Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Dunnstown in the Atlas, the following communities of the 1890's would have been found near the current location of Dunnstown. The following communities are listed based on their distance, with the one closest to Dunnstown listed first.
- Lock Haven
(Less than 2 miles to the southwest)
- Castanea
(Less than 2 miles to the south)
- Flemington
(2 miles [3.2 km] to the southwest)
- Flemington is located in Clinton County
- Jump to our Gazetteer entry for Flemington
- Population from the 2020 Census: 1,312 people
- McElhattan
(3 miles [4.8 km] to the east)
- Chatham Run
(3 miles [4.8 km] to the northeast)
- Chatham Run is located in Clinton County
- Jump to our Gazetteer entry for Chatham Run
- Queens Run
(3 miles [4.8 km] to the northwest)
- Queens Run is located in Clinton County
- Jump to our Gazetteer entry for Queens Run
- Mill Hall
(4 miles [6.4 km] to the southwest)
- Salona
(4 miles [6.4 km] to the southwest)
- Salona is located in Clinton County
- Jump to our Gazetteer entry for Salona
- Rote
(4 miles [6.4 km] to the south)
- Rote is located in Clinton County
- Jump to our Gazetteer entry for Rote
- Woolrich
(4 miles [6.4 km] to the northeast)
- Woolrich is located in Clinton County
- Jump to our Gazetteer entry for Woolrich
- Cedar Springs
(5 miles [8 km] to the southwest)
- Cedar Springs is located in Clinton County
- Jump to our Gazetteer entry for Cedar Springs
- Farrandsville
(5 miles [8 km] to the west)
- Farrandsville is located in Clinton County
- Jump to our Gazetteer entry for Farrandsville
- Mackeyville
(6 miles [9.7 km] to the south)
- Mackeyville is located in Clinton County
- Jump to our Gazetteer entry for Mackeyville
- Parvin
(7 miles [11.3 km] to the southwest)
- Parvin is located in Clinton County
- Jump to our Gazetteer entry for Parvin
- Beech Creek
(7 miles [11.3 km] to the west)
- Jersey Shore
(8 miles [12.9 km] to the northeast)
- Tombs Run
(8 miles [12.9 km] to the northeast)
- Tombs Run is located in Lycoming County
- Jump to our Gazetteer entry for Tombs Run
- Logan Mills
(9 miles [14.5 km] to the south)
- Logan Mills is located in Clinton County
- Jump to our Gazetteer entry for Logan Mills
- Booneville
(9 miles [14.5 km] to the south)
- Booneville is located in Clinton County
- Jump to our Gazetteer entry for Booneville
- Rauchtown
(9 miles [14.5 km] to the east)
- Rauchtown is located in Clinton County
- Jump to our Gazetteer entry for Rauchtown
- Ferney
(9 miles [14.5 km] to the northwest)
- Ferney is located in Clinton County
- Jump to our Gazetteer entry for Ferney
- Blanchard
(10 miles [16.1 km] to the southwest)
- Blanchard is located in Centre County
- Jump to our Gazetteer entry for Blanchard
- Eagleville
(10 miles [16.1 km] to the southwest)
- Eagleville is located in Centre County
- Jump to our Gazetteer entry for Eagleville
- Abdera
(10 miles [16.1 km] to the southwest)
- Abdera is located in Clinton County
- Jump to our Gazetteer entry for Abdera
- Lamar
(10 miles [16.1 km] to the southwest)
- Clintondale
(10 miles [16.1 km] to the southwest)
- Clintondale is located in Clinton County
- Jump to our Gazetteer entry for Clintondale
- Tylersville
(10 miles [16.1 km] to the south)
- Tylersville is located in Clinton County
- Jump to our Gazetteer entry for Tylersville
- Greenburr
(10 miles [16.1 km] to the south)
- Greenburr is located in Clinton County
- Jump to our Gazetteer entry for Greenburr
- Oriole
(10 miles [16.1 km] to the east)
- Oriole is located in Lycoming County
- Jump to our Gazetteer entry for Oriole
- Antes Fort
(10 miles [16.1 km] to the east)
- Antes Fort is located in Lycoming County
- Jump to our Gazetteer entry for Antes Fort
- Ramsey
(10 miles [16.1 km] to the northeast)
- Ramsey is located in Lycoming County
- Jump to our Gazetteer entry for Ramsey
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Dunnstown, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |