RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Sandusky County >> Rollersville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Rollersville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Rollersville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Rollersville is located in Sandusky County.

To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Sandusky County: Erie, Huron, Ottawa, Seneca & Wood.

Below are the counties that are near Rollersville. For each of these counties, we show a sample of those communities that are closest to Rollersville:

  • Sandusky County     (The home county of Rollersville)
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Helena
      (4 miles [6.4 km] to the east)
      • Note: The GPS coordinates that we are using for Helena have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Helena
      • Helena is located in Sandusky County
      • Population from the 2020 Census: 208 people
      • Jump to TripAdvisor's Tourism page for Helena <2>
    • Gibsonburg
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Gibsonburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gibsonburg
      • Gibsonburg is located in Sandusky County
      • Population from the 2020 Census: 2,483 people
      • Jump to TripAdvisor's Tourism page for Gibsonburg <2>
    • Woodville
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Woodville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodville
      • Woodville is located in Sandusky County
      • Population from the 2020 Census: 2,008 people
      • Jump to TripAdvisor's Tourism page for Woodville <2>
    • Burgoon
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Burgoon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burgoon
      • Burgoon is located in Sandusky County
      • Population from the 2020 Census: 163 people
    • Gabels Corner
      (9 miles [14.5 km] to the east)
      • Jump to our Gazetteer entry for Gabels Corner
      • Gabels Corner is located in Sandusky County
    • Lindsey
      (9 miles [14.5 km] to the northeast)
    • Stony Prairie
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Stony Prairie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stony Prairie
      • Stony Prairie is located in Sandusky County
    • Ballville
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Ballville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ballville
      • Ballville is located in Sandusky County
    • Fremont
      (13 miles [20.9 km] to the east)
    • Kingsway
      (13 miles [20.9 km] to the northeast)
      • Jump to our Gazetteer entry for Kingsway
      • Kingsway is located in Sandusky County
    • Shorewood Village
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Shorewood Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shorewood Village
      • Shorewood Village is located in Sandusky County
    • Green Creek
      (16 miles [25.7 km] to the east)
      • Jump to our Gazetteer entry for Green Creek
      • Green Creek is located in Sandusky County
  • Erie County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Bay View
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Bay View have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bay View
      • Bay View is located in Erie County
      • Population from the 2020 Census: 597 people
      • Jump to TripAdvisor's Tourism page for Bay View <2>
    • Castalia
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Castalia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Castalia
      • Castalia is located in Erie County
      • Population from the 2020 Census: 810 people
      • Jump to TripAdvisor's Tourism page for Castalia <2>
  • Hancock County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Arcadia
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arcadia
      • Arcadia is located in Hancock County
      • Population from the 2020 Census: 587 people
      • Jump to TripAdvisor's Tourism page for Arcadia <2>
    • West Independence
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for West Independence
      • West Independence is located in Hancock County
    • Van Buren
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Buren
      • Van Buren is located in Hancock County
      • Population from the 2020 Census: 538 people
      • Jump to TripAdvisor's Tourism page for Van Buren <2>
    • Findlay
      (24 miles [38.6 km] to the southwest)
    • Vanlue
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Vanlue
      • Vanlue is located in Hancock County
      • Population from the 2020 Census: 351 people
    • McComb
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for McComb have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McComb
      • McComb is located in Hancock County
      • Population from the 2020 Census: 1,632 people
      • Jump to TripAdvisor's Tourism page for McComb <2>
    • Hancock
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hancock have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hancock
      • Hancock is located in Hancock County
    • Lewisburg ‑ Historic
      (29 miles [46.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Lewisburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lewisburg
      • Lewisburg is located in Hancock County
  • Henry County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Deshler
      (28 miles [45.1 km] to the west)
    • McClure
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McClure
      • McClure is located in Henry County
      • Population from the 2020 Census: 678 people
      • Jump to TripAdvisor's Tourism page for McClure <2>
    • Colton
      (30 miles [48.3 km] to the west)
      • Jump to our Gazetteer entry for Colton
      • Colton is located in Henry County
  • Lucas County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Yondota
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Yondota
      • Yondota is located in Lucas County
    • Waterville
      (20 miles [32.2 km] to the northwest)
    • Bono
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Bono
      • Bono is located in Lucas County
    • East Toledo
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for East Toledo
      • East Toledo is located in Lucas County
    • Oregon
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Oregon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oregon
      • Oregon is located in Lucas County
      • Population from the 2020 Census: 20,016 people
      • Jump to TripAdvisor's Tourism page for Oregon <2>
    • Maumee
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Maumee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maumee
      • Maumee is located in Lucas County
      • Population from the 2020 Census: 13,605 people
      • Jump to TripAdvisor's Tourism page for Maumee <2>
    • Tondagamies Village ‑ Historic
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Tondagamies Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tondagamies Village
      • Tondagamies Village is located in Lucas County
    • Bailey ‑ Historic
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bailey
      • Bailey is located in Lucas County
      • Bailey has also been known as:
      • Bailey Station
    • Toledo
      (23 miles [37 km] to the north)
    • Harbor View
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Harbor View have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harbor View
      • Harbor View is located in Lucas County
      • Population from the 2020 Census: 108 people
    • Immergrun
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Immergrun
      • Immergrun is located in Lucas County
    • Holland
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holland
      • Holland is located in Lucas County
      • Population from the 2020 Census: 1,687 people
      • Jump to TripAdvisor's Tourism page for Holland <2>
  • Ottawa County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Elmore
      (10 miles [16.1 km] to the northeast)
    • Genoa
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Genoa have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Genoa
      • Genoa is located in Ottawa County
      • Population from the 2020 Census: 2,262 people
      • Jump to TripAdvisor's Tourism page for Genoa <2>
    • Martin
      (15 miles [24.1 km] to the north)
    • Rocky Ridge
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Rocky Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rocky Ridge
      • Rocky Ridge is located in Ottawa County
      • Population from the 2020 Census: 407 people
    • Clay Center
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Clay Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clay Center
      • Clay Center is located in Ottawa County
      • Population from the 2020 Census: 299 people
    • Oak Harbor
      (17 miles [27.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oak Harbor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Harbor
      • Oak Harbor is located in Ottawa County
      • Population from the 2020 Census: 2,692 people
      • Jump to TripAdvisor's Tourism page for Oak Harbor <2>
    • Curtice
      (19 miles [30.6 km] to the north)
    • Lacarne
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Lacarne
      • Lacarne is located in Ottawa County
    • Locust Point
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Locust Point
      • Locust Point is located in Ottawa County
    • Port Clinton
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Port Clinton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Port Clinton
      • Port Clinton is located in Ottawa County
      • Population from the 2020 Census: 6,133 people
      • Jump to TripAdvisor's Tourism page for Port Clinton <2>
    • Gypsum
      (28 miles [45.1 km] to the northeast)
  • Seneca County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Bettsville
      (10 miles [16.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bettsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bettsville
      • Bettsville is located in Seneca County
      • Population from the 2020 Census: 618 people
      • Jump to TripAdvisor's Tourism page for Bettsville <2>
    • Maple Grove
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Maple Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maple Grove
      • Maple Grove is located in Seneca County
