Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Gimberlings Mill in the Atlas, the following communities of the 1890's would have been found near the current location of Gimberlings Mill. The following communities are listed based on their distance, with the one closest to Gimberlings Mill listed first.
- Maze
(Less than 2 miles to the south)
- Maze is located in Juniata County
- Jump to our Gazetteer entry for Maze
- Cocolamus
(Less than 2 miles to the north)
- Cocolamus is located in Juniata County
- Jump to our Gazetteer entry for Cocolamus
- Swales
(Less than 2 miles to the northwest)
- Swales is located in Juniata County
- Jump to our Gazetteer entry for Swales
- East Salem
(2 miles [3.2 km] to the southwest)
- East Salem is located in Juniata County
- Jump to our Gazetteer entry for East Salem
- Evendale
(3 miles [4.8 km] to the northeast)
- Evendale is located in Juniata County
- Jump to our Gazetteer entry for Evendale
- McAlisterville
(3 miles [4.8 km] to the west)
- Wardville
(4 miles [6.4 km] to the southeast)
- Wardville is located in Perry County
- Jump to our Gazetteer entry for Wardville
- Dimmsville
(4 miles [6.4 km] to the southeast)
- Dimmsville is located in Juniata County
- Jump to our Gazetteer entry for Dimmsville
- Oakland Mills
(5 miles [8 km] to the west)
- Oakland Mills is located in Juniata County
- Jump to our Gazetteer entry for Oakland Mills
- Van Wert
(5 miles [8 km] to the southwest)
- Van Wert is located in Juniata County
- Jump to our Gazetteer entry for Van Wert
- Thompsontown
(5 miles [8 km] to the south)
- Millerstown
(6 miles [9.7 km] to the southeast)
- Nekoda
(6 miles [9.7 km] to the southeast)
- Nekoda is located in Perry County
- Jump to our Gazetteer entry for Nekoda
- Knousetown
(6 miles [9.7 km] to the east)
- Knousetown is located in Juniata County
- Jump to our Gazetteer entry for Knousetown
- Richfield
(6 miles [9.7 km] to the northeast)
- Beaver Springs
(7 miles [11.3 km] to the north)
- Beaver Springs is located in Snyder County
- Jump to our Gazetteer entry for Beaver Springs
- Raubs Mills
(7 miles [11.3 km] to the northwest)
- Raubs Mills is located in Snyder County
- Jump to our Gazetteer entry for Raubs Mills
- McClure
(7 miles [11.3 km] to the northwest)
- Vandyke
(8 miles [12.9 km] to the southwest)
- Vandyke is located in Juniata County
- Jump to our Gazetteer entry for Vandyke
- Donnally Mills
(8 miles [12.9 km] to the south)
- Donnally Mills is located in Perry County
- Jump to our Gazetteer entry for Donnally Mills
- Reward
(8 miles [12.9 km] to the southeast)
- Reward is located in Perry County
- Jump to our Gazetteer entry for Reward
- Pfoutz Valley
(8 miles [12.9 km] to the east)
- Pfoutz Valley is located in Perry County
- Jump to our Gazetteer entry for Pfoutz Valley
- Beavertown
(8 miles [12.9 km] to the north)
- Lowell
(8 miles [12.9 km] to the northwest)
- Lowell is located in Snyder County
- Jump to our Gazetteer entry for Lowell
- Middle Creek
(9 miles [14.5 km] to the north)
- Middle Creek is located in Snyder County
- Jump to our Gazetteer entry for Middle Creek
- Benfer
(9 miles [14.5 km] to the north)
- Benfer is located in Snyder County
- Jump to our Gazetteer entry for Benfer
- Strouptown
(9 miles [14.5 km] to the northeast)
- Strouptown is located in Snyder County
- Jump to our Gazetteer entry for Strouptown
- Crossgrove
(9 miles [14.5 km] to the northwest)
- Crossgrove is located in Snyder County
- Jump to our Gazetteer entry for Crossgrove
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gimberlings Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |