Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mt. Hope Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Hope Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Mt. Hope Cemetery (FG ID #39167). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Mt. Hope Cemetery. We've listed the following communities based on their distance, with the closest first.
- Baker City
(Less than 2 miles to the northwest)
- Auburn ‑ Historic
(7 miles [11.3 km] to the southwest)
- Pocahontas ‑ Historic
(8 miles [12.9 km] to the northwest)
- Haines
(11 miles [17.7 km] to the northwest)
- Keating
(13 miles [20.9 km] to the northeast)
- Hutchinson ‑ Historic
(16 miles [25.7 km] to the northwest)
- North Powder
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for North Powder have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Powder
- North Powder is located in Union County
- Population from the 2020 Census: 458 people
- Jump to TripAdvisor's Tourism page for North Powder <3>
- Bourne
(18 miles [29 km] to the west)
- Sumpter
(18 miles [29 km] to the west)
- Bridgeport
(19 miles [30.6 km] to the south)
- China Town
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for China Town have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for China Town
- China Town is located in Baker County
- Medical Springs
(19 miles [30.6 km] to the northeast)
- Hereford
(21 miles [33.8 km] to the southwest)
- Durkee
(21 miles [33.8 km] to the southeast)
- Whitney ‑ Historic
(24 miles [38.6 km] to the west)
- Malheur City ‑ Historic
(24 miles [38.6 km] to the south)
- Sparta ‑ Historic
(25 miles [40.2 km] to the east)
- Rye Valley
(26 miles [41.8 km] to the southeast)
- Unity
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Unity have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Unity
- Unity is located in Baker County
- Population from the 2020 Census: 71 people
- Jump to TripAdvisor's Tourism page for Unity <3>
- Weatherby
(28 miles [45.1 km] to the southeast)
- Cabell City
(28 miles [45.1 km] to the west)
- Granite
(29 miles [46.7 km] to the west)
Off-the-Road Links ...
The official website for Baker County: www.bakercounty.org/
The official website for State of Oregon: https://www.oregon.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Hope Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.7658, Longitude: -117.8197 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |