Welcome to Mountain View ...
So far, we found very little information about Mountain View. The little that we've found leads us believe that the community is historic.<1>
We've added Mountain View to our Gazetteer with the hope that we can develop more information. If you can help us with Mountain View, please Contact Us.
Mountain View would have been located within present day Jackson County<2>.
A typical abbreviation for Mountain View: Mountain Vw.
While the community is gone, the present day location for Mountain View is 1,420 feet [433 m] above sea level.<3>.
Time Zone: The area where Mountain View was located is in the Pacific Time Zone (PST/PDT) and observes daylight saving time
The Area Codes where Mountain View was located: 541 & 458<4>
Communities Also Named Mountain View ...
Using our Gazetteer, we found that there are 74 communities that are also named Mountain View - they are located in Alabama (2), Alaska, Alberta, Arizona (2), Arkansas, California (6), Colorado (4), Georgia (2), Hawaii, Idaho, Maryland (2), Missouri (2), Montana (2), Nevada (2), New Brunswick, New Jersey, New Mexico (2), New York (2), North Carolina (7), Ohio, Oklahoma, Ontario (2), Pennsylvania, Quebec (2), South Carolina, Tennessee (4), Texas (3), Utah, Virginia (11), Washington (2), West Virginia and Wyoming (2).
For more information, see our Tidbits & Trivia Page for Mountain View.
Websites for Mountain View ...
Junior League: www.jlojc.com/
Communities near Mountain View ...
We have created a list of 10 communities that are near Mountain View.
- Medford
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Medford
- Medford is located in Jackson County
- Population from the 2020 Census: 83,412 people
- Jump to TripAdvisor's Tourism page for Medford <5>
- Central Point
(10 miles [16.1 km] to the southwest)- Jump to our Gazetteer entry for Central Point
- Central Point is located in Jackson County
- Population from the 2020 Census: 19,117 people
- Jump to TripAdvisor's Tourism page for Central Point <5>
- Talent
(17 miles [27.4 km] to the south)- Note: The GPS coordinates that we are using for Talent have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talent
- Talent is located in Jackson County
- Population from the 2020 Census: 6,700 people
- Jump to TripAdvisor's Tourism page for Talent <5>
- Phoenix
(15 miles [24.1 km] to the south)- Note: The GPS coordinates that we are using for Phoenix have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Phoenix
- Phoenix is located in Jackson County
- Population from the 2020 Census: 4,678 people
- Jump to TripAdvisor's Tourism page for Phoenix <5>
- Shady Cove
(8 miles [12.9 km] to the north)- Note: The GPS coordinates that we are using for Shady Cove have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shady Cove
- Shady Cove is located in Jackson County
- Population from the 2020 Census: 3,119 people
- Jump to TripAdvisor's Tourism page for Shady Cove <5>
- Jacksonville
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Jackson County
- Population from the 2020 Census: 2,865 people
- Jump to TripAdvisor's Tourism page for Jacksonville <5>
- Rogue River
(19 miles [30.6 km] to the west)- Note: The GPS coordinates that we are using for Rogue River have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rogue River
- Rogue River is located in Jackson County
- Population from the 2020 Census: 2,340 people
- Jump to TripAdvisor's Tourism page for Rogue River <5>
- Gold Hill
(13 miles [20.9 km] to the west)- Jump to our Gazetteer entry for Gold Hill
- Gold Hill is located in Jackson County
- Population from the 2020 Census: 1,297 people
- Jump to TripAdvisor's Tourism page for Gold Hill <5>
- Butte Falls
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Butte Falls have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butte Falls
- Butte Falls is located in Jackson County
- Population from the 2020 Census: 457 people
- Jump to TripAdvisor's Tourism page for Butte Falls <5>
- Brownsboro
(4 miles [6.4 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Brownsboro. Although the coordinates have been estimated, they should be in the vicinity.<7>
- Jump to our Gazetteer entry for Brownsboro
- Brownsboro is located in Jackson County
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Mountain View. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Mountain View.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Mountain View. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Mountain View.
We also have a detailed list of newspapers that have been published in the area around Mountain View. See our Newspapers Page for Mountain View.
Off-the-Road Links ...
The official website for Jackson County: www.co.jackson.or.us/
The official website for State of Oregon: https://www.oregon.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mountain View, please let us know so that we can improve our accuracy. |
| <2> | If you're interested in how the shape of Oregon's counties, including Jackson, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <3> | The elevation is an estimate for the area around Mountain View - it will be higher in some places and lower in others. |
| <4> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 541 code has been Overlayed with the 458 area code. New phone numbers in the Mountain View area will be assigned with one of these codes: 541 or 458. As a result, placing a call in the Mountain View area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <6> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <7> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |