14 miles [22.5 km] to the west)
- Keating is located in Clinton County
- Jump to our Gazetteer entry for Keating
- Beech Creek
(14 miles [22.5 km] to the south)
- Waterville
(14 miles [22.5 km] to the east)
- English Mills
(14 miles [22.5 km] to the east)
- English Mills is located in Lycoming County
- Jump to our Gazetteer entry for English Mills
- Oleona
(15 miles [24.1 km] to the north)
- Oleona is located in Potter County
- Jump to our Gazetteer entry for Oleona
- Hammersley Fork
(15 miles [24.1 km] to the northwest)
- Hammersley Fork is located in Clinton County
- Jump to our Gazetteer entry for Hammersley Fork
- Flemington
(16 miles [25.7 km] to the southeast)
- Flemington is located in Clinton County
- Jump to our Gazetteer entry for Flemington
- Population from the 2020 Census: 1,312 people
- Lock Haven
(16 miles [25.7 km] to the southeast)
- Woolrich
(16 miles [25.7 km] to the southeast)
- Woolrich is located in Clinton County
- Jump to our Gazetteer entry for Woolrich
- Ramsey
(16 miles [25.7 km] to the east)
- Ramsey is located in Lycoming County
- Jump to our Gazetteer entry for Ramsey
- Cedar Run
(16 miles [25.7 km] to the northeast)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hyner, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |