|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Corwins Corners in the Atlas, the following communities of the 1890's would have been found near the current location of Corwins Corners. The following communities are listed based on their distance, with the one closest to Corwins Corners listed first.
- Sawyer City
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Sawyer City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sawyer City
- Sawyer City is located in McKean County
- Dallas City
(Less than 2 miles to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Dallas City. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dallas City
- Dallas City is located in McKean County
- Rew
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for Rew
- Rew is located in McKean County
- Summit
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for Summit
- Summit is located in McKean County
- Red Rock
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Red Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Rock
- Red Rock is located in McKean County
- Gilmore
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Gilmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilmore
- Gilmore is located in McKean County
- Derrick City
(2 miles [3.2 km] to the north)
- Degolia
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for Degolia
- Degolia is located in McKean County
- Aiken
(3 miles [4.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Aiken. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Aiken
- Aiken is located in McKean County
- Foster Brook
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Foster Brook. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Foster Brook
- Foster Brook is located in McKean County
- Bells Camp
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Bells Camp have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bells Camp
- Bells Camp is located in McKean County
- Bradford
(3 miles [4.8 km] to the northwest)
- Custer City
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Custer City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Custer City
- Custer City is located in McKean County
- Jump to TripAdvisor's Tourism page for Custer City <4>
- Tuna
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Tuna. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tuna
- Tuna is located in McKean County
- Coleville
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Coleville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coleville
- Coleville is located in McKean County
- Rixford
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Rixford
- Rixford is located in McKean County
- Lewis Run
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Lewis Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lewis Run
- Lewis Run is located in McKean County
- Population from the 2020 Census: 564 people
- Jump to TripAdvisor's Tourism page for Lewis Run <4>
- Gifford
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Gifford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gifford
- Gifford is located in McKean County
- Duke Center
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Duke Center
- Duke Center is located in McKean County
- Simpson
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Simpson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Simpson
- Simpson is located in McKean County
- Cyclone
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Cyclone have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in McKean County
- Big Shanty
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Big Shanty. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Big Shanty
- Big Shanty is located in McKean County
- Limestone
(7 miles [11.3 km] to the north)
- Prentisvale
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Prentisvale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prentisvale
- Prentisvale is located in McKean County
- Ormsby
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Ormsby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ormsby
- Ormsby is located in McKean County
- Farmers Valley
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Farmers Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmers Valley
- Farmers Valley is located in McKean County
- Four Mile
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Four Mile. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Four Mile
- Four Mile is located in Cattaraugus County (NY)
- Chipmunk
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Chipmunk. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Chipmunk
- Chipmunk is located in Cattaraugus County (NY)
Off-the-Road Links ...
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Corwins Corners, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|