Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Millbank Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Millbank Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Millbank Cemetery. We've listed the following communities based on their distance, with the closest first.

Fredonia
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for Fredonia
- Fredonia is located in Mercer County
- Population from the 2020 Census: 452 people
- Jump to TripAdvisor's Tourism page for Fredonia <2>
- Google driving directions:
- From your current location to Fredonia
- From the Millbank Cemetery to Fredonia
Coolspring
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for Coolspring
- Coolspring is located in Mercer County
- Google driving directions:
- From your current location to Coolspring
- From the Millbank Cemetery to Coolspring
Kremis
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kremis. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kremis
- Kremis is located in Mercer County
- Google driving directions:
- From your current location to Kremis
- From the Millbank Cemetery to Kremis
Kashner
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kashner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kashner
- Kashner is located in Mercer County
- Google driving directions:
- From your current location to Kashner
- From the Millbank Cemetery to Kashner
Mercer
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Mercer
- Mercer is located in Mercer County
- Population from the 2020 Census: 1,865 people
- Jump to TripAdvisor's Tourism page for Mercer <2>
- Google driving directions:
- From your current location to Mercer
- From the Millbank Cemetery to Mercer
Clarks Mills
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Clarks Mills
- Clarks Mills is located in Mercer County
- Google driving directions:
- From your current location to Clarks Mills
- From the Millbank Cemetery to Clarks Mills
Hadley
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Hadley
- Hadley is located in Mercer County
- Jump to TripAdvisor's Tourism page for Hadley <2>
- Google driving directions:
- From your current location to Hadley
- From the Millbank Cemetery to Hadley
Jackson Center
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Jackson Center. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jackson Center
- Jackson Center is located in Mercer County
- Population from the 2020 Census: 206 people
- Jump to TripAdvisor's Tourism page for Jackson Center <2>
- Google driving directions:
- From your current location to Jackson Center
- From the Millbank Cemetery to Jackson Center
Stoneboro
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Stoneboro
- Stoneboro is located in Mercer County
- Population from the 2020 Census: 974 people
- Jump to TripAdvisor's Tourism page for Stoneboro <2>
- Google driving directions:
- From your current location to Stoneboro
- From the Millbank Cemetery to Stoneboro
Salem
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Salem
- Salem is located in Mercer County
- Google driving directions:
- From your current location to Salem
- From the Millbank Cemetery to Salem
Leechs Corners
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Leechs Corners
- Leechs Corners is located in Mercer County
- Google driving directions:
- From your current location to Leechs Corners
- From the Millbank Cemetery to Leechs Corners
Sheakleyville
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Sheakleyville
- Sheakleyville is located in Mercer County
- Population from the 2020 Census: 134 people
- Google driving directions:
- From your current location to Sheakleyville
- From the Millbank Cemetery to Sheakleyville
Greenville
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Mercer County
- Population from the 2020 Census: 5,177 people
- Jump to TripAdvisor's Tourism page for Greenville <2>
Shenango
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Shenango
- Shenango is located in Mercer County
- Google driving directions:
- From your current location to Shenango
- From the Millbank Cemetery to Shenango
Sandy Lake
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Sandy Lake
- Sandy Lake is located in Mercer County
- Population from the 2020 Census: 621 people
- Jump to TripAdvisor's Tourism page for Sandy Lake <2>
- Google driving directions:
- From your current location to Sandy Lake
- From the Millbank Cemetery to Sandy Lake
New Vernon
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for New Vernon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for New Vernon
- New Vernon is located in Mercer County
- Google driving directions:
- From your current location to New Vernon
- From the Millbank Cemetery to New Vernon
Osgood
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Osgood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Osgood
- Osgood is located in Mercer County
- Google driving directions:
- From your current location to Osgood
- From the Millbank Cemetery to Osgood
Millburn
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Millburn. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Millburn
- Millburn is located in Mercer County
- Google driving directions:
- From your current location to Millburn
- From the Millbank Cemetery to Millburn
Kennard
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kennard. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kennard
- Kennard is located in Mercer County
- Google driving directions:
- From your current location to Kennard
- From the Millbank Cemetery to Kennard
Perrine Corners
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Perrine Corners
- Perrine Corners is located in Mercer County
- Google driving directions:
- From your current location to Perrine Corners
- From the Millbank Cemetery to Perrine Corners
Hermitage
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Hermitage
- Hermitage is located in Mercer County
- Population from the 2020 Census: 15,468 people
- Jump to TripAdvisor's Tourism page for Hermitage <2>
- Google driving directions:
- From your current location to Hermitage
- From the Millbank Cemetery to Hermitage
New Lebanon
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for New Lebanon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for New Lebanon
- New Lebanon is located in Mercer County
- Population from the 2020 Census: 170 people
- Google driving directions:
- From your current location to New Lebanon
- From the Millbank Cemetery to New Lebanon
Sharpsville
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Sharpsville
- Sharpsville is located in Mercer County
- Population from the 2020 Census: 4,041 people
- Jump to TripAdvisor's Tourism page for Sharpsville <2>
- Google driving directions:
- From your current location to Sharpsville
- From the Millbank Cemetery to Sharpsville
Carbon
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Carbon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Carbon
- Carbon is located in Mercer County
- Google driving directions:
- From your current location to Carbon
- From the Millbank Cemetery to Carbon
Perrys Corners
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Perrys Corners
- Perrys Corners is located in Mercer County
- Google driving directions:
- From your current location to Perrys Corners
- From the Millbank Cemetery to Perrys Corners

Off-the-Road Links ...

The official website for Mercer County: www.mcc.co.mercer.pa.us/

The official website for Commonwealth of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Millbank Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.3257, Longitude: -80.2580
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.