|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Wadsworth. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Wadsworth.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Wadsworth - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 105 communities listed:
- Akron
(11 miles [17.7 km] to the east)
- Apple Creek
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Apple Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Apple Creek
- Apple Creek is located in Wayne County
- Population from the 2020 Census: 1,185 people
- Jump to TripAdvisor's Tourism page for Apple Creek <2>
- Atwater
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Atwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atwater
- Atwater is located in Portage County
- Jump to TripAdvisor's Tourism page for Atwater <2>
- Aurora
(28 miles [45.1 km] to the northeast)
- Barberton
(7 miles [11.3 km] to the east)
- Bath
(12 miles [19.3 km] to the northeast)
- Beach City
(27 miles [43.5 km] to the south)
- Bedford Heights
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bedford Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bedford Heights
- Bedford Heights is located in Cuyahoga County
- Population from the 2020 Census: 10,397 people
- Jump to TripAdvisor's Tourism page for Bedford Heights <2>
- Bedford
(27 miles [43.5 km] to the north)
- Berea
(24 miles [38.6 km] to the north)
- Bolivar
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Bolivar have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bolivar
- Bolivar is located in Tuscarawas County
- Population from the 2020 Census: 965 people
- Jump to TripAdvisor's Tourism page for Bolivar <2>
- Brecksville
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Brecksville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brecksville
- Brecksville is located in Cuyahoga County
- Population from the 2020 Census: 13,530 people
- Jump to TripAdvisor's Tourism page for Brecksville <2>
- Brewster
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Brewster have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brewster
- Brewster is located in Stark County
- Population from the 2020 Census: 2,143 people
- Jump to TripAdvisor's Tourism page for Brewster <2>
- Brimfield
(20 miles [32.2 km] to the east)
- Broadview Heights
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Broadview Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broadview Heights
- Broadview Heights is located in Cuyahoga County
- Population from the 2020 Census: 19,095 people
- Jump to TripAdvisor's Tourism page for Broadview Heights <2>
- Brook Park
(25 miles [40.2 km] to the north)
- Brooklyn
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Brooklyn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooklyn
- Brooklyn is located in Cuyahoga County
- Population from the 2020 Census: 10,637 people
- Jump to TripAdvisor's Tourism page for Brooklyn <2>
- Brunswick
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Brunswick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brunswick
- Brunswick is located in Medina County
- Population from the 2020 Census: 35,052 people
- Jump to TripAdvisor's Tourism page for Brunswick <2>
- Burbank
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Burbank have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burbank
- Burbank is located in Wayne County
- Population from the 2020 Census: 199 people
- Jump to TripAdvisor's Tourism page for Burbank <2>
- Canal Fulton
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Canal Fulton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canal Fulton
- Canal Fulton is located in Stark County
- Population from the 2020 Census: 5,399 people
- Jump to TripAdvisor's Tourism page for Canal Fulton <2>
- Canton
(24 miles [38.6 km] to the southeast)
- Chippewa Lake
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Chippewa Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chippewa Lake
- Chippewa Lake is located in Medina County
- Population from the 2020 Census: 749 people
- Former name for Chippewa Lake:
- Chippewa-on-the-Lake
- Jump to TripAdvisor's Tourism page for Chippewa Lake <2>
- Clinton
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Clinton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clinton
- Clinton is located in Summit County
- Population from the 2020 Census: 1,206 people
- Jump to TripAdvisor's Tourism page for Clinton <2>
- Columbia Station
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Columbia Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbia Station
- Columbia Station is located in Lorain County
- Jump to TripAdvisor's Tourism page for Columbia Station <2>
- Copley
(6 miles [9.7 km] to the northeast)
- Creston
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Creston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Creston
- Creston is located in Wayne County
- Population from the 2020 Census: 2,184 people
- Jump to TripAdvisor's Tourism page for Creston <2>
- Cuyahoga Falls
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Cuyahoga Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cuyahoga Falls
- Cuyahoga Falls is located in Summit County
- Population from the 2020 Census: 49,005 people
- Jump to TripAdvisor's Tourism page for Cuyahoga Falls <2>
- Cuyahoga Heights
(28 miles [45.1 km] to the north)
- Dalton
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Dalton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dalton
- Dalton is located in Wayne County
- Population from the 2020 Census: 1,891 people
- Jump to TripAdvisor's Tourism page for Dalton <2>
- Doylestown
(4 miles [6.4 km] to the southeast)
- East Canton
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for East Canton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Canton
- East Canton is located in Stark County
- Population from the 2020 Census: 1,569 people
- Jump to TripAdvisor's Tourism page for East Canton <2>
- Elyria
(30 miles [48.3 km] to the northwest)
- Fairlawn
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Fairlawn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairlawn
- Fairlawn is located in Summit County
- Population from the 2020 Census: 7,516 people
- Jump to TripAdvisor's Tourism page for Fairlawn <2>
- Fairview Park
(29 miles [46.7 km] to the north)
- Fredericksburg
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Fredericksburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fredericksburg
- Fredericksburg is located in Wayne County
- Population from the 2020 Census: 414 people
- Jump to TripAdvisor's Tourism page for Fredericksburg <2>
- Grafton
(23 miles [37 km] to the northwest)
- Green
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Green have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green
- Green is located in Summit County
- Population from the 2020 Census: 25,678 people
- Jump to TripAdvisor's Tourism page for Green <2>
- Hartville
(21 miles [33.8 km] to the east)
- Hinckley
(14 miles [22.5 km] to the north)
- Holmesville
(29 miles [46.7 km] to the south)
- Hudson
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Hudson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson
- Hudson is located in Summit County
- Population from the 2020 Census: 22,179 people
- Jump to TripAdvisor's Tourism page for Hudson <2>
- Independence
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Cuyahoga County
- Population from the 2020 Census: 7,194 people
- Jump to TripAdvisor's Tourism page for Independence <2>
- Jeromesville
(28 miles [45.1 km] to the southwest)
- Kent
(21 miles [33.8 km] to the northeast)
- Kidron
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Kidron have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kidron
- Kidron is located in Wayne County
- Jump to TripAdvisor's Tourism page for Kidron <2>
- Lagrange
(24 miles [38.6 km] to the northwest)
- Litchfield
(17 miles [27.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Litchfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Litchfield
- Litchfield is located in Medina County
- Jump to TripAdvisor's Tourism page for Litchfield <2>
- Lodi
(14 miles [22.5 km] to the west)
- Louisville
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Louisville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Louisville
- Louisville is located in Stark County
- Population from the 2020 Census: 9,378 people
- Jump to TripAdvisor's Tourism page for Louisville <2>
- Macedonia
(22 miles [35.4 km] to the northeast)
- Maple Heights
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Maple Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Heights
- Maple Heights is located in Cuyahoga County
- Population from the 2020 Census: 21,863 people
- Jump to TripAdvisor's Tourism page for Maple Heights <2>
- Marshallville
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Marshallville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshallville
- Marshallville is located in Wayne County
- Population from the 2020 Census: 779 people
- Jump to TripAdvisor's Tourism page for Marshallville <2>
- Massillon
(19 miles [30.6 km] to the southeast)
- Medina
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Medina have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Medina
- Medina is located in Medina County
- Population from the 2020 Census: 25,968 people
- Jump to TripAdvisor's Tourism page for Medina <2>
- Middleburg Heights
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Middleburg Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg Heights
- Middleburg Heights is located in Cuyahoga County
- Population from the 2020 Census: 15,340 people
- Jump to TripAdvisor's Tourism page for Middleburg Heights <2>
- Mogadore
(17 miles [27.4 km] to the east)
- Mount Eaton
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Mount Eaton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Eaton
- Mount Eaton is located in Wayne County
- Population from the 2020 Census: 234 people
- Jump to TripAdvisor's Tourism page for Mount Eaton <2>
- Mount Hope
(28 miles [45.1 km] to the south)
- Munroe Falls
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Munroe Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munroe Falls
- Munroe Falls is located in Summit County
- Population from the 2020 Census: 5,054 people
- Jump to TripAdvisor's Tourism page for Munroe Falls <2>
- Navarre
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Navarre have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Navarre
- Navarre is located in Stark County
- Population from the 2020 Census: 1,796 people
- Jump to TripAdvisor's Tourism page for Navarre <2>
- North Canton
(20 miles [32.2 km] to the southeast)
- North Industry
(27 miles [43.5 km] to the southeast)
- North Lawrence
(14 miles [22.5 km] to the southeast)
- North Olmsted
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for North Olmsted have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Olmsted
- North Olmsted is located in Cuyahoga County
- Population from the 2020 Census: 31,173 people
- Jump to TripAdvisor's Tourism page for North Olmsted <2>
- North Randall
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for North Randall have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Randall
- North Randall is located in Cuyahoga County
- Population from the 2020 Census: 982 people
- Jump to TripAdvisor's Tourism page for North Randall <2>
- North Ridgeville
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for North Ridgeville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Ridgeville
- North Ridgeville is located in Lorain County
- Population from the 2020 Census: 35,104 people
- Jump to TripAdvisor's Tourism page for North Ridgeville <2>
- North Royalton
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for North Royalton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Royalton
- North Royalton is located in Cuyahoga County
- Population from the 2020 Census: 29,952 people
- Jump to TripAdvisor's Tourism page for North Royalton <2>
- Northfield
(24 miles [38.6 km] to the northeast)
- Norton
(4 miles [6.4 km] to the east)
- Nova
(29 miles [46.7 km] to the west)
- Olmsted Falls
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Olmsted Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olmsted Falls
- Olmsted Falls is located in Cuyahoga County
- Population from the 2020 Census: 9,084 people
- Jump to TripAdvisor's Tourism page for Olmsted Falls <2>
- Orrville
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Orrville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orrville
- Orrville is located in Wayne County
- Population from the 2020 Census: 8,433 people
- Jump to TripAdvisor's Tourism page for Orrville <2>
- Parma Heights
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Parma Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parma Heights
- Parma Heights is located in Cuyahoga County
- Population from the 2020 Census: 19,644 people
- Jump to TripAdvisor's Tourism page for Parma Heights <2>
- Parma
(26 miles [41.8 km] to the north)
- Peninsula
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Peninsula have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peninsula
- Peninsula is located in Summit County
- Population from the 2020 Census: 549 people
- Jump to TripAdvisor's Tourism page for Peninsula <2>
- Randolph
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Randolph have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Randolph
- Randolph is located in Portage County
- Jump to TripAdvisor's Tourism page for Randolph <2>
- Ravenna
(26 miles [41.8 km] to the east)
- Richfield
(15 miles [24.1 km] to the north)
- Rittman
(4 miles [6.4 km] to the southwest)
- Rootstown
(25 miles [40.2 km] to the east)
- Sagamore Hills
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Sagamore Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sagamore Hills
- Sagamore Hills is located in Summit County
- Jump to TripAdvisor's Tourism page for Sagamore Hills <2>
- Seven Hills
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Seven Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seven Hills
- Seven Hills is located in Cuyahoga County
- Population from the 2020 Census: 11,548 people
- Jump to TripAdvisor's Tourism page for Seven Hills <2>
- Seville
(6 miles [9.7 km] to the west)
- Sharon Center
(4 miles [6.4 km] to the north)
- Shreve
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Shreve have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shreve
- Shreve is located in Wayne County
- Population from the 2020 Census: 1,526 people
- Jump to TripAdvisor's Tourism page for Shreve <2>
- Smithville
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Smithville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithville
- Smithville is located in Wayne County
- Population from the 2020 Census: 1,261 people
- Jump to TripAdvisor's Tourism page for Smithville <2>
- Solon
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Solon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Solon
- Solon is located in Cuyahoga County
- Population from the 2020 Census: 22,660 people
- Jump to TripAdvisor's Tourism page for Solon <2>
- Spencer
(20 miles [32.2 km] to the west)
- Sterling
(7 miles [11.3 km] to the southwest)
- Stow
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Stow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stow
- Stow is located in Summit County
- Population from the 2020 Census: 34,714 people
- Jump to TripAdvisor's Tourism page for Stow <2>
- Streetsboro
(25 miles [40.2 km] to the northeast)
- Strongsville
(20 miles [32.2 km] to the north)
- Sullivan
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Sullivan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sullivan
- Sullivan is located in Ashland County
- Jump to TripAdvisor's Tourism page for Sullivan <2>
- Tallmadge
(15 miles [24.1 km] to the east)
- Twinsburg
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Twinsburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Twinsburg
- Twinsburg is located in Summit County
- Population from the 2020 Census: 18,913 people
- Jump to TripAdvisor's Tourism page for Twinsburg <2>
- Uniontown
(17 miles [27.4 km] to the east)
- Valley City
(17 miles [27.4 km] to the northwest)
- Valley View
(25 miles [40.2 km] to the north)
- Walton Hills
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Walton Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walton Hills
- Walton Hills is located in Cuyahoga County
- Population from the 2020 Census: 2,256 people
- Jump to TripAdvisor's Tourism page for Walton Hills <2>
- Wellington
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Wellington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wellington
- Wellington is located in Lorain County
- Population from the 2020 Census: 4,948 people
- Jump to TripAdvisor's Tourism page for Wellington <2>
- West Salem
(20 miles [32.2 km] to the west)
- Westlake
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Westlake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westlake
- Westlake is located in Cuyahoga County
- Population from the 2020 Census: 31,907 people
- Jump to TripAdvisor's Tourism page for Westlake <2>
- Wilmot
(26 miles [41.8 km] to the south)
- Winesburg
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Winesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winesburg
- Winesburg is located in Holmes County
- Jump to TripAdvisor's Tourism page for Winesburg <2>
- Wooster
(18 miles [29 km] to the southwest)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Wadsworth) to Point B.Our distance measurements begin at a specific point in Wadsworth. The point we use is located at these GPS coordinates - Latitude: 41.0284, Longitude: -81.7323 In this case, the coordinates for Wadsworth have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|