|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Fairview Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Fairview Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Fairview Cemetery. We've listed the following communities based on their distance, with the closest first.
- Port Allegany
(Less than 2 miles to the southwest)
- Williston
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Williston. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Williston
- Williston is located in Potter County
- Sartwell
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Sartwell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sartwell
- Sartwell is located in McKean County
- Roulette
(6 miles [9.7 km] to the southeast)
- Crosby
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Crosby
- Crosby is located in McKean County
- Larabee
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Larabee have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larabee
- Larabee is located in McKean County
- Smethport
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Smethport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smethport
- Smethport is located in McKean County
- Population from the 2020 Census: 1,518 people
- Jump to TripAdvisor's Tourism page for Smethport <2>
- Hebron
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hebron. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hebron
- Hebron is located in Potter County
- Millport
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Millport
- Millport is located in Potter County
- Shinglehouse
(10 miles [16.1 km] to the north)
- Eldred
(11 miles [17.7 km] to the northwest)
- Myrtle
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Myrtle. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Myrtle
- Myrtle is located in McKean County
- Coneville
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Coneville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Coneville
- Coneville is located in Potter County
- East Sharon
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for East Sharon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for East Sharon
- East Sharon is located in Potter County
- Bowler
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Bowler
- Bowler is located in Allegany County (NY)
- Wrights Corners
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Wrights Corners
- Wrights Corners is located in McKean County
- Gardeau
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Gardeau
- Gardeau is located in McKean County
- Coudersport
(13 miles [20.9 km] to the east)
- Honeoye
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Honeoye. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Honeoye
- Honeoye is located in Potter County
- Rixford
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Rixford
- Rixford is located in McKean County
- Clermont
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Clermont. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clermont
- Clermont is located in McKean County
- Inez
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Inez
- Inez is located in Potter County
- Little Genesee
(14 miles [22.5 km] to the north)
- Duke Center
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Duke Center
- Duke Center is located in McKean County
- Rew
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Rew
- Rew is located in McKean County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Fairview Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.8178, Longitude: -78.2742 In this case, the coordinates for the Fairview Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|