|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Grandview in the Atlas, the following communities of the 1890's would have been found near the current location of Grandview. The following communities are listed based on their distance, with the one closest to Grandview listed first.
- Webster
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for Webster
- Webster is located in Westmoreland County
- Charleroi
(2 miles [3.2 km] to the southwest)
- Gibsonton
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Gibsonton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gibsonton
- Gibsonton is located in Westmoreland County
- Belle Vernon
(2 miles [3.2 km] to the south)
- Sunny Side
(2 miles [3.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sunny Side. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sunny Side
- Sunny Side is located in Allegheny County
- Manown
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Manown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manown
- Manown is located in Allegheny County
- Black Diamond
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for Black Diamond
- Black Diamond is located in Washington County
- Riverview
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Riverview have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverview
- Riverview is located in Washington County
- Monongahela
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Monongahela have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monongahela
- Monongahela is located in Washington County
- Population from the 2020 Census: 4,090 people
- Jump to TripAdvisor's Tourism page for Monongahela <2>
- Roscoe
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Roscoe have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roscoe
- Roscoe is located in Washington County
- Population from the 2020 Census: 791 people
- Fayette City
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Fayette City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fayette City
- Fayette City is located in Fayette County
- Population from the 2020 Census: 569 people
- Lover
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lover. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lover
- Lover is located in Washington County
- Stockdale
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Stockdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stockdale
- Stockdale is located in Washington County
- Population from the 2020 Census: 500 people
- Jump to TripAdvisor's Tourism page for Stockdale <2>
- Elco
(5 miles [8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Elco. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elco
- Elco is located in Washington County
- Population from the 2020 Census: 305 people
- Allenport
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Allenport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allenport
- Allenport is located in Washington County
- Population from the 2020 Census: 494 people
- Jump to TripAdvisor's Tourism page for Allenport <2>
- Speers
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Speers have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Speers
- Speers is located in Washington County
- Population from the 2020 Census: 1,061 people
- Fitz Henry
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Fitz Henry have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fitz Henry
- Fitz Henry is located in Westmoreland County
- Port Royal
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Port Royal have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Royal
- Port Royal is located in Westmoreland County
- Sutersville
(5 miles [8 km] to the northeast)
- Hilldale
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Hilldale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hilldale
- Hilldale is located in Allegheny County
- New Eagle
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for New Eagle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Eagle
- New Eagle is located in Washington County
- Population from the 2020 Census: 2,079 people
- Jump to TripAdvisor's Tourism page for New Eagle <2>
- Baidland
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Baidland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baidland
- Baidland is located in Washington County
- Coal Center
(6 miles [9.7 km] to the south)
- Smithton
(6 miles [9.7 km] to the east)
- West Newton
(6 miles [9.7 km] to the northeast)
- Blythedale
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Blythedale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blythedale
- Blythedale is located in Allegheny County
- Douglass
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Douglass have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Douglass
- Douglass is located in Allegheny County
- Shire Oaks
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Shire Oaks have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shire Oaks
- Shire Oaks is located in Washington County
- Bunola
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Bunola have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunola
- Bunola is located in Allegheny County
- Wallace
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Wallace have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallace
- Wallace is located in Allegheny County
- Huston Run
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Huston Run have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huston Run
- Huston Run is located in Washington County
- Elkhorn
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Elkhorn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elkhorn
- Elkhorn is located in Allegheny County
- Courtney
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Courtney have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Courtney
- Courtney is located in Washington County
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Grandview, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|