Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Custards had a population of 157 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Custards, with the one closest to Custards listed first.
- Shaws Landing
(2 miles [3.2 km] to the northeast)- Note: The GPS coordinates that we are using for Shaws Landing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shaws Landing
- Shaws Landing is located in Crawford County
- Geneva
(4 miles [6.4 km] to the northwest) - Sheakleyville
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for Sheakleyville
- Sheakleyville is located in Mercer County
- Population from the 2020 Census: 134 people
- Milledgeville
(6 miles [9.7 km] to the southeast)- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Mercer County
- Kerrtown
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Kerrtown
- Kerrtown is located in Crawford County
- Meadville
(7 miles [11.3 km] to the north)- Jump to our Gazetteer entry for Meadville
- Meadville is located in Crawford County
- Population from the 2020 Census: 12,386 people
- Jump to TripAdvisor's Tourism page for Meadville <3>
- West Vernon
(7 miles [11.3 km] to the northwest)- Note: The GPS coordinates that we are using for West Vernon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Vernon
- West Vernon is located in Crawford County
- Osborn
(8 miles [12.9 km] to the southwest) - Hadley
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Hadley
- Hadley is located in Mercer County
- Jump to TripAdvisor's Tourism page for Hadley <3>
- New Vernon
(8 miles [12.9 km] to the south)- Note: The GPS coordinates that we are using for New Vernon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Vernon
- New Vernon is located in Mercer County
- Carlton
(8 miles [12.9 km] to the southeast) - Wayland
(8 miles [12.9 km] to the northeast) - Atlantic
(9 miles [14.5 km] to the west) - Clarks Mills
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Clarks Mills
- Clarks Mills is located in Mercer County
- New Lebanon
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for New Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Lebanon
- New Lebanon is located in Mercer County
- Population from the 2020 Census: 170 people
- Deckard
(9 miles [14.5 km] to the east) - Frenchtown
(9 miles [14.5 km] to the northeast)- Note: The GPS coordinates that we are using for Frenchtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frenchtown
- Frenchtown is located in Crawford County
- Conneaut Lake
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Conneaut Lake
- Conneaut Lake is located in Crawford County
- Population from the 2020 Census: 611 people
- Jump to TripAdvisor's Tourism page for Conneaut Lake <3>
- Stony Point
(9 miles [14.5 km] to the west)- Note: The GPS coordinates that we are using for Stony Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stony Point
- Stony Point is located in Crawford County
- Kennard
(10 miles [16.1 km] to the southwest) - Five Points
(10 miles [16.1 km] to the south)- Note: The GPS coordinates that we are using for Five Points have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Five Points
- Five Points is located in Mercer County
- Watson Run
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Watson Run
- Watson Run is located in Crawford County
- Adamsville
(10 miles [16.1 km] to the west)- Jump to our Gazetteer entry for Adamsville
- Adamsville is located in Crawford County
- Leechs Corners
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Leechs Corners
- Leechs Corners is located in Mercer County
- Salem
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Salem
- Salem is located in Mercer County
- Guys Mills
(11 miles [17.7 km] to the northeast)- Note: The GPS coordinates that we are using for Guys Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guys Mills
- Guys Mills is located in Crawford County
- Jump to TripAdvisor's Tourism page for Guys Mills <3>
- Hartstown
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Hartstown
- Hartstown is located in Crawford County
Off-the-Road Links ...
The official website for Crawford County: www.co.crawford.pa.us/
The official website for State of Pennsylvania: https://www.pa.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Custards, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |