|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Rolling Knolls in the Atlas, the following communities of the 1890's would have been found near the current location of Rolling Knolls. The following communities are listed based on their distance, with the one closest to Rolling Knolls listed first.
- Gano
(Less than 2 miles to the west)
- Note: We haven't been able to verify our GPS coordinates for Gano. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gano
- Gano is located in Butler County
- West Chester
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for West Chester
- West Chester is located in Butler County
- West Chester has also been known as:
- Chester
- Hogtown
- Mechanicsburg
- Jump to TripAdvisor's Tourism page for West Chester <3>
- Pisgah
(Less than 2 miles to the northeast)
- Note: The GPS coordinates that we are using for Pisgah have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Butler County
- Sharonville
(2 miles [3.2 km] to the south)
- Brecon
(2 miles [3.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Brecon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brecon
- Brecon is located in Hamilton County
- Miltomson
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Miltomson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miltomson
- Miltomson is located in Warren County
- Crescentville
(2 miles [3.2 km] to the west)
- Note: The GPS coordinates that we are using for Crescentville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crescentville
- Crescentville is located in Butler County
- Grainthorpe ‑ Historic
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Grainthorpe have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grainthorpe
- Grainthorpe is located in Hamilton County
- Evendale
(3 miles [4.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Evendale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Evendale
- Evendale is located in Hamilton County
- Population from the 2020 Census: 2,709 people
- Jump to TripAdvisor's Tourism page for Evendale <3>
- Hazelwood
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Hazelwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hazelwood
- Hazelwood is located in Hamilton County
- Tylersville
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Tylersville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Tylersville
- Tylersville is located in Butler County
- Socialville
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Socialville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Socialville
- Socialville is located in Warren County
- Rialto
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Rialto have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rialto
- Rialto is located in Butler County
- Glendale
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Glendale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glendale
- Glendale is located in Hamilton County
- Population from the 2020 Census: 2,182 people
- Jump to TripAdvisor's Tourism page for Glendale <3>
- Sixteen Mile Stand
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Sixteen Mile Stand have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sixteen Mile Stand
- Sixteen Mile Stand is located in Hamilton County
- Port Union
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Port Union have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Union
- Port Union is located in Butler County
- Springdale
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Springdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springdale
- Springdale is located in Hamilton County
- Population from the 2020 Census: 11,201 people
- Jump to TripAdvisor's Tourism page for Springdale <3>
- Woodlawn
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Hamilton County
- Population from the 2020 Census: 3,395 people
- Blue Ash
(5 miles [8 km] to the south)
- Montgomery
(5 miles [8 km] to the south)
- Mason
(5 miles [8 km] to the northeast)
- Bethany
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Bethany
- Bethany is located in Butler County
- Hughes
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Hughes have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hughes
- Hughes is located in Butler County
- Park Place
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Park Place have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Park Place
- Park Place is located in Hamilton County
- Wyoming
(6 miles [9.7 km] to the southwest)
- Lockland
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Lockland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lockland
- Lockland is located in Hamilton County
- Population from the 2020 Census: 3,437 people
- Reading
(6 miles [9.7 km] to the southwest)
- Rossmoyne
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Rossmoyne
- Rossmoyne is located in Hamilton County
- Remington
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Remington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Remington
- Remington is located in Hamilton County
- Branch Hill
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Branch Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Branch Hill
- Branch Hill is located in Clermont County
- Symmes
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Symmes have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Symmes
- Symmes is located in Hamilton County
- Twenty Mile Stand
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Twenty Mile Stand have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twenty Mile Stand
- Twenty Mile Stand is located in Warren County
- Flockton
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Flockton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flockton
- Flockton is located in Butler County
- Jones ‑ Historic
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Jones have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones
- Jones is located in Butler County
- Stockton
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for Stockton
- Stockton is located in Butler County
Off-the-Road Links ...
The official website for Butler County: www.butlercountyohio.org/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rolling Knolls, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|