|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Fairview Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Fairview Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Fairview Cemetery. We've listed the following communities based on their distance, with the closest first.
- Flemington
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Flemington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flemington
- Flemington is located in Clinton County
- Population from the 2020 Census: 1,312 people
- Lock Haven
(Less than 2 miles to the east)
- Castanea
(Less than 2 miles to the southeast)
- Mill Hall
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Mill Hall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Hall
- Mill Hall is located in Clinton County
- Population from the 2020 Census: 1,586 people
- Jump to TripAdvisor's Tourism page for Mill Hall <3>
- Dunnstown
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Dunnstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunnstown
- Dunnstown is located in Clinton County
- Cedar Springs
(3 miles [4.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cedar Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in Clinton County
- Salona
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for Salona
- Salona is located in Clinton County
- Swissdale
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Swissdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swissdale
- Swissdale is located in Clinton County
- Farrandsville
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Farrandsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Farrandsville
- Farrandsville is located in Clinton County
- Rote
(4 miles [6.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rote. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rote
- Rote is located in Clinton County
- Youngdale
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Youngdale
- Youngdale is located in Clinton County
- McElhattan
(5 miles [8 km] to the east)
- Beech Creek
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Beech Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Creek
- Beech Creek is located in Clinton County
- Population from the 2020 Census: 685 people
- Jump to TripAdvisor's Tourism page for Beech Creek <3>
- Blanchard
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Blanchard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blanchard
- Blanchard is located in Centre County
- Abdera
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Abdera
- Abdera is located in Clinton County
- Lamar
(8 miles [12.9 km] to the southwest)
- Avis
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Avis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avis
- Avis is located in Clinton County
- Population from the 2020 Census: 1,476 people
- Jump to TripAdvisor's Tourism page for Avis <3>
- Tylersville
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Tylersville
- Tylersville is located in Clinton County
- Greenburr
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Greenburr
- Greenburr is located in Clinton County
- Loganton
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Loganton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loganton
- Loganton is located in Clinton County
- Population from the 2020 Census: 475 people
- Jump to TripAdvisor's Tourism page for Loganton <3>
- Rauchtown
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Rauchtown
- Rauchtown is located in Clinton County
- Antes Fort
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Antes Fort. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Antes Fort
- Antes Fort is located in Lycoming County
- Ramsey
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ramsey. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ramsey
- Ramsey is located in Lycoming County
- Monument
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Monument have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monument
- Monument is located in Centre County
- Romola
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Romola. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Romola
- Romola is located in Centre County
- Howard
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard
- Howard is located in Centre County
- Population from the 2020 Census: 728 people
- Jump to TripAdvisor's Tourism page for Howard <3>
- Jacksonville
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Centre County
- Rebersburg
(13 miles [20.9 km] to the south)
- Livonia
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Livonia. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Livonia
- Livonia is located in Centre County
Off-the-Road Links ...
The official website for Clinton County: www.clintoncountypa.com/ The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Fairview Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.1351, Longitude: -77.4622 In this case, the coordinates for the Fairview Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|