    • Fostoria
      (12 miles [19.3 km] to the south)
    • Cromers
      (13 miles [20.9 km] to the southeast)
      • Jump to our Gazetteer entry for Cromers
      • Cromers is located in Seneca County
    • Fort Seneca
      (14 miles [22.5 km] to the southeast)
      • Jump to our Gazetteer entry for Fort Seneca
      • Fort Seneca is located in Seneca County
    • Bascom
      (15 miles [24.1 km] to the south)
    • Green Springs
      (17 miles [27.4 km] to the east)
    • Watson
      (17 miles [27.4 km] to the southeast)
      • Jump to our Gazetteer entry for Watson
      • Watson is located in Seneca County
      • Watson has also been known as:
      • Watson Station
      • Watsons Station
    • Tiffin
      (18 miles [29 km] to the southeast)
    • Alvada
      (20 miles [32.2 km] to the south)
      • Jump to our Gazetteer entry for Alvada
      • Alvada is located in Seneca County
    • New Riegel
      (20 miles [32.2 km] to the south)
    • Berwick
      (21 miles [33.8 km] to the south)
      • Jump to our Gazetteer entry for Berwick
      • Berwick is located in Seneca County
  • Wood County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Bradner
      (3 miles [4.8 km] to the west)
      • Note: The GPS coordinates that we are using for Bradner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bradner
      • Bradner is located in Wood County
      • Population from the 2020 Census: 1,020 people
      • Jump to TripAdvisor's Tourism page for Bradner <2>
    • Risingsun
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Risingsun
      • Risingsun is located in Wood County
      • Population from the 2020 Census: 630 people
      • Risingsun has also been known as:
      • Risingsun village
    • Wayne
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wayne
      • Wayne is located in Wood County
      • Population from the 2020 Census: 925 people
      • Jump to TripAdvisor's Tourism page for Wayne <2>
    • Pemberville
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pemberville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pemberville
      • Pemberville is located in Wood County
      • Population from the 2020 Census: 1,422 people
      • Jump to TripAdvisor's Tourism page for Pemberville <2>
    • West Millgrove
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Millgrove
      • West Millgrove is located in Wood County
      • Population from the 2020 Census: 176 people
    • Luckey
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Luckey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Luckey
      • Luckey is located in Wood County
      • Population from the 2020 Census: 1,049 people
      • Jump to TripAdvisor's Tourism page for Luckey <2>
    • Six Points
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Six Points have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Six Points
      • Six Points is located in Wood County
    • Lemoyne
      (11 miles [17.7 km] to the northwest)
      • Jump to our Gazetteer entry for Lemoyne
      • Lemoyne is located in Wood County
    • Eagleville
      (13 miles [20.9 km] to the southwest)
      • Jump to our Gazetteer entry for Eagleville
      • Eagleville is located in Wood County
    • Jerry City
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jerry City
      • Jerry City is located in Wood County
      • Population from the 2020 Census: 437 people
    • Portage
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Portage have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Portage
      • Portage is located in Wood County
      • Population from the 2020 Census: 490 people
    • Bloomdale
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bloomdale
      • Bloomdale is located in Wood County
      • Population from the 2020 Census: 682 people
      • Jump to TripAdvisor's Tourism page for Bloomdale <2>
  • Wyandot County
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Carey
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Carey
      • Carey is located in Wyandot County
      • Population from the 2020 Census: 3,540 people
      • Jump to TripAdvisor's Tourism page for Carey <2>
    • Mexico
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Mexico
      • Mexico is located in Wyandot County
    • Sycamore
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Sycamore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sycamore
      • Sycamore is located in Wyandot County
      • Population from the 2020 Census: 811 people
    • Belle Vernon
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Belle Vernon
      • Belle Vernon is located in Wyandot County
  • Monroe County (MI)
    • The following are listed by their distance from Rollersville, with the one closest to Rollersville listed first.
    • Havre
      (30 miles [48.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Havre. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Havre
      • Havre is located in Monroe County (MI)
    • Liberty Corners
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Liberty Corners
      • Liberty Corners is located in Monroe County (MI)
    • Lambertville
      (30 miles [48.3 km] to the northwest)

For an expanded list of the communities that are closest to Rollersville, see our County-by-County Page for Rollersville.

Newspapers Published in Rollersville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 48 newspapers that have been published in the area around Rollersville.

Although we're unaware of any newspapers that were published in the immediate area of Rollersville, there are papers which were published within 18 miles [29 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Rollersville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Rollersville:

Cemeteries Near Rollersville ...

Below are cemeteries that are in the vicinity of Rollersville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Rollersville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Rollersville, with the one closest to Rollersville listed first.

  • Pember Farm Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Pember Farm Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pember Farm Cemetery
  • Quinshan Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Quinshan Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Quinshan Cemetery
  • Bradner Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Bradner Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bradner Cemetery
  • St. Jacobs Evangelical Lutheran Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the St. Jacobs Evangelical Lutheran Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Jacobs Evangelical Lutheran Cemetery
  • West Union Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the West Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the West Union Cemetery
  • Trinity Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Trinity Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Trinity Cemetery
  • Metzgar Cemetery
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for the Metzgar Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Metzgar Cemetery
  • Eisenhour Cemetery
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Eisenhour Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Eisenhour Cemetery
  • Graham Cemetery
    (5 miles [8 km] to the southwest)
  • North Union Cemetery
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the North Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the North Union Cemetery
  • St. Lawrence Cemetery
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the St. Lawrence Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Lawrence Cemetery
  • St. Marys Cemetery
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for the St. Marys Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Marys Cemetery
  • Continue List   (344 more) ...
    • Pemberville Cemetery
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Pemberville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Pemberville Cemetery
    • Fish Cemetery
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for the Fish Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Fish Cemetery
    • Myers Cemetery
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for the Myers Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Myers Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

The Rand McNally Atlas shows that Rollersville had a population of 58 people in 1895 with a post office and no railroad service.

These communities are listed based on their distance from Rollersville, with the one closest to Rollersville listed first.

  • Bradner
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Bradner have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bradner
    • Bradner is located in Wood County
    • Population from the 2020 Census: 1,020 people
    • Jump to TripAdvisor's Tourism page for Bradner <2>
  • Tinney
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Tinney have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tinney
    • Tinney is located in Sandusky County
  • Helena
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Helena have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Helena
    • Helena is located in Sandusky County
    • Population from the 2020 Census: 208 people
    • Jump to TripAdvisor's Tourism page for Helena <2>
  • Gibsonburg
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Gibsonburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gibsonburg
    • Gibsonburg is located in Sandusky County
    • Population from the 2020 Census: 2,483 people
    • Jump to TripAdvisor's Tourism page for Gibsonburg <2>
  • Woodside
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Woodside have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodside
    • Woodside is located in Wood County
  • Risingsun
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for Risingsun
    • Risingsun is located in Wood County
    • Population from the 2020 Census: 630 people
    • Risingsun has also been known as:
    • Risingsun village
  • Millersville
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Millersville
    • Millersville is located in Sandusky County
  • Pemberville
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pemberville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pemberville
    • Pemberville is located in Wood County
    • Population from the 2020 Census: 1,422 people
    • Jump to TripAdvisor's Tourism page for Pemberville <2>
  • New Rochester
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for New Rochester have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Rochester
    • New Rochester is located in Wood County
  • Hatton
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hatton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hatton
    • Hatton is located in Wood County
  • Woodville
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Woodville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodville
    • Woodville is located in Sandusky County
    • Population from the 2020 Census: 2,008 people
    • Jump to TripAdvisor's Tourism page for Woodville <2>
  • West Millgrove
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Millgrove
    • West Millgrove is located in Wood County
    • Population from the 2020 Census: 176 people
  • Continue List   (16 more) ...
    • Amsden
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Amsden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Amsden
      • Amsden is located in Seneca County
    • Kansas
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kansas have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kansas
      • Kansas is located in Seneca County
    • Burgoon
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Burgoon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burgoon
      • Burgoon is located in Sandusky County
      • Population from the 2020 Census: 163 people

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Rollersville. See our List of 1890's Communities around Rollersville.

Unfortunately, we don't know of a website for Rollersville. If you can help, please contact us through our Feedback Page.

The official website for Sandusky County: www.sandusky-county.org/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Rollersville) to Point B.Our distance measurements begin at a specific point in Rollersville. The point we use is located at these GPS coordinates - Latitude: 41.3409, Longitude: -83.3783       In this case, the coordinates for Rollersville have been provided by the Geographic Names Information System (GNIS).
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rollersville, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